From: Dimitri Sivanich <sivanich@sgi.com>
To: linux-kernel@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>
Subject: [PATCH] x86 UV: Address interrupt/IO port operation conflict
Date: Tue, 16 Nov 2010 16:23:52 -0600 [thread overview]
Message-ID: <20101116222352.GA8155@sgi.com> (raw)
This patch for SGI UV systems addresses a problem whereby interrupt
transactions being looped back from a local IOH, through the hub to a
local CPU can (erroneously) conflict with IO port operations and other
transactions.
To workaound this we set a high bit in the APIC IDs used for interrupts.
This bit appears to be ignored by the sockets, but it avoids the
conflict in the hub.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
___
arch/x86/include/asm/uv/uv_hub.h | 4 ++++
arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++-
arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++--
arch/x86/platform/uv/tlb_uv.c | 2 +-
arch/x86/platform/uv/uv_time.c | 4 +++-
5 files changed, 49 insertions(+), 5 deletions(-)
Index: linux/arch/x86/include/asm/uv/uv_hub.h
===================================================================
--- linux.orig/arch/x86/include/asm/uv/uv_hub.h
+++ linux/arch/x86/include/asm/uv/uv_hub.h
@@ -199,6 +199,8 @@ union uvh_apicid {
#define UVH_APICID 0x002D0E00L
#define UV_APIC_PNODE_SHIFT 6
+#define UV_APICID_HIBIT_MASK 0xffff0000
+
/* Local Bus from cpu's perspective */
#define LOCAL_BUS_BASE 0x1c00000
#define LOCAL_BUS_SIZE (4 * 1024 * 1024)
@@ -491,8 +493,10 @@ static inline void uv_set_cpu_scir_bits(
}
}
+extern unsigned int uv_apicid_hibits;
static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
{
+ apicid |= uv_apicid_hibits;
return (1UL << UVH_IPI_INT_SEND_SHFT) |
((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
Index: linux/arch/x86/include/asm/uv/uv_mmrs.h
===================================================================
--- linux.orig/arch/x86/include/asm/uv/uv_mmrs.h
+++ linux/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
*
* SGI UV MMR definitions
*
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_MMRS_H
@@ -753,6 +753,23 @@ union uvh_lb_bau_sb_descriptor_base_u {
} s;
};
+/* ========================================================================= */
+/* UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+ unsigned long v;
+ struct uvh_lb_target_physical_apic_id_mask_s {
+ unsigned long bit_enables : 32; /* RW */
+ unsigned long rsvd_32_63 : 32; /* */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_NODE_ID */
/* ========================================================================= */
Index: linux/arch/x86/kernel/apic/x2apic_uv_x.c
===================================================================
--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -44,6 +44,8 @@ static u64 gru_start_paddr, gru_end_padd
static union uvh_apicid uvh_apicid;
int uv_min_hub_revision_id;
EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
static DEFINE_SPINLOCK(uv_nmi_lock);
static inline bool is_GRU_range(u64 start, u64 end)
@@ -85,6 +87,23 @@ static void __init early_get_apic_pnode_
uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
}
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB. This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+ union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+ unsigned long *mmr;
+
+ mmr = early_ioremap(UV_LOCAL_MMR_BASE |
+ UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr));
+ apicid_mask.v = *mmr;
+ early_iounmap(mmr, sizeof(*mmr));
+ uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
int nodeid;
@@ -102,6 +121,7 @@ static int __init uv_acpi_madt_oem_check
__get_cpu_var(x2apic_extra_bits) =
nodeid << (uvh_apicid.s.pnode_shift - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
+ uv_set_apicid_hibit();
return 1;
}
}
@@ -155,6 +175,7 @@ static int __cpuinit uv_wakeup_secondary
int pnode;
pnode = uv_apicid_to_pnode(phys_apicid);
+ phys_apicid |= uv_apicid_hibits;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +257,7 @@ static unsigned int uv_cpu_mask_to_apici
int cpu = cpumask_first(cpumask);
if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_apicid, cpu);
+ return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
else
return BAD_APICID;
}
@@ -255,7 +276,7 @@ uv_cpu_mask_to_apicid_and(const struct c
if (cpumask_test_cpu(cpu, cpu_online_mask))
break;
}
- return per_cpu(x86_cpu_to_apicid, cpu);
+ return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
}
static unsigned int x2apic_get_apic_id(unsigned long x)
Index: linux/arch/x86/platform/uv/tlb_uv.c
===================================================================
--- linux.orig/arch/x86/platform/uv/tlb_uv.c
+++ linux/arch/x86/platform/uv/tlb_uv.c
@@ -1455,7 +1455,7 @@ static void __init uv_init_uvhub(int uvh
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = uvhub_to_first_apicid(uvhub);
+ apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
((apicid << 32) | vector));
}
Index: linux/arch/x86/platform/uv/uv_time.c
===================================================================
--- linux.orig/arch/x86/platform/uv/uv_time.c
+++ linux/arch/x86/platform/uv/uv_time.c
@@ -89,6 +89,7 @@ static void uv_rtc_send_IPI(int cpu)
apicid = cpu_physical_id(cpu);
pnode = uv_apicid_to_pnode(apicid);
+ apicid |= uv_apicid_hibits;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(apicid << UVH_IPI_INT_APIC_ID_SHFT) |
(X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -107,6 +108,7 @@ static int uv_intr_pending(int pnode)
static int uv_setup_intr(int cpu, u64 expires)
{
u64 val;
+ unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
int pnode = uv_cpu_to_pnode(cpu);
uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
@@ -117,7 +119,7 @@ static int uv_setup_intr(int cpu, u64 ex
UVH_EVENT_OCCURRED0_RTC1_MASK);
val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
- ((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+ ((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
/* Set configuration */
uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);
next reply other threads:[~2010-11-16 22:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-16 22:23 Dimitri Sivanich [this message]
2010-11-18 14:07 ` [tip:x86/urgent] x86: UV: Address interrupt/IO port operation conflict tip-bot for Dimitri Sivanich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101116222352.GA8155@sgi.com \
--to=sivanich@sgi.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.