From mboxrd@z Thu Jan 1 00:00:00 1970 From: Petr =?iso-8859-2?Q?=A9tetiar?= Date: Fri, 19 Nov 2010 19:34:28 +0100 Subject: [ath9k-devel] ath9k_htc, 2.6.36 and "Target is unresponsive" error In-Reply-To: <20101119122737.GP15069@ibawizard.net> References: <20101119110559.GO15069@ibawizard.net> <20101119122737.GP15069@ibawizard.net> Message-ID: <20101119183428.GQ15069@ibawizard.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Petr ?tetiar [2010-11-19 13:27:37]: > Mohammed Shafi [2010-11-19 17:36:27]: > > > May be the firmware gets loaded/activated only when the device pugged in? > > 1. some message about CRDA regulatory domain > 2. messge about loaded firmware ~50kB from filename ar9271.fw > 3. "Target is unresponsive" error after reboot: [ 469.790000] usb 1-3: ath9k_htc: Transferred FW: ar9271.fw, size: 51280 [ 470.790000] usb 1-3: ath9k_htc: Target is unresponsive [ 470.790000] Failed to initialize the device [ 470.810000] ath9k_hif_usb: probe of 1-3:1.0 failed with error -22 [ 470.820000] usbcore: registered new interface driver ath9k_hif_usb replug: [ 477.060000] usb 1-3: USB disconnect, address 2 [ 478.780000] usb 1-3: new full speed USB device using ep93xx-ohci and address 3 [ 478.980000] usb 1-3: New USB device found, idVendor=0cf3, idProduct=1006 [ 478.980000] usb 1-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 479.010000] usb 1-3: Product: USB2.0 WLAN [ 479.010000] usb 1-3: Manufacturer: ATHEROS [ 479.020000] usb 1-3: SerialNumber: 12345 [ 479.470000] usb 1-3: ath9k_htc: Transferred FW: ar9271.fw, size: 51280 [ 479.760000] usb 1-3: ath9k_htc: HTC initialized with 33 credits [ 485.670000] cfg80211: Calling CRDA for country: CN [ 485.700000] usb 1-3: ath9k_htc: USB layer initialized -- ynezz