From: Wu Fengguang <wfg@linux.intel.com>
To: David Henningsson <david.henningsson@canonical.com>
Cc: Takashi Iwai <tiwai@suse.de>,
ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: [PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
Date: Wed, 24 Nov 2010 00:16:54 +0800 [thread overview]
Message-ID: <20101123161654.GA1681@localhost> (raw)
In-Reply-To: <4CEBE081.10705@canonical.com>
On Tue, Nov 23, 2010 at 04:40:49PM +0100, David Henningsson wrote:
> On 2010-11-23 16:15, Wu Fengguang wrote:
> >>> From ca84aa8edbfb66e46266677249b141b5419d6e0a Mon Sep 17 00:00:00 2001
> >>From: David Henningsson<david.henningsson@canonical.com>
> >>Date: Tue, 23 Nov 2010 10:23:40 +0100
> >>Subject: [PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
> >>
> >>Some newer chips have more than one HDMI output, but usually not
> >
> >Please point out the model name here (where this patch actually makes
> >a difference)?
>
> I'm attaching the codec-proc file for the relevant machine, which
> lists as "Intel Cougarpoint HDMI".
For the record, here is the one I have.
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
Thanks,
Fengguang
---
Codec: Intel CougarPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862805
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 1", type="HDMI", device=7
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Device: name="HDMI 2", type="HDMI", device=8
Converter: stream=8, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=05, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=06, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=07, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
next prev parent reply other threads:[~2010-11-23 16:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-12 15:46 [PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI David Henningsson
2010-11-23 7:12 ` Takashi Iwai
2010-11-23 9:29 ` David Henningsson
2010-11-23 11:06 ` Wu Fengguang
2010-11-23 13:51 ` Takashi Iwai
2010-11-23 14:19 ` David Henningsson
2010-11-23 14:58 ` Wu Fengguang
2010-11-24 9:39 ` Takashi Iwai
2010-11-23 15:15 ` Wu Fengguang
2010-11-23 15:40 ` David Henningsson
2010-11-23 15:54 ` Wu Fengguang
2010-11-24 13:50 ` David Henningsson
2010-11-23 16:16 ` Wu Fengguang [this message]
2010-12-07 19:10 ` Takashi Iwai
2012-02-01 12:38 ` RIDDICC
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101123161654.GA1681@localhost \
--to=wfg@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=david.henningsson@canonical.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.