All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bruno Randolf <br1@einfach.org>
To: johannes@sipsolutions.net, linville@tuxdriver.com
Cc: dhalperi@cs.washington.edu, linux-wireless@vger.kernel.org
Subject: [PATCH 1/3] cfg80211: Separate available antennas for RX and TX
Date: Thu, 16 Dec 2010 11:30:22 +0900	[thread overview]
Message-ID: <20101216023022.24356.22416.stgit@localhost6.localdomain6> (raw)

As has been pointed out by Daniel Halperin some devices (e.g. Intel IWL5100)
can only TX from a subset of RX antennas, so use separate availability masks
for RX and TX.

Signed-off-by: Bruno Randolf <br1@einfach.org>
---
 include/net/cfg80211.h |   12 +++++++++---
 net/wireless/nl80211.c |   17 ++++++++++-------
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f45e15f..4d410f3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1472,8 +1472,13 @@ struct ieee80211_txrx_stypes {
  *	transmitted through nl80211, points to an array indexed by interface
  *	type
  *
- * @available_antennas: bitmap of antennas which are available to configure.
- *	antenna configuration commands will be rejected unless this is set.
+ * @available_antennas_tx: bitmap of antennas which are available to be
+ *	configured as TX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_rx is set.
+ *
+ * @available_antennas_rx: bitmap of antennas which are available to be
+ *	configured as RX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_tx is set.
  *
  * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
  *	may request, if implemented.
@@ -1518,7 +1523,8 @@ struct wiphy {
 
 	u8 max_num_pmkids;
 
-	u32 available_antennas;
+	u32 available_antennas_tx;
+	u32 available_antennas_rx;
 
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 594a6ac..087397b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -605,7 +605,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL)
 		NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE);
 
-	if (dev->wiphy.available_antennas && dev->ops->get_antenna) {
+	if ((dev->wiphy.available_antennas_tx ||
+	     dev->wiphy.available_antennas_rx) && dev->ops->get_antenna) {
 		u32 tx_ant = 0, rx_ant = 0;
 		int res;
 		res = dev->ops->get_antenna(&dev->wiphy, &tx_ant, &rx_ant);
@@ -1107,7 +1108,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
 	    info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
 		u32 tx_ant, rx_ant;
-		if (!rdev->wiphy.available_antennas || !rdev->ops->set_antenna) {
+		if ((!rdev->wiphy.available_antennas_tx &&
+		     !rdev->wiphy.available_antennas_rx) ||
+		    !rdev->ops->set_antenna) {
 			result = -EOPNOTSUPP;
 			goto bad_res;
 		}
@@ -1116,15 +1119,15 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]);
 
 		/* reject antenna configurations which don't match the
-		 * available antenna mask, except for the "all" mask */
-		if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas)) ||
-		    (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas))) {
+		 * available antenna masks, except for the "all" mask */
+		if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas_tx)) ||
+		    (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas_rx))) {
 			result = -EINVAL;
 			goto bad_res;
 		}
 
-		tx_ant = tx_ant & rdev->wiphy.available_antennas;
-		rx_ant = rx_ant & rdev->wiphy.available_antennas;
+		tx_ant = tx_ant & rdev->wiphy.available_antennas_tx;
+		rx_ant = rx_ant & rdev->wiphy.available_antennas_rx;
 
 		result = rdev->ops->set_antenna(&rdev->wiphy, tx_ant, rx_ant);
 		if (result)


             reply	other threads:[~2010-12-16  2:29 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-16  2:30 Bruno Randolf [this message]
2010-12-16  2:30 ` [PATCH 2/3] nl80211: Export available antennas Bruno Randolf
2010-12-16  2:30 ` [PATCH 3/3] ath5k: Set available antenna information for cfg80211 Bruno Randolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101216023022.24356.22416.stgit@localhost6.localdomain6 \
    --to=br1@einfach.org \
    --cc=dhalperi@cs.washington.edu \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.