From: Benjamin LaHaise <bcrl@kvack.org>
To: linux-scsi@vger.kernel.org
Subject: Re: [RFC/PATCH] add PCI id for HighPoint RocketRAID 2720 to mvsas
Date: Thu, 28 Oct 2010 22:24:47 -0400 [thread overview]
Message-ID: <20101029022447.GL23388@kvack.org> (raw)
In-Reply-To: <20101020223110.GT2315@kvack.org>
Hello all,
On Wed, Oct 20, 2010 at 06:31:10PM -0400, Benjamin LaHaise wrote:
> I recently built a system using the HighPoint 2720 SAS controller, which
> is based on the Marvell 88SE9485. In my limited testing (read: it boots),
> the following patch is needed to get mvsas to recognize the board. With
> this patch, the system boots without issue and SATA passthrough seems to
> work. Note that I have not tested the board with any SAS drives, as I
> only have SATA drives at present. Any thoughts/comments on if anything
> further is needed for this board?
No luck with this. Under testing it eventually starts reporting bad
sectors on writes. Does anyone have any pointers for docs on the mvsas
chips that I could use for debugging this? For that matter, am I using
the right description for the 88SE9485?
-ben
next prev parent reply other threads:[~2010-10-29 2:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 22:31 [RFC/PATCH] add PCI id for HighPoint RocketRAID 2720 to mvsas Benjamin LaHaise
2010-10-29 2:24 ` Benjamin LaHaise [this message]
2010-10-29 5:23 ` Ron Pitts
2010-10-29 5:37 ` Benjamin LaHaise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101029022447.GL23388@kvack.org \
--to=bcrl@kvack.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.