All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maciej Sosnowski <maciej.sosnowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Roland Dreier <rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	faisal.latif-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Subject: [PATCH 4/4] RDMA/nes: fix incorrect SFP link status detection on driver init
Date: Wed, 24 Nov 2010 18:29:54 +0100	[thread overview]
Message-ID: <20101124172953.14764.56132.stgit@linux.site> (raw)
In-Reply-To: <20101124172930.14764.20947.stgit-YbU/o29LwNHN0uC3ymp8PA@public.gmane.org>

During iw_nes initialization link status for SFP phy is always detected
as "up" regardless of real state (cable either connected or disconnected).
Add SFP phy specific link status detection to iw_nes initialization procedure.
Use link status recheck for netdev_open to detect delayed state updates.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---

 drivers/infiniband/hw/nes/nes_nic.c |   43 ++++++++++++++++++++++++++++++++---
 1 files changed, 39 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index b2101bc..3c4191e 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -241,6 +241,15 @@ static int nes_netdev_open(struct net_de
 		netif_carrier_on(netdev);
 	}
 
+	spin_lock_irqsave(&nesdev->nesadapter->phy_lock, flags);
+	if (nesdev->nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_SFP_D) {
+		if (nesdev->link_recheck)
+			cancel_delayed_work(&nesdev->work);
+		nesdev->link_recheck = 1;
+		schedule_delayed_work(&nesdev->work, NES_LINK_RECHECK_DELAY);
+	}
+	spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags);
+
 	spin_lock_irqsave(&nesvnic->port_ibevent_lock, flags);
 	if (nesvnic->of_device_registered) {
 		nesdev->nesadapter->send_term_ok = 1;
@@ -1782,8 +1791,11 @@ struct net_device *nes_netdev_init(struc
 	      (((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) ||
 	       ((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) {
 		u32 u32temp;
-		u32 link_mask;
-		u32 link_val;
+		u32 link_mask = 0;
+		u32 link_val = 0;
+		u16 temp_phy_data;
+		u16 phy_data = 0;
+		unsigned long flags;
 
 		u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
 				(0x200 * (nesdev->mac_index & 1)));
@@ -1805,6 +1817,23 @@ struct net_device *nes_netdev_init(struc
 				link_val = 0x02020000;
 			}
 			break;
+		case NES_PHY_TYPE_SFP_D:
+			spin_lock_irqsave(&nesdev->nesadapter->phy_lock, flags);
+			nes_read_10G_phy_reg(nesdev,
+					     nesdev->nesadapter->phy_index[nesdev->mac_index],
+					     1, 0x9003);
+			temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+			nes_read_10G_phy_reg(nesdev,
+					     nesdev->nesadapter->phy_index[nesdev->mac_index],
+					     3, 0x0021);
+			nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+			nes_read_10G_phy_reg(nesdev,
+					     nesdev->nesadapter->phy_index[nesdev->mac_index],
+					     3, 0x0021);
+			phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+			spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags);
+			phy_data = (!temp_phy_data && (phy_data == 0x8000)) ? 0x4 : 0x0;
+			break;
 		default:
 			link_mask = 0x0f1f0000;
 			link_val = 0x0f0f0000;
@@ -1814,8 +1843,14 @@ struct net_device *nes_netdev_init(struc
 		u32temp = nes_read_indexed(nesdev,
 					   NES_IDX_PHY_PCS_CONTROL_STATUS0 +
 					   (0x200 * (nesdev->mac_index & 1)));
-		if ((u32temp & link_mask) == link_val)
-			nesvnic->linkup = 1;
+
+		if (phy_type == NES_PHY_TYPE_SFP_D) {
+			if (phy_data & 0x0004)
+				nesvnic->linkup = 1;
+		} else {
+			if ((u32temp & link_mask) == link_val)
+				nesvnic->linkup = 1;
+		}
 
 		/* clear the MAC interrupt status, assumes direct logical to physical mapping */
 		u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index));

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2010-11-24 17:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-24 17:29 [PATCH 1/4] RDMA/nes: enable bonds on iw_nes Maciej Sosnowski
     [not found] ` <20101124172930.14764.20947.stgit-YbU/o29LwNHN0uC3ymp8PA@public.gmane.org>
2010-11-24 17:29   ` [PATCH 2/4] RDMA/nes: send IB_EVENT_PORT_ERR/PORT_ACTIVE event on link state interrupt Maciej Sosnowski
     [not found]     ` <20101124172938.14764.49859.stgit-YbU/o29LwNHN0uC3ymp8PA@public.gmane.org>
2010-11-24 19:56       ` Viral Mehta
     [not found]         ` <D69C90565D53114396BF743585AF5A09122E61E8AD-fVvhrSDAkVjuuPCCJ6VnObSn4PsL5ZDKvpI+GvaZM4lBDgjK7y7TUQ@public.gmane.org>
2010-11-26 13:18           ` Sosnowski, Maciej
2010-11-24 17:29   ` [PATCH 3/4] RDMA/nes: fix SFP link down detection issue with switch port disable Maciej Sosnowski
2010-11-24 17:29   ` Maciej Sosnowski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101124172953.14764.56132.stgit@linux.site \
    --to=maciej.sosnowski-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=faisal.latif-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.