From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, Len Brown <lenb@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Linus Torvalds <torvalds@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>, Adam Belay <abelay@mit.edu>
Subject: [PATCH 1/9] Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
Date: Thu, 16 Dec 2010 10:38:20 -0700 [thread overview]
Message-ID: <20101216173820.8185.8804.stgit@bob.kio> (raw)
In-Reply-To: <20101216173614.8185.19462.stgit@bob.kio>
This reverts commit 82e3e767c21fef2b1b38868e20eb4e470a1e38e3.
We're going back to considering bus resources in the order we found
them (in _CRS order, when we're using _CRS), so we don't need to
define any ordering.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---
drivers/pci/bus.c | 70 ++++++++++++++++-------------------------------------
1 files changed, 21 insertions(+), 49 deletions(-)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 003170e..5624db8 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -64,57 +64,17 @@ void pci_bus_remove_resources(struct pci_bus *bus)
}
}
-static bool pci_bus_resource_better(struct resource *res1, bool pos1,
- struct resource *res2, bool pos2)
-{
- /* If exactly one is positive decode, always prefer that one */
- if (pos1 != pos2)
- return pos1 ? true : false;
-
- /* Prefer the one that contains the highest address */
- if (res1->end != res2->end)
- return (res1->end > res2->end) ? true : false;
-
- /* Otherwise, prefer the one with highest "center of gravity" */
- if (res1->start != res2->start)
- return (res1->start > res2->start) ? true : false;
-
- /* Otherwise, choose one arbitrarily (but consistently) */
- return (res1 > res2) ? true : false;
-}
-
-static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
-{
- struct pci_bus_resource *bus_res;
-
- /*
- * This relies on the fact that pci_bus.resource[] refers to P2P or
- * CardBus bridge base/limit registers, which are always positively
- * decoded. The pci_bus.resources list contains host bridge or
- * subtractively decoded resources.
- */
- list_for_each_entry(bus_res, &bus->resources, list) {
- if (bus_res->res == res)
- return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
- false : true;
- }
- return true;
-}
-
/*
- * Find the next-best bus resource after the cursor "res". If the cursor is
- * NULL, return the best resource. "Best" means that we prefer positive
- * decode regions over subtractive decode, then those at higher addresses.
+ * Find the highest-address bus resource below the cursor "res". If the
+ * cursor is NULL, return the highest resource.
*/
static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
unsigned int type,
struct resource *res)
{
- bool res_pos, r_pos, prev_pos = false;
struct resource *r, *prev = NULL;
int i;
- res_pos = pci_bus_resource_positive(bus, res);
pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
@@ -122,14 +82,26 @@ static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
if ((r->flags & IORESOURCE_TYPE_BITS) != type)
continue;
- r_pos = pci_bus_resource_positive(bus, r);
- if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
- if (!prev || pci_bus_resource_better(r, r_pos,
- prev, prev_pos)) {
- prev = r;
- prev_pos = r_pos;
- }
+ /* If this resource is at or past the cursor, skip it */
+ if (res) {
+ if (r == res)
+ continue;
+ if (r->end > res->end)
+ continue;
+ if (r->end == res->end && r->start > res->start)
+ continue;
}
+
+ if (!prev)
+ prev = r;
+
+ /*
+ * A small resource is higher than a large one that ends at
+ * the same address.
+ */
+ if (r->end > prev->end ||
+ (r->end == prev->end && r->start > prev->start))
+ prev = r;
}
return prev;
next prev parent reply other threads:[~2010-12-16 17:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-16 17:38 [PATCH 0/9] PCI: revert to allocating bottom-up, avoid E820 areas Bjorn Helgaas
2010-12-16 17:38 ` Bjorn Helgaas [this message]
2010-12-16 17:38 ` [PATCH 2/9] Revert "x86: allocate space within a region top-down" Bjorn Helgaas
2010-12-16 17:38 ` [PATCH 3/9] Revert "x86/PCI: allocate space from the end of a region, not the beginning" Bjorn Helgaas
2010-12-16 17:38 ` [PATCH 4/9] Revert "PCI: allocate bus resources from the top down" Bjorn Helgaas
2010-12-16 17:38 ` [PATCH 5/9] Revert "resources: support allocating space within a region " Bjorn Helgaas
2010-12-16 17:38 ` [PATCH 6/9] resources: add arch hook for preventing allocation in reserved areas Bjorn Helgaas
2010-12-16 22:03 ` Linus Torvalds
2010-12-16 22:56 ` Bjorn Helgaas
2010-12-16 23:17 ` Linus Torvalds
2010-12-16 17:38 ` [PATCH 7/9] x86: avoid low BIOS area when allocating address space Bjorn Helgaas
2010-12-16 17:38 ` [PATCH 8/9] x86: avoid E820 regions " Bjorn Helgaas
2010-12-19 9:50 ` Yinghai Lu
2010-12-19 23:33 ` Bjorn Helgaas
2010-12-16 17:39 ` [PATCH 9/9] x86: avoid high BIOS area " Bjorn Helgaas
2010-12-16 21:59 ` [PATCH 0/9] PCI: revert to allocating bottom-up, avoid E820 areas Linus Torvalds
2010-12-16 21:59 ` Linus Torvalds
2010-12-16 22:03 ` Jesse Barnes
2010-12-17 3:00 ` H. Peter Anvin
2010-12-17 16:00 ` Bjorn Helgaas
2010-12-19 14:31 ` David John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101216173820.8185.8804.stgit@bob.kio \
--to=bjorn.helgaas@hp.com \
--cc=abelay@mit.edu \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.