From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] various at91 patches to make some boards compilable again
Date: Mon, 01 Nov 2010 10:30:59 +0100 [thread overview]
Message-ID: <20101101093059.AB0321354EC@gemini.denx.de> (raw)
In-Reply-To: <201011010950.05938.alexander.stein@systec-electronic.com>
Dear Alexander Stein,
In message <201011010950.05938.alexander.stein@systec-electronic.com> you wrote:
>
> Well, I have only occasional access to at91sam9g20ek and at91sam9263ek atm.
If U-Boot has been tested on these boards, you can list yourself as
maintainer. If any later changes should require testing and you find
yourself in a position that you cannot do that any more (for whatever
reason), we can still orphan or even remove these boards.
> All other boards were just done by adjusting the same things. I'm unsure how
> well I could maintain those boards.
Agreed.
> > But if we receive no positive test reports in some time, those boards
> > ultimately have to be deleted.
> >
> > I can only test on an at91sam9xe-ek.
Well, I suggest we add respective notes to the MAINTAINERS file: in
addition to the "orphaned" group of boards, we could add an "orphaned
/ untested / remove-list" group entry.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"At least they're __________EXPERIENCED incompetents"
next prev parent reply other threads:[~2010-11-01 9:30 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-01 8:29 [U-Boot] various at91 patches to make some boards compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 01/11] at91sam9260: Replace PHYS_SDRAM with CONFIG_SYS_SDRAM_BASE Alexander Stein
2010-11-01 9:33 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 02/11] at91: Add USART & DBGU base address defines Alexander Stein
2010-11-01 10:57 ` Andreas Bießmann
2010-11-01 11:05 ` Alexander Stein
2010-11-01 11:26 ` Andreas Bießmann
2010-11-01 12:17 ` Reinhard Meyer
2010-11-02 10:42 ` Reinhard Meyer
2010-11-02 14:11 ` [U-Boot] [RFC] AT91 cleanup, was: " Reinhard Meyer
2010-11-03 7:18 ` Alexander Stein
2010-11-03 9:17 ` Reinhard Meyer
2010-11-03 9:29 ` Andreas Bießmann
2010-11-03 10:03 ` Reinhard Meyer
2010-11-03 10:25 ` Andreas Bießmann
2010-11-03 10:20 ` [U-Boot] [PATCH 1/2] [RFC] AVR32: move memory-map.h to hardware.h Andreas Bießmann
2010-11-03 15:02 ` Reinhard Meyer
2010-11-03 15:37 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 0/2] adopt avr32 to latest changes in u-boot-atmel/at91cleanup-rework Andreas Bießmann
2010-11-05 9:15 ` [U-Boot] [PATCH v2 1/2] avr32: rename memory-map.h -> hardware.h Andreas Bießmann
2011-04-11 8:55 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 2/2] avr32: fixup definitions to ATMEL_BASE_xxx Andreas Bießmann
2010-11-05 10:34 ` Reinhard Meyer
2011-04-11 8:58 ` Reinhard Meyer
2010-11-03 10:20 ` [U-Boot] [PATCH 2/2] [RFC] drivers:atmel-related: fixup include to hardware.h Andreas Bießmann
2010-11-03 15:04 ` Reinhard Meyer
2010-11-01 8:29 ` [U-Boot] [PATCH 03/11] at91: Use AT91_USART0_BASE instead of AT91_USART0 Alexander Stein
2010-11-01 10:56 ` Andreas Bießmann
2010-11-01 8:29 ` [U-Boot] [PATCH 04/11] at91sam9260ek: Convert to SoC Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 05/11] at91: Fix pdc register names and add some defines Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 06/11] at91: Add defines for spi SoC access Alexander Stein
2010-11-01 8:43 ` Reinhard Meyer
2010-11-01 8:52 ` Alexander Stein
2010-11-01 9:36 ` Wolfgang Denk
2010-11-01 12:31 ` Reinhard Meyer
2010-11-01 13:34 ` Alexander Stein
2010-11-04 16:07 ` Thomas Petazzoni
2010-11-01 8:29 ` [U-Boot] [PATCH 07/11] at91: Add spi base addresses Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 08/11] atmel_dataflash: Update to SoC access Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 09/11] at91sam9261ek: make compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 10/11] at91sam9263ek: " Alexander Stein
2010-11-01 9:39 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 11/11] at91cap9adk: " Alexander Stein
2010-11-01 8:40 ` [U-Boot] various at91 patches to make some boards " Reinhard Meyer
2010-11-01 8:50 ` Alexander Stein
2010-11-01 9:30 ` Wolfgang Denk [this message]
2010-11-01 11:09 ` Andreas Bießmann
2011-01-27 19:18 ` Remy Bohmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101101093059.AB0321354EC@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.