From: "Michael S. Tsirkin" <mst@redhat.com>
To: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: skandasa@cisco.com, adnan@khaleel.us, etmartin@cisco.com,
qemu-devel@nongnu.org, wexu2@cisco.com
Subject: [Qemu-devel] Re: [PATCH v4 02/15] pci: introduce helper functions to clear/set bits in configuration space
Date: Mon, 18 Oct 2010 08:32:37 +0200 [thread overview]
Message-ID: <20101018063237.GC19214@redhat.com> (raw)
In-Reply-To: <a1909c1c84166be63b37e2c8bd733cf40fe0e014.1287371107.git.yamahata@valinux.co.jp>
On Mon, Oct 18, 2010 at 12:17:43PM +0900, Isaku Yamahata wrote:
> This patch introduces helper functions to clear/set bits in configuration
> space. pci_{clear_set, clear, set}_bit_{byte, word, long, quad}().
> They will be used later.
>
> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
I am not very happy with the names we came up with.
pci_clear_bit_byte - it sounds like this clears bit *and* byte.
Also, this gets a mask, not a bit number as the name implies.
How about
pci_word_set_mask
pci_word_clear_mask
Other ideas?
> ---
> hw/pci.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 72 insertions(+), 0 deletions(-)
>
> diff --git a/hw/pci.h b/hw/pci.h
> index d8b399f..eafa9f3 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -323,6 +323,78 @@ pci_config_set_interrupt_pin(uint8_t *pci_config, uint8_t val)
> pci_set_byte(&pci_config[PCI_INTERRUPT_PIN], val);
> }
>
> +static inline void
> +pci_clear_set_bit_byte(uint8_t *config, uint8_t clear, uint8_t set)
> +{
> + pci_set_byte(config, (pci_get_byte(config) & ~clear) | set);
> +}
> +
> +static inline void
> +pci_clear_bit_byte(uint8_t *config, uint8_t clear)
> +{
> + pci_clear_set_bit_byte(config, clear, 0);
> +}
> +
> +static inline void
> +pci_set_bit_byte(uint8_t *config, uint8_t set)
> +{
> + pci_clear_set_bit_byte(config, 0, set);
> +}
> +
> +static inline void
> +pci_clear_set_bit_word(uint8_t *config, uint16_t clear, uint16_t set)
> +{
> + pci_set_word(config, (pci_get_word(config) & ~clear) | set);
> +}
> +
> +static inline void
> +pci_clear_bit_word(uint8_t *config, uint16_t clear)
> +{
> + pci_clear_set_bit_word(config, clear, 0);
> +}
> +
> +static inline void
> +pci_set_bit_word(uint8_t *config, uint16_t set)
> +{
> + pci_clear_set_bit_word(config, 0, set);
> +}
> +
> +static inline void
> +pci_clear_set_bit_long(uint8_t *config, uint32_t clear, uint32_t set)
> +{
> + pci_set_long(config, (pci_get_long(config) & ~clear) | set);
> +}
> +
> +static inline void
> +pci_clear_bit_long(uint8_t *config, uint32_t clear)
> +{
> + pci_clear_set_bit_long(config, clear, 0);
> +}
> +
> +static inline void
> +pci_set_bit_long(uint8_t *config, uint32_t set)
> +{
> + pci_clear_set_bit_long(config, 0, set);
> +}
> +
> +static inline void
> +pci_clear_set_bit_quad(uint8_t *config, uint64_t clear, uint64_t set)
> +{
> + pci_set_quad(config, (pci_get_quad(config) & ~clear) | set);
> +}
> +
> +static inline void
> +pci_clear_bit_quad(uint8_t *config, uint64_t clear)
> +{
> + pci_clear_set_bit_quad(config, clear, 0);
> +}
> +
> +static inline void
> +pci_set_bit_quad(uint8_t *config, uint64_t set)
> +{
> + pci_clear_set_bit_quad(config, 0, set);
> +}
> +
> typedef int (*pci_qdev_initfn)(PCIDevice *dev);
> typedef struct {
> DeviceInfo qdev;
> --
> 1.7.1.1
next prev parent reply other threads:[~2010-10-18 6:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-18 3:17 [Qemu-devel] [PATCH v4 00/15] pcie port switch emulators Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 01/15] pci: make pci_del_capability() update for w1cmask Isaku Yamahata
2010-10-18 6:06 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 02/15] pci: introduce helper functions to clear/set bits in configuration space Isaku Yamahata
2010-10-18 5:42 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 6:32 ` Michael S. Tsirkin [this message]
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 03/15] pci: use pci_clear_bit_word() in pci_device_reset() Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 04/15] pci: record which is written into pci configuration space Isaku Yamahata
2010-10-18 5:38 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 7:17 ` Isaku Yamahata
2010-10-18 7:32 ` Michael S. Tsirkin
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 05/15] pci/bridge: fix pci_bridge_reset() Isaku Yamahata
2010-10-18 6:22 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 7:10 ` Isaku Yamahata
2010-10-18 7:08 ` Michael S. Tsirkin
2010-10-18 7:44 ` Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 06/15] msi: implements msi Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 07/15] pcie: add pcie constants to pcie_regs.h Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 08/15] pcie: helper functions for pcie capability and extended capability Isaku Yamahata
2010-10-18 5:38 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 09/15] pcie/aer: helper functions for pcie aer capability Isaku Yamahata
2010-10-18 5:45 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 10/15] pcie port: define struct PCIEPort/PCIESlot and helper functions Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 11/15] ioh3420: pcie root port in X58 ioh Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 12/15] x3130: pcie upstream port Isaku Yamahata
2010-10-18 4:59 ` [Qemu-devel] " Michael S. Tsirkin
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 13/15] x3130: pcie downstream port Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 14/15] pcie/hotplug: introduce pushing attention button command Isaku Yamahata
2010-10-18 3:17 ` [Qemu-devel] [PATCH v4 15/15] pcie/aer: glue aer error injection into qemu monitor Isaku Yamahata
2010-10-18 6:24 ` [Qemu-devel] Re: [PATCH v4 00/15] pcie port switch emulators Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101018063237.GC19214@redhat.com \
--to=mst@redhat.com \
--cc=adnan@khaleel.us \
--cc=etmartin@cisco.com \
--cc=qemu-devel@nongnu.org \
--cc=skandasa@cisco.com \
--cc=wexu2@cisco.com \
--cc=yamahata@valinux.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.