From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arkadiusz Miskiewicz Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02) Date: Fri, 19 Nov 2010 19:39:07 +0100 Message-ID: <201011191939.07573.a.miskiewicz@gmail.com> References: <201011191842.25939.a.miskiewicz@gmail.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail-ew0-f46.google.com ([209.85.215.46]:45036 "EHLO mail-ew0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754936Ab0KSSjM convert rfc822-to-8bit (ORCPT ); Fri, 19 Nov 2010 13:39:12 -0500 Received: by ewy5 with SMTP id 5so692097ewy.19 for ; Fri, 19 Nov 2010 10:39:11 -0800 (PST) In-Reply-To: <201011191842.25939.a.miskiewicz@gmail.com> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Eric Moore Cc: DL-MPTFusionLinux@lsi.com, linux-scsi@vger.kernel.org On Friday 19 of November 2010, Arkadiusz Miskiewicz wrote: > Hi, >=20 > I wonder if mptsas driver is able to support this hardware? >=20 > 04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS= 1068 > PCI- X Fusion-MPT SAS [1000:0055] (rev 02) > Subsystem: Intel Corporation Device [8086:3504] >=20 > Currently driver doesn't handle 1000:0055 pciid. The problem seems qu= ite > old since I found someone asking for it long time ago > http://lkml.org/lkml/2007/1/23/87 [root@rescue mptsas]# echo 1000 0055 > new_id [root@rescue mptsas]# drives were detected, I was able to create filesystem, write, read few = files and these short tests worked well.=20 So I wonder what's the case with it not being added to mptsas driver? T= hanks. [ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) ->= IRQ 16 [ 5689.436886] mptbase: ioc0: Initiating bringup [ 5690.042770] ioc0: : Capabilities=3D{Initiator} [ 5699.421066] scsi8 : ioc0: , FwRev=3D01120000h, Ports=3D1, MaxQ=3D511= , IRQ=3D16 [ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id= 0, phy 0, sas_addr 0x1221000000000000 [ 5699.461495] scsi 8:0:0:0: Direct-Access ATA ST9500420AS = SDM1 PQ: 0 ANSI: 5 [ 5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (50= 0 GB/465 GiB) [ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id= 1, phy 1, sas_addr 0x1221000001000000 [ 5699.466599] sd 8:0:0:0: Attached scsi generic sg0 type 0 [ 5699.469232] scsi 8:0:1:0: Direct-Access ATA ST9500420AS = SDM1 PQ: 0 ANSI: 5 [ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1 type 0 [ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (50= 0 GB/465 GiB) [ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off [ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08 [ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off [ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08 [ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enab= led, doesn't support DPO or FUA [ 5699.827135] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enab= led, doesn't support DPO or FUA [ 5699.928108] sda: [ 5699.933163] sdb: unknown partition table [ 5699.962440] unknown partition table [ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk [ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk --=20 Arkadiusz Mi=C5=9Bkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html