From: Pavel Machek <pma@sysgo.com>
To: kernel list <linux-kernel@vger.kernel.org>,
chunkeey@googlemail.com, linux-wireless@vger.kernel.org
Subject: carl9170 disconnects under load
Date: Tue, 26 Oct 2010 12:48:11 +0200 [thread overview]
Message-ID: <20101026104811.GA11357@pma.sysgo.com> (raw)
Hi!
I'm testing driver from -wireless testing, cca 2.6.26-rc7.
It seems to work (up to 802.11n speeds -- I've seen iwconfig claiming
121 MB/sec), but disconnects rather quickly when under load:
telnet 192.168.1.3 chargen > /dev/null
The machine is powerpc mpc5200b board, with OHCI driver -- it is not
capable of USB2.0 speeds.
Any ideas?
Pavel
wlan0: RX AssocResp from 00:23:f8:5d:76:93 (capab=0xc21 status=0
aid=1)
wlan0: associated
ieee80211 phy2: Allocated STA 00:23:f8:5d:76:93
ieee80211 phy2: Inserted STA 00:23:f8:5d:76:93
ieee80211 phy2: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023
txop=0 uapsd=0
ieee80211 phy2: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023
txop=0 uapsd=0
ieee80211 phy2: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15
txop=94 uapsd=0
ieee80211 phy2: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47
uapsd=0
Open BA session requested for 00:23:f8:5d:76:93 tid 0
activated addBA response timer on tid 0
switched off addBA timer for tid 0
Aggregation is on for tid 0
Rx A-MPDU request on tid 0 result 0
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
net_ratelimit: 79 callbacks suppressed
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
net_ratelimit: 58 callbacks suppressed
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
usb 1-1: USB disconnect, address 6
Tx BA session stop requested for 00:23:f8:5d:76:93 tid 0
Rx BA session stop requested for 00:23:f8:5d:76:93 tid 0
wlan0: deauthenticating from 00:23:f8:5d:76:93 by local choice
(reason=3)
Tx BA session stop requested for 00:23:f8:5d:76:93 tid 0
ieee80211 phy2: Removed STA 00:23:f8:5d:76:93
ieee80211 phy2: Destroyed STA 00:23:f8:5d:76:93
ieee80211 phy2: device now idle
next reply other threads:[~2010-10-26 10:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-26 10:48 Pavel Machek [this message]
2010-11-01 9:31 ` carl9170 disconnects under load Pavel Machek
2010-11-01 9:46 ` Pavel Machek
2010-11-01 10:10 ` Pavel Machek
2010-11-01 12:11 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101026104811.GA11357@pma.sysgo.com \
--to=pma@sysgo.com \
--cc=chunkeey@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.