From: Myron Stowe <myron.stowe@hp.com>
To: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org, ak@linux.intel.com, ying.huang@intel.com
Subject: [PATCH 3/7] ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
Date: Thu, 21 Oct 2010 14:23:59 -0600 [thread overview]
Message-ID: <20101021202359.9220.72989.stgit@bob.kio> (raw)
In-Reply-To: <20101021201916.9220.5711.stgit@bob.kio>
Add remapping and unmapping interfaces for ACPI registers that are
backed by memory mapped I/O (MMIO). These interfaces, along with
the MMIO remapping list, enable accesses of such registers from within
interrupt context.
ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
Structure".
Signed-off-by: Myron Stowe <myron.stowe@hp.com>
---
drivers/acpi/osl.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/acpi.h | 3 +++
2 files changed, 41 insertions(+), 0 deletions(-)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index bd72129..fc6c5d2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -372,6 +372,44 @@ void __init early_acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
__acpi_unmap_table(virt, size);
}
+int acpi_os_map_generic_address(struct acpi_generic_address *addr)
+{
+ void __iomem *virt;
+
+ if (addr->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return 0;
+
+ if (!addr->address || !addr->bit_width)
+ return -EINVAL;
+
+ virt = acpi_os_map_memory(addr->address, addr->bit_width / 8);
+ if (!virt)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_os_map_generic_address);
+
+void acpi_os_unmap_generic_address(struct acpi_generic_address *addr)
+{
+ void __iomem *virt;
+ unsigned long flags;
+ acpi_size size = addr->bit_width / 8;
+
+ if (addr->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return;
+
+ if (!addr->address || !addr->bit_width)
+ return;
+
+ spin_lock_irqsave(&acpi_ioremap_lock, flags);
+ virt = acpi_map_vaddr_lookup(addr->address, size);
+ spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
+
+ acpi_os_unmap_memory(virt, size);
+}
+EXPORT_SYMBOL_GPL(acpi_os_unmap_generic_address);
+
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_os_get_physical_address(void *virt, acpi_physical_address * phys)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c227757..7774e6d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -308,6 +308,9 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
u32 *mask, u32 req);
extern void acpi_early_init(void);
+int acpi_os_map_generic_address(struct acpi_generic_address *addr);
+void acpi_os_unmap_generic_address(struct acpi_generic_address *addr);
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
next prev parent reply other threads:[~2010-10-21 20:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-21 20:23 [PATCH 0/7] ACPI: Memory Mapped I/O (MMIO) pre-mapping Myron Stowe
2010-10-21 20:23 ` [PATCH 1/7] ACPI: Fix ioremap size for MMIO reads and writes Myron Stowe
2010-10-21 20:23 ` [PATCH 2/7] ACPI: Maintain a list of ACPI memory mapped I/O remappings Myron Stowe
2010-10-21 20:23 ` Myron Stowe [this message]
2010-10-21 20:24 ` [PATCH 4/7] ACPI: Pre-map 'system event' related register blocks Myron Stowe
2010-10-21 20:24 ` [PATCH 5/7] ACPI: Convert simple locking to RCU based locking Myron Stowe
2010-10-21 20:24 ` [PATCH 6/7] ACPI: Page based coalescing of I/O remappings optimization Myron Stowe
2010-10-22 1:03 ` Huang Ying
2010-10-22 3:23 ` Myron Stowe
2010-10-22 5:17 ` Huang Ying
2010-10-22 16:27 ` Myron Stowe
2010-10-25 1:22 ` Huang Ying
2010-10-21 20:24 ` [PATCH 7/7] ACPI: Re-factor and remove ./drivers/acpi/atomicio.[ch] Myron Stowe
2010-10-22 2:43 ` [PATCH 0/7] ACPI: Memory Mapped I/O (MMIO) pre-mapping Shaohua Li
2010-10-22 2:57 ` Huang Ying
2010-10-22 3:16 ` Shaohua Li
2010-10-22 3:24 ` Huang Ying
2010-10-22 17:10 ` Bjorn Helgaas
2010-10-25 8:34 ` Andi Kleen
2010-10-25 8:43 ` Huang Ying
2010-10-25 9:29 ` Andi Kleen
2010-10-25 3:38 ` Len Brown
2010-10-25 15:34 ` Myron Stowe
2010-10-25 18:34 ` Andi Kleen
2010-10-28 1:53 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101021202359.9220.72989.stgit@bob.kio \
--to=myron.stowe@hp.com \
--cc=ak@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.