All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andres Salomon <dilinger@queued.net>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-geode@lists.infradead.org, linux-kernel@vger.kernel.org,
	akpm@linux-foundation.org, cjb@laptop.org, dsd@laptop.org
Subject: [PATCH 1/4] MFD: add cs5535-mfd driver for CS5535/CS5536 support
Date: Sat, 23 Oct 2010 00:41:02 -0700	[thread overview]
Message-ID: <20101023004102.674cdc45@queued.net> (raw)


Add an MFD driver to handle the ISA device on CS5535 and CS5536 southbridges.
This ISA bridge is actually multiple devices; GPIOs, MFGPTs, etc.

Signed-off-by: Andres Salomon <dilinger@queued.net>
---
 drivers/mfd/Kconfig      |    8 +++
 drivers/mfd/Makefile     |    1 +
 drivers/mfd/cs5535-mfd.c |  151 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mfd/cs5535-mfd.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index db51ea1..b72627b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -495,6 +495,14 @@ config AB3550_CORE
 	  LEDs, vibrator, system power and temperature, power management
 	  and ALSA sound.
 
+config MFD_CS5535
+	tristate "Support for CS5535 and CS5536 southbridge core functions"
+	select MFD_CORE
+	depends on PCI
+	---help---
+	  This is the core driver for CS5535/CS5536 MFD functions.  This is
+          necessary for using the board's GPIO and MFGPT functionality.
+
 config MFD_TIMBERDALE
 	tristate "Support for the Timberdale FPGA"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index feaeeae..3d1b41a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-spi.o
+obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c
new file mode 100644
index 0000000..b141ca7
--- /dev/null
+++ b/drivers/mfd/cs5535-mfd.c
@@ -0,0 +1,151 @@
+/*
+ * cs5535-mfd.c - core MFD driver for CS5535/CS5536 southbridges
+ *
+ * The CS5535 and CS5536 has an ISA bridge on the PCI bus that is
+ * used for accessing GPIOs, MFGPTs, ACPI, etc.  Each subdevice has
+ * an IO range that's specified in a single BAR.  The BAR order is
+ * hardcoded in the CS553x specifications.
+ *
+ * Copyright (c) 2010  Andres Salomon <dilinger@queued.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#define DRV_NAME "cs5535-mfd"
+
+enum cs5535_mfd_bars {
+	SMB_BAR = 0,
+	GPIO_BAR = 1,
+	MFGPT_BAR = 2,
+	PMS_BAR = 4,
+	ACPI_BAR = 5,
+	NR_BARS,
+};
+
+static __devinitdata struct resource cs5535_mfd_resources[NR_BARS];
+
+static __devinitdata struct mfd_cell cs5535_mfd_cells[] = {
+	{
+		.id = SMB_BAR,
+		.name = "cs5535-smb",
+		.num_resources = 1,
+		.resources = &cs5535_mfd_resources[SMB_BAR],
+	},
+	{
+		.id = GPIO_BAR,
+		.name = "cs5535-gpio",
+		.num_resources = 1,
+		.resources = &cs5535_mfd_resources[GPIO_BAR],
+	},
+	{
+		.id = MFGPT_BAR,
+		.name = "cs5535-mfgpt",
+		.num_resources = 1,
+		.resources = &cs5535_mfd_resources[MFGPT_BAR],
+	},
+	{
+		.id = PMS_BAR,
+		.name = "cs5535-pms",
+		.num_resources = 1,
+		.resources = &cs5535_mfd_resources[PMS_BAR],
+	},
+	{
+		.id = ACPI_BAR,
+		.name = "cs5535-acpi",
+		.num_resources = 1,
+		.resources = &cs5535_mfd_resources[ACPI_BAR],
+	},
+};
+
+static int __devinit cs5535_mfd_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	int err, i;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	/* fill in IO range for each cell; subdrivers handle the region */
+	for (i = 0; i < ARRAY_SIZE(cs5535_mfd_cells); i++) {
+		int bar = cs5535_mfd_cells[i].id;
+		struct resource *r = &cs5535_mfd_resources[bar];
+
+		r->flags = IORESOURCE_IO;
+		r->start = pci_resource_start(pdev, bar);
+		r->end = pci_resource_end(pdev, bar);
+
+		/* id is used for temporarily storing BAR; unset it now */
+		cs5535_mfd_cells[i].id = 0;
+	}
+
+	err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells,
+			ARRAY_SIZE(cs5535_mfd_cells), NULL, 0);
+	if (err) {
+		dev_err(&pdev->dev, "MFD add devices failed: %d\n", err);
+		goto err_disable;
+	}
+
+	dev_info(&pdev->dev, "%d devices registered.\n",
+			ARRAY_SIZE(cs5535_mfd_cells));
+
+	return 0;
+
+err_disable:
+	pci_disable_device(pdev);
+	return err;
+}
+
+static void __devexit cs5535_mfd_remove(struct pci_dev *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id cs5535_mfd_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, cs5535_mfd_pci_tbl);
+
+static struct pci_driver cs5535_mfd_drv = {
+	.name = DRV_NAME,
+	.id_table = cs5535_mfd_pci_tbl,
+	.probe = cs5535_mfd_probe,
+	.remove = __devexit_p(cs5535_mfd_remove),
+};
+
+static int __init cs5535_mfd_init(void)
+{
+	return pci_register_driver(&cs5535_mfd_drv);
+}
+
+static void __exit cs5535_mfd_exit(void)
+{
+	pci_unregister_driver(&cs5535_mfd_drv);
+}
+
+module_init(cs5535_mfd_init);
+module_exit(cs5535_mfd_exit);
+
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
+MODULE_DESCRIPTION("MFD driver for CS5535/CS5536 southbridge's ISA PCI device");
+MODULE_LICENSE("GPL");
-- 
1.7.1


             reply	other threads:[~2010-10-23  7:41 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-23  7:41 Andres Salomon [this message]
2010-11-12  8:47 ` [PATCH 1/4] MFD: add cs5535-mfd driver for CS5535/CS5536 support Andres Salomon
2010-11-12 10:21   ` Samuel Ortiz
2010-11-26 10:57 ` Samuel Ortiz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101023004102.674cdc45@queued.net \
    --to=dilinger@queued.net \
    --cc=akpm@linux-foundation.org \
    --cc=cjb@laptop.org \
    --cc=dsd@laptop.org \
    --cc=linux-geode@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.