From: Ryan O'Hara <rohara@redhat.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH] fence_scsi_test: add 'clear' action
Date: Mon, 6 Dec 2010 18:30:27 -0600 [thread overview]
Message-ID: <20101207003027.GA16607@redhat.com> (raw)
Added new 'clear' action that will remove all registrations and
reservations on device(s). This action requires that the node be
registered with the devices to be cleared. See sg_persit(3) for
more information, specifically the -C option.
Resolves: rhbz#603838
Signed-off-by: Ryan O'Hara <rohara@redhat.com>
---
fence/agents/scsi/fence_scsi_test.pl | 87 ++++++++++++++++++++++++---------
1 files changed, 63 insertions(+), 24 deletions(-)
diff --git a/fence/agents/scsi/fence_scsi_test.pl b/fence/agents/scsi/fence_scsi_test.pl
index 25db6ba..5c2302c 100755
--- a/fence/agents/scsi/fence_scsi_test.pl
+++ b/fence/agents/scsi/fence_scsi_test.pl
@@ -68,6 +68,26 @@ sub do_action_off ($$$)
return ($err);
}
+sub do_action_clear ($$)
+{
+ my ($dev, $rk) = @_;
+
+ return (0) unless get_keys_register ($dev);
+
+ my $cmd = "sg_persist -n -o -C -K $rk -d $dev";
+ my @out = qx { $cmd 2> /dev/null };
+ my $err = ($?>>8);
+
+ if (defined $options{'v'}) {
+ $self = (caller(0))[3];
+ print " $self (dev=$dev rk=$rk)\n";
+ print " cmd=$cmd\n";
+ print " err=$err\n";
+ }
+
+ return ($err);
+}
+
sub do_verify_on (\@$$)
{
my @devices = @{(shift)};
@@ -119,6 +139,25 @@ sub do_verify_off ($$$)
return ($err);
}
+sub do_verify_clear ($$)
+{
+ my ($dev, $host_key) = @_;
+ my $err = 0;
+
+ if (defined $options{'v'}) {
+ $self = (caller(0))[3];
+ print " $self (dev=$dev host_key=$host_key)\n";
+ }
+
+ @keys = get_keys_register ($dev);
+
+ if (scalar (@keys) != 0) {
+ $err++;
+ }
+
+ return ($err);
+}
+
sub do_key_write ($)
{
my $key = shift;
@@ -259,24 +298,6 @@ sub do_preempt_abort ($$$)
return ($err);
}
-sub do_clear ($$)
-{
- my ($dev, $rk) = @_;
-
- my $cmd = "sg_persist -n -o -C -K $rk -d $dev";
- my @out = qx { $cmd 2> /dev/null };
- my $err = ($?>>8);
-
- if (defined $options{'v'}) {
- $self = (caller(0))[3];
- print " $self (dev=$dev rk=$rk)\n";
- print " cmd=$cmd\n";
- print " err=$err\n";
- }
-
- return ($err);
-}
-
sub do_reset ($)
{
my ($dev) = @_;
@@ -575,15 +596,17 @@ sub print_results ($)
sub print_usage
{
print "\n";
- print "Usage: fence_scsi_test -o <on|off> -k <key> [options]\n";
+ print "Usage: fence_scsi_test -o <action> [options]\n";
print "\n";
print "Actions:\n";
print "\n";
print " on Register <key> with the devices.\n";
- print " off Remove <key> form the devices.\n";
+ print " off Remove <key> from the devices.\n";
+ print " clear Remove all registrations from the devices.\n";
print "\n";
print "Options:\n";
print "\n";
+ print " -k, --key=VALUE Key to use with current action.\n";
print " -d, --devices=LIST Devices used for the current action.\n";
print " -h, --help Display this help and exit.\n";
print " -v, --verbose Verbose mode.\n";
@@ -622,10 +645,12 @@ if (defined $options{'t'}) {
}
}
-if ($options{'k'} =~ /^[[:xdigit:]]+$/) {
- $node_key = lc ($options{'k'});
-} else {
- print_usage ();
+if ($options{'o'} !~ /^clear$/i) {
+ if ($options{'k'} =~ /^[[:xdigit:]]+$/) {
+ $node_key = lc ($options{'k'});
+ } else {
+ print_usage ();
+ }
}
for ($options{'o'}) {
@@ -637,6 +662,10 @@ for ($options{'o'}) {
do_key_read (\$host_key);
last;
};
+ ($_ =~ /^clear/i) && do {
+ do_key_read (\$host_key);
+ last;
+ };
print_usage ();
}
@@ -690,5 +719,15 @@ for ($options{'o'}) {
print "\n" if (!defined $options{'v'});
last;
};
+ ($_ =~ /^clear$/i) && do {
+ print "\n" if (!defined $options{'v'});
+ foreach (@devices) {
+ $results{$_}[0] = do_action_clear ($devices_name{$_}, $host_key);
+ $results{$_}[1] = do_verify_clear ($devices_name{$_}, $host_key);
+ print_results ($_);
+ }
+ print "\n" if (!defined $options{'v'});
+ last;
+ };
print_usage ();
}
--
1.7.2.3
reply other threads:[~2010-12-07 0:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101207003027.GA16607@redhat.com \
--to=rohara@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.