From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/13] ARM: pxa: Access SMEMC via virtual addresses
Date: Sun, 10 Oct 2010 04:03:21 +0200 [thread overview]
Message-ID: <201010100403.22064.marek.vasut@gmail.com> (raw)
In-Reply-To: <AANLkTikPa+5gp13mLdFYhvcwGdXuPU4th_9CxdFsoC4u@mail.gmail.com>
Dne Ne 10. ??jna 2010 02:31:24 Haojian Zhuang napsal(a):
> On Sun, Oct 10, 2010 at 6:39 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > This is important because on PXA3xx, the physical mapping of SMEMC
> > registers differs from the one on PXA2xx. In order to get PCMCIA working
> > on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as
> > well.
> >
> > Also, various places in the kernel had to be patched to use
> > __raw_read/__raw_write.
> >
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > ---
[SNIP]
> > @@ -205,19 +218,18 @@ pxa2xx_pcmcia_frequency_change(struct
> > soc_pcmcia_socket *skt, static void pxa2xx_configure_sockets(struct
> > device *dev)
> > {
> > struct pcmcia_low_level *ops = dev->platform_data;
> > -
> > /*
> > * We have at least one socket, so set MECR:CIT
> > * (Card Is There)
> > */
> > - MECR |= MECR_CIT;
> > + uint32_t mecr = MECR_CIT;
> >
> > /* Set MECR:NOS (Number Of Sockets) */
> > if ((ops->first + ops->nr) > 1 ||
> > machine_is_viper() || machine_is_arcom_zeus())
> > - MECR |= MECR_NOS;
> > - else
> > - MECR &= ~MECR_NOS;
> > + mecr |= MECR_NOS;
> > +
> > + __raw_writel(mecr, MECR);
>
> In original, it only wants MECR |= MECR_NOS. But now, it becomes MECR
> = MECR_NOS. The meaning is changed.
The meaning is actually still the same, check the datasheet.
I admit the logic has changed a bit though.
Are you fine with having it this way ?
Cheers
>
> > }
> >
> > static const char *skt_names[] = {
> > @@ -272,14 +284,24 @@ static int pxa2xx_drv_pcmcia_probe(struct
> > platform_device *dev) struct soc_pcmcia_socket *skt;
> >
> > ops = (struct pcmcia_low_level *)dev->dev.platform_data;
> > - if (!ops)
> > - return -ENODEV;
> > + if (!ops) {
> > + ret = -ENODEV;
> > + goto err0;
> > + }
> > +
> > + if (cpu_is_pxa320() && ops->nr > 1) {
> > + dev_err(&dev->dev, "pxa320 supports only one pcmcia
> > slot"); + ret = -EINVAL;
> > + goto err0;
> > + }
> >
> > pxa2xx_drv_pcmcia_ops(ops);
> >
> > sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
> > - if (!sinfo)
> > - return -ENOMEM;
> > + if (!sinfo) {
> > + ret = -ENOMEM;
> > + goto err0;
> > + }
> >
> > sinfo->nskt = ops->nr;
> >
> > @@ -295,18 +317,19 @@ static int pxa2xx_drv_pcmcia_probe(struct
> > platform_device *dev)
> >
> > ret = pxa2xx_drv_pcmcia_add_one(skt);
> > if (ret)
> > - break;
> > + goto err1;
> > }
> >
> > - if (ret) {
> > - while (--i >= 0)
> > - soc_pcmcia_remove_one(&sinfo->skt[i]);
> > - kfree(sinfo);
> > - } else {
> > - pxa2xx_configure_sockets(&dev->dev);
> > - dev_set_drvdata(&dev->dev, sinfo);
> > - }
> > + pxa2xx_configure_sockets(&dev->dev);
> > + dev_set_drvdata(&dev->dev, sinfo);
> >
> > + return 0;
> > +
> > +err1:
> > + while (--i >= 0)
> > + soc_pcmcia_remove_one(&sinfo->skt[i]);
> > + kfree(sinfo);
> > +err0:
> > return ret;
> > }
> >
> > --
> > 1.7.1
next prev parent reply other threads:[~2010-10-10 2:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-09 22:39 [PATCH 01/13] ARM: pxa: Introduce pxa[23]xx_map_io Marek Vasut
2010-10-09 22:39 ` [PATCH 02/13] ARM: pxa: Access SMEMC via virtual addresses Marek Vasut
2010-10-10 0:31 ` Haojian Zhuang
2010-10-10 2:03 ` Marek Vasut [this message]
2010-10-09 22:39 ` [PATCH 03/13] ARM: pxa: Toradex Colibri PXA270 CF support Marek Vasut
2010-10-09 22:39 ` [PATCH 04/13] ARM: pxa: Push Colibri evalboard MFP into module files Marek Vasut
2010-10-09 22:39 ` [PATCH 05/13] ARM: pxa: Add M41T00 RTC support into Colibri evalboard Marek Vasut
2010-10-09 22:39 ` [PATCH 06/13] ARM: pxa: Rename " Marek Vasut
2010-10-09 22:39 ` [PATCH 07/13] ARM: pxa: Colibri PXA320 PCMCIA driver Marek Vasut
2010-10-09 22:39 ` [PATCH 08/13] ARM: pxa: Modularize Palm Tungsten|C Marek Vasut
2010-10-09 22:39 ` [PATCH 09/13] UCB1400: Pass ucb1400-gpio data through ac97 bus Marek Vasut
2010-10-09 22:39 ` [PATCH 10/13] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270 Marek Vasut
2010-10-09 22:39 ` [PATCH 11/13] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC Marek Vasut
2010-10-09 22:39 ` [PATCH 12/13] ARM: pxa: Add gpio-leds and vibrator support to PalmTC Marek Vasut
2010-10-10 0:34 ` Haojian Zhuang
2010-10-10 2:04 ` Marek Vasut
2010-10-09 22:39 ` [PATCH 13/13] ARM: pxa: Fix pxa2xx-flash section mismatch Marek Vasut
2010-10-10 0:32 ` Haojian Zhuang
2010-10-10 2:05 ` Marek Vasut
2010-10-10 7:38 ` [PATCH 01/13] ARM: pxa: Introduce pxa[23]xx_map_io Igor Grinberg
2010-10-10 18:16 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201010100403.22064.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.