From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla-daemon@bugzilla.kernel.org Subject: [Bug 16072] [HP Pavilion dm1-1110ev] Cpufreq doesn't work at all ( Intel Celeron U2300 ) Date: Fri, 22 Oct 2010 23:52:37 GMT Message-ID: <201010222352.o9MNqbjN011090@demeter2.kernel.org> References: Mime-Version: 1.0 Return-path: In-Reply-To: Sender: cpufreq-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@vger.kernel.org https://bugzilla.kernel.org/show_bug.cgi?id=16072 --- Comment #18 from Thomas Renninger 2010-10-22 23:52:22 --- Sigh, a p4_clockmod discussion again. I promised myself to stay out of those, but as you provide quite some wrong information let's clear some things up: > This shiould not be closed as an "undicumemented bug". The machine is a > standard HP Pavilion A630N machine (presumably which hundreds of thousands > were manufactured in the 2003-2005 time frame). Which does not support CPU frequency scaling, where is the problem? The CPU itself simply cannot do it. > In monitoring the Gentoo bug framework I am aware that there are laptops > being manufactured to date (2010) which contain Bios which do not contain > the proper code to properly inform about the BIOS capabilities. This has nothing to do with BIOS capabilities. > There are two dividing lines -- some people want their machine to be > responsive -- and that may have prompted the change in p4-clockmod.c This high transition latency will cause that you cannot properly work with it. It may not be that bad if you use it as a server without user interaction, but also there p4_clockmod will not save any/much power, see below. > And I can watch the power consumption decrease on a Watt-Meter which the > machine is plugged into. How much is this for a totally idle system? Please try again, I do not believe this. Hmm, this machine does not even support C2... Still I doubt you gain any/much power consumption with p4_clockmod. Can you do some checks please if you still have the power meter and measure power consumption if: 1) p4_clockmod not used and machine is as idle as possible (top, kill some processes if necessary) 2) p4_clockmod is used and machine is as idle as possible (top, kill some processes if necessary). 3) Fully utilized CPU (do "cat /dev/zero >/dev/null &" two or three times and kill it again after measuring) with p4_clockmod unused 4) Fully utilized CPU (do "cat /dev/zero >/dev/null &" two or three times and kill it again after measuring) with p4_clockmod used 5) You should see such a line in dmesg: "using mwait in idle threads" If this is the case try: idle=halt boot param and measure the same as done in 1. (double check that the message in dmesg disappeared). -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.