From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: mtosatti@redhat.com, qemu-devel@nongnu.org, quintela@redhat.com
Subject: Re: [Qemu-devel] [PATCHv3 4/6] virtio-net: stop/start bh when appropriate
Date: Wed, 1 Dec 2010 08:02:52 +0200 [thread overview]
Message-ID: <20101201060252.GB9199@redhat.com> (raw)
In-Reply-To: <19701.57573.766694.450729@gargle.gargle.HOWL>
On Wed, Dec 01, 2010 at 01:45:09PM +0800, Jason Wang wrote:
> Michael S. Tsirkin writes:
> > Avoid sending out packets, and modifying
> > device state, when VM is stopped.
> > Add assert statements to verify this does not happen.
> >
> > Avoid scheduling bh when vhost-net is started.
> >
> > Stop bh when driver disabled bus mastering
> > (we must not access memory after this).
> >
> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> >
>
> There's no need to disable it bh we call qemu_aio_flush() after
> vm_state_notify() in do_vm_stop(). And for timer, looks like every device should
> stop its timer in vm state change handler, not only for virtio-net?
BTW I fixed some typos. Here a fixed version.
Jason, could you review/test please?
virtio-net: stop/start bh when appropriate
Avoid sending out packets, and modifying
memory, when VM is stopped.
Add assert statements to verify this does not happen.
Avoid scheduling bh when vhost-net is started.
Stop bh when driver disabled bus mastering
(we must not access memory after this).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 43a2b3d..5881961 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -99,9 +99,14 @@ static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config)
}
}
-static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
+static bool virtio_net_started(VirtIONet *n, uint8_t status)
+{
+ return (status & VIRTIO_CONFIG_S_DRIVER_OK) &&
+ (n->status & VIRTIO_NET_S_LINK_UP) && n->vm_running;
+}
+
+static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
{
- VirtIONet *n = to_virtio_net(vdev);
if (!n->nic->nc.peer) {
return;
}
@@ -112,9 +117,7 @@ static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
if (!tap_get_vhost_net(n->nic->nc.peer)) {
return;
}
- if (!!n->vhost_started == ((status & VIRTIO_CONFIG_S_DRIVER_OK) &&
- (n->status & VIRTIO_NET_S_LINK_UP) &&
- n->vm_running)) {
+ if (!!n->vhost_started == virtio_net_started(n, status)) {
return;
}
if (!n->vhost_started) {
@@ -131,6 +134,32 @@ static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
}
}
+static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
+{
+ VirtIONet *n = to_virtio_net(vdev);
+
+ virtio_net_vhost_status(n, status);
+
+ if (!n->tx_waiting) {
+ return;
+ }
+
+ if (virtio_net_started(n, status) && !n->vhost_started) {
+ if (n->tx_timer) {
+ qemu_mod_timer(n->tx_timer,
+ qemu_get_clock(vm_clock) + n->tx_timeout);
+ } else {
+ qemu_bh_schedule(n->tx_bh);
+ }
+ } else {
+ if (n->tx_timer) {
+ qemu_del_timer(n->tx_timer);
+ } else {
+ qemu_bh_cancel(n->tx_bh);
+ }
+ }
+}
+
static void virtio_net_set_link_status(VLANClientState *nc)
{
VirtIONet *n = DO_UPCAST(NICState, nc, nc)->opaque;
@@ -675,11 +704,12 @@ static int32_t virtio_net_flush_tx(VirtIONet *n, VirtQueue *vq)
{
VirtQueueElement elem;
int32_t num_packets = 0;
-
if (!(n->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
return num_packets;
}
+ assert(n->vm_running);
+
if (n->async_tx.elem.out_num) {
virtio_queue_set_notification(n->tx_vq, 0);
return num_packets;
@@ -738,6 +768,12 @@ static void virtio_net_handle_tx_timer(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIONet *n = to_virtio_net(vdev);
+ /* This happens when device was stopped but VCPU wasn't. */
+ if (!n->vm_running) {
+ n->tx_waiting = 1;
+ return;
+ }
+
if (n->tx_waiting) {
virtio_queue_set_notification(vq, 1);
qemu_del_timer(n->tx_timer);
@@ -758,14 +794,19 @@ static void virtio_net_handle_tx_bh(VirtIODevice *vdev, VirtQueue *vq)
if (unlikely(n->tx_waiting)) {
return;
}
+ n->tx_waiting = 1;
+ /* This happens when device was stopped but VCPU wasn't. */
+ if (!n->vm_running) {
+ return;
+ }
virtio_queue_set_notification(vq, 0);
qemu_bh_schedule(n->tx_bh);
- n->tx_waiting = 1;
}
static void virtio_net_tx_timer(void *opaque)
{
VirtIONet *n = opaque;
+ assert(n->vm_running);
n->tx_waiting = 0;
@@ -782,6 +823,8 @@ static void virtio_net_tx_bh(void *opaque)
VirtIONet *n = opaque;
int32_t ret;
+ assert(n->vm_running);
+
n->tx_waiting = 0;
/* Just in case the driver is not ready on more */
@@ -926,15 +969,6 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
}
}
n->mac_table.first_multi = i;
-
- if (n->tx_waiting) {
- if (n->tx_timer) {
- qemu_mod_timer(n->tx_timer,
- qemu_get_clock(vm_clock) + n->tx_timeout);
- } else {
- qemu_bh_schedule(n->tx_bh);
- }
- }
return 0;
}
next prev parent reply other threads:[~2010-12-01 6:03 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-24 15:52 [Qemu-devel] [PATCHv2 0/6] stable migration image on a stopped vm Michael S. Tsirkin
2010-11-24 15:52 ` [Qemu-devel] [PATCHv2 1/6] virtio-net: don't dma while vm is stopped Michael S. Tsirkin
2010-11-24 15:52 ` [Qemu-devel] [PATCHv2 2/6] cpus: flush all requests on each vm stop Michael S. Tsirkin
2010-11-30 12:45 ` Marcelo Tosatti
2010-11-30 13:14 ` Michael S. Tsirkin
2010-11-30 13:34 ` Michael S. Tsirkin
2010-11-30 13:46 ` Marcelo Tosatti
2010-11-30 14:05 ` Michael S. Tsirkin
2010-12-03 16:30 ` Marcelo Tosatti
2010-11-24 15:53 ` [Qemu-devel] [PATCHv2 3/6] migration/savevm: no need to flush requests Michael S. Tsirkin
2010-11-24 15:53 ` [Qemu-devel] [PATCHv2 4/6] virtio-net: stop/start bh on vm start/stop Michael S. Tsirkin
2010-11-29 15:37 ` [Qemu-devel] [PATCHv3 4/6] virtio-net: stop/start bh when appropriate Michael S. Tsirkin
2010-12-01 5:45 ` Jason Wang
2010-12-01 5:59 ` Michael S. Tsirkin
2010-12-03 8:40 ` Kevin Wolf
2010-12-01 6:02 ` Michael S. Tsirkin [this message]
2010-12-01 6:17 ` Jason Wang
2010-12-02 12:56 ` Jason Wang
2010-12-02 13:07 ` Michael S. Tsirkin
2010-12-02 13:08 ` Michael S. Tsirkin
2010-12-02 14:19 ` Jason Wang
2010-12-02 15:38 ` Michael S. Tsirkin
2010-12-03 13:32 ` Jason Wang
2010-12-02 18:27 ` Michael S. Tsirkin
2010-12-03 8:39 ` Kevin Wolf
2010-11-24 15:53 ` [Qemu-devel] [PATCHv2 5/6] migration: stable ram block ordering Michael S. Tsirkin
2010-11-24 15:53 ` [Qemu-devel] [PATCHv2 6/6] migration: allow rate > 4g Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101201060252.GB9199@redhat.com \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=mtosatti@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.