Re: am3517/05 : Add am3517-crane machine type

[Khem Raj <raj.khem@gmail.com>]

On (19/11/10 21:33), Anil wrote:
> Hi All,
> 
> Adding support for AM3517/05-Craneboard machine type to openembedded.
> 
> Craneboard is a hardware development platform based on the Sitara
> AM3517 ARM Cortex - A8 microprocessor device. This is a low cost
> reference design.
> 
> These patches adds support for craneboard  x-load,  u-boot and
> kernel along with configuration file for openembedded.

Thanks for patches. Could you break them up into individual patches
and send them to ml so people can look at the parts they are interested in
http://wiki.openembedded.org/index.php/How_to_submit_a_patch_to_OpenEmbedded


> 
>     [1] http://www.ti.com/arm
>     [2] http://www.mistralsolutions.com/products/craneboard.php
> 
> Please review and let me know your comments.
> 
> .--
> Thanks and regards
> Anil kumar .M
> 
> 
> 
> Please do not print this email unless it is absolutely necessary. Spread environmental awareness.
> 
> -------------------------------------------------------DISCLAIMER------------------------------------------------------
> The information transmitted herewith is confidential and proprietary information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
> ---------------------------------------------------------------------------------------------------------------------------


and cut such crap out in future. You are sending stuff to public mailing
lists. 

-Khem