From: Alex Williamson <alex.williamson@redhat.com>
To: kvm@vger.kernel.org, mst@redhat.com
Cc: qemu-devel@nongnu.org, alex.williamson@redhat.com, chrisw@redhat.com
Subject: [PATCH v2 6/9] device-assignment: Move PCI capabilities to match physical hardware
Date: Fri, 12 Nov 2010 10:46:52 -0700 [thread overview]
Message-ID: <20101112174650.3169.6341.stgit@s20.home> (raw)
In-Reply-To: <20101112173929.3169.47618.stgit@s20.home>
Now that common PCI code doesn't have a hangup on capabilities
being contiguous, move assigned device capabilities to match
their offset on physical hardware. This helps for drivers that
assume a capability configuration and don't bother searching.
We can also remove several calls to assigned_dev_pci_read_* because
we're overlaying the capability at the same location as the initial
copy we made of config space. We can therefore just use pci_get_*.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
hw/device-assignment.c | 67 +++++++++++++++---------------------------------
1 files changed, 21 insertions(+), 46 deletions(-)
diff --git a/hw/device-assignment.c b/hw/device-assignment.c
index 322fa9f..39f19be 100644
--- a/hw/device-assignment.c
+++ b/hw/device-assignment.c
@@ -366,16 +366,6 @@ static uint8_t assigned_dev_pci_read_byte(PCIDevice *d, int pos)
return (uint8_t)assigned_dev_pci_read(d, pos, 1);
}
-static uint16_t assigned_dev_pci_read_word(PCIDevice *d, int pos)
-{
- return (uint16_t)assigned_dev_pci_read(d, pos, 2);
-}
-
-static uint32_t assigned_dev_pci_read_long(PCIDevice *d, int pos)
-{
- return assigned_dev_pci_read(d, pos, 4);
-}
-
static uint8_t pci_find_cap_offset(PCIDevice *d, uint8_t cap)
{
int id;
@@ -1285,6 +1275,7 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev)
{
AssignedDevice *dev = container_of(pci_dev, AssignedDevice, dev);
PCIRegion *pci_region = dev->real_device.regions;
+ int pos;
/* Clear initial capabilities pointer and status copied from hw */
pci_set_byte(pci_dev->config + PCI_CAPABILITY_LIST, 0);
@@ -1296,60 +1287,44 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev)
#ifdef KVM_CAP_DEVICE_MSI
/* Expose MSI capability
* MSI capability is the 1st capability in capability config */
- if (pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSI)) {
- int vpos, ppos;
- uint16_t flags;
-
+ if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSI))) {
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSI;
- vpos = pci_add_capability(pci_dev, PCI_CAP_ID_MSI,
- PCI_CAPABILITY_CONFIG_MSI_LENGTH);
-
- memset(pci_dev->config + vpos + PCI_CAP_FLAGS, 0,
- PCI_CAPABILITY_CONFIG_MSI_LENGTH - PCI_CAP_FLAGS);
+ pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_MSI, pos,
+ PCI_CAPABILITY_CONFIG_MSI_LENGTH);
/* Only 32-bit/no-mask currently supported */
- ppos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSI);
- flags = assigned_dev_pci_read_word(pci_dev, ppos + PCI_MSI_FLAGS);
- flags &= PCI_MSI_FLAGS_QMASK;
- pci_set_word(pci_dev->config + vpos + PCI_MSI_FLAGS, flags);
+ pci_set_word(pci_dev->config + pos + PCI_MSI_FLAGS,
+ pci_get_word(pci_dev->config + pos + PCI_MSI_FLAGS) &
+ PCI_MSI_FLAGS_QMASK);
+ pci_set_long(pci_dev->config + pos + PCI_MSI_ADDRESS_LO, 0);
+ pci_set_word(pci_dev->config + pos + PCI_MSI_DATA_32, 0);
/* Set writable fields */
- pci_set_word(pci_dev->wmask + vpos + PCI_MSI_FLAGS,
+ pci_set_word(pci_dev->wmask + pos + PCI_MSI_FLAGS,
PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
- pci_set_long(pci_dev->wmask + vpos + PCI_MSI_ADDRESS_LO, 0xfffffffc);
- pci_set_long(pci_dev->wmask + vpos + PCI_MSI_DATA_32, 0xffff);
+ pci_set_long(pci_dev->wmask + pos + PCI_MSI_ADDRESS_LO, 0xfffffffc);
+ pci_set_word(pci_dev->wmask + pos + PCI_MSI_DATA_32, 0xffff);
}
#endif
#ifdef KVM_CAP_DEVICE_MSIX
/* Expose MSI-X capability */
- if (pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSIX)) {
- int vpos, ppos, entry_nr, bar_nr;
+ if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSIX))) {
+ int bar_nr;
uint32_t msix_table_entry;
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSIX;
- vpos = pci_add_capability(pci_dev, PCI_CAP_ID_MSIX,
- PCI_CAPABILITY_CONFIG_MSIX_LENGTH);
+ pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_MSIX, pos,
+ PCI_CAPABILITY_CONFIG_MSIX_LENGTH);
- memset(pci_dev->config + vpos + PCI_CAP_FLAGS, 0,
- PCI_CAPABILITY_CONFIG_MSIX_LENGTH - PCI_CAP_FLAGS);
+ pci_set_word(pci_dev->config + pos + PCI_MSIX_FLAGS,
+ pci_get_word(pci_dev->config + pos + PCI_MSIX_FLAGS) &
+ PCI_MSIX_TABSIZE);
/* Only enable and function mask bits are writable */
- pci_set_word(pci_dev->wmask + vpos + PCI_MSIX_FLAGS,
+ pci_set_word(pci_dev->wmask + pos + PCI_MSIX_FLAGS,
PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
- ppos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSIX);
-
- entry_nr = assigned_dev_pci_read_word(pci_dev, ppos + PCI_MSIX_FLAGS);
- entry_nr &= PCI_MSIX_TABSIZE;
- pci_set_word(pci_dev->config + vpos + PCI_MSIX_FLAGS, entry_nr);
-
- msix_table_entry = assigned_dev_pci_read_long(pci_dev,
- ppos + PCI_MSIX_TABLE);
- pci_set_long(pci_dev->config + vpos + PCI_MSIX_TABLE, msix_table_entry);
-
- pci_set_long(pci_dev->config + vpos + PCI_MSIX_PBA,
- assigned_dev_pci_read_long(pci_dev, ppos + PCI_MSIX_PBA));
-
+ msix_table_entry = pci_get_long(pci_dev->config + pos + PCI_MSIX_TABLE);
bar_nr = msix_table_entry & PCI_MSIX_BIR;
msix_table_entry &= ~PCI_MSIX_BIR;
dev->msix_table_addr = pci_region[bar_nr].base_addr + msix_table_entry;
next prev parent reply other threads:[~2010-11-12 17:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-12 17:45 [PATCH v2 0/9] PCI capability and device assignment improvements Alex Williamson
2010-11-12 17:46 ` [PATCH v2 1/9] pci: pci_default_cap_write_config ignores wmask Alex Williamson
2010-11-13 21:09 ` Michael S. Tsirkin
2010-11-16 21:33 ` Marcelo Tosatti
2010-11-12 17:46 ` [PATCH v2 2/9] pci: Remove pci_enable_capability_support() Alex Williamson
2010-11-12 17:46 ` [PATCH v2 3/9] device-assignment: Use PCI capabilities support Alex Williamson
2010-11-12 17:46 ` [PATCH v2 4/9] pci: Replace used bitmap with capability byte map Alex Williamson
2010-11-12 17:46 ` [PATCH v2 5/9] pci: Remove cap.length, cap.start, cap.supported Alex Williamson
2010-11-12 17:46 ` Alex Williamson [this message]
2010-11-12 17:47 ` [PATCH v2 7/9] pci: Pass ID for capability read/write handlers Alex Williamson
2010-11-12 17:47 ` [PATCH v2 8/9] pci: Remove capability read/write config handlers Alex Williamson
2010-11-12 17:47 ` [PATCH v2 9/9] pci: Store capability offsets in PCIDevice Alex Williamson
2010-11-13 21:05 ` Michael S. Tsirkin
2010-11-15 3:49 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101112174650.3169.6341.stgit@s20.home \
--to=alex.williamson@redhat.com \
--cc=chrisw@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.