From: Christoph Hellwig <hch@lst.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 1/3] ide: factor dma handling helpers
Date: Mon, 20 Dec 2010 13:45:48 +0100 [thread overview]
Message-ID: <20101220124548.GA6395@lst.de> (raw)
Factor the DMA I/O path that is duplicated between read and write
commands, into common helpers using the s->is_read flag added for
the macio ATA controller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Index: qemu/hw/ide/core.c
===================================================================
--- qemu.orig/hw/ide/core.c 2010-12-17 11:38:48.992003425 +0100
+++ qemu/hw/ide/core.c 2010-12-17 11:48:43.252255415 +0100
@@ -487,16 +487,18 @@ static int ide_handle_rw_error(IDEState
return 1;
}
-void ide_read_dma_cb(void *opaque, int ret)
+void ide_dma_cb(void *opaque, int ret)
{
IDEState *s = opaque;
int n;
int64_t sector_num;
if (ret < 0) {
- if (ide_handle_rw_error(s, -ret,
- BM_STATUS_DMA_RETRY | BM_STATUS_RETRY_READ))
- {
+ int op = BM_STATUS_DMA_RETRY;
+
+ if (s->is_read)
+ op |= BM_STATUS_RETRY_READ;
+ if (ide_handle_rw_error(s, -ret, op)) {
return;
}
}
@@ -504,7 +506,7 @@ void ide_read_dma_cb(void *opaque, int r
n = s->io_buffer_size >> 9;
sector_num = ide_get_sector(s);
if (n > 0) {
- dma_buf_commit(s, 1);
+ dma_buf_commit(s, s->is_read);
sector_num += n;
ide_set_sector(s, sector_num);
s->nsector -= n;
@@ -514,32 +516,44 @@ void ide_read_dma_cb(void *opaque, int r
if (s->nsector == 0) {
s->status = READY_STAT | SEEK_STAT;
ide_set_irq(s->bus);
- eot:
- s->bus->dma->ops->add_status(s->bus->dma, BM_STATUS_INT);
- ide_set_inactive(s);
- return;
+ goto eot;
}
/* launch next transfer */
n = s->nsector;
- s->io_buffer_index = 0;
+ if (s->is_read)
+ s->io_buffer_index = 0;
s->io_buffer_size = n * 512;
- if (s->bus->dma->ops->prepare_buf(s->bus->dma, 1) == 0)
+ if (s->bus->dma->ops->prepare_buf(s->bus->dma, s->is_read) == 0)
goto eot;
+
#ifdef DEBUG_AIO
- printf("aio_read: sector_num=%" PRId64 " n=%d\n", sector_num, n);
+ printf("ide_dma_cb: sector_num=%" PRId64 " n=%d, is_read=%d\n",
+ sector_num, n, s->is_read);
#endif
- s->bus->dma->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num, ide_read_dma_cb, s);
- ide_dma_submit_check(s, ide_read_dma_cb);
+
+ if (s->is_read) {
+ s->bus->dma->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num,
+ ide_dma_cb, s);
+ } else {
+ s->bus->dma->aiocb = dma_bdrv_write(s->bs, &s->sg, sector_num,
+ ide_dma_cb, s);
+ }
+ ide_dma_submit_check(s, ide_dma_cb);
+ return;
+
+eot:
+ s->bus->dma->ops->add_status(s->bus->dma, BM_STATUS_INT);
+ ide_set_inactive(s);
}
-static void ide_sector_read_dma(IDEState *s)
+static void ide_sector_start_dma(IDEState *s, int is_read)
{
s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
s->io_buffer_index = 0;
s->io_buffer_size = 0;
- s->is_read = 1;
- s->bus->dma->ops->start_dma(s->bus->dma, s, ide_read_dma_cb);
+ s->is_read = is_read;
+ s->bus->dma->ops->start_dma(s->bus->dma, s, ide_dma_cb);
}
static void ide_sector_write_timer_cb(void *opaque)
@@ -594,57 +608,6 @@ void ide_sector_write(IDEState *s)
}
}
-void ide_write_dma_cb(void *opaque, int ret)
-{
- IDEState *s = opaque;
- int n;
- int64_t sector_num;
-
- if (ret < 0) {
- if (ide_handle_rw_error(s, -ret, BM_STATUS_DMA_RETRY))
- return;
- }
-
- n = s->io_buffer_size >> 9;
- sector_num = ide_get_sector(s);
- if (n > 0) {
- dma_buf_commit(s, 0);
- sector_num += n;
- ide_set_sector(s, sector_num);
- s->nsector -= n;
- }
-
- /* end of transfer ? */
- if (s->nsector == 0) {
- s->status = READY_STAT | SEEK_STAT;
- ide_set_irq(s->bus);
- eot:
- s->bus->dma->ops->add_status(s->bus->dma, BM_STATUS_INT);
- ide_set_inactive(s);
- return;
- }
-
- n = s->nsector;
- s->io_buffer_size = n * 512;
- /* launch next transfer */
- if (s->bus->dma->ops->prepare_buf(s->bus->dma, 0) == 0)
- goto eot;
-#ifdef DEBUG_AIO
- printf("aio_write: sector_num=%" PRId64 " n=%d\n", sector_num, n);
-#endif
- s->bus->dma->aiocb = dma_bdrv_write(s->bs, &s->sg, sector_num, ide_write_dma_cb, s);
- ide_dma_submit_check(s, ide_write_dma_cb);
-}
-
-static void ide_sector_write_dma(IDEState *s)
-{
- s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
- s->io_buffer_index = 0;
- s->io_buffer_size = 0;
- s->is_read = 0;
- s->bus->dma->ops->start_dma(s->bus->dma, s, ide_write_dma_cb);
-}
-
void ide_atapi_cmd_ok(IDEState *s)
{
s->error = 0;
@@ -1858,7 +1821,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t
if (!s->bs)
goto abort_cmd;
ide_cmd_lba48_transform(s, lba48);
- ide_sector_read_dma(s);
+ ide_sector_start_dma(s, 1);
break;
case WIN_WRITEDMA_EXT:
lba48 = 1;
@@ -1867,7 +1830,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t
if (!s->bs)
goto abort_cmd;
ide_cmd_lba48_transform(s, lba48);
- ide_sector_write_dma(s);
+ ide_sector_start_dma(s, 0);
s->media_changed = 1;
break;
case WIN_READ_NATIVE_MAX_EXT:
Index: qemu/hw/ide/internal.h
===================================================================
--- qemu.orig/hw/ide/internal.h 2010-12-17 11:42:29.538004334 +0100
+++ qemu/hw/ide/internal.h 2010-12-17 11:48:05.464261142 +0100
@@ -439,7 +439,6 @@ struct IDEState {
uint32_t mdata_size;
uint8_t *mdata_storage;
int media_changed;
- /* for pmac */
int is_read;
/* SMART */
uint8_t smart_enabled;
@@ -560,8 +559,7 @@ void ide_init2_with_non_qdev_drives(IDEB
void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
void ide_exec_cmd(IDEBus *bus, uint32_t val);
-void ide_read_dma_cb(void *opaque, int ret);
-void ide_write_dma_cb(void *opaque, int ret);
+void ide_dma_cb(void *opaque, int ret);
void ide_sector_write(IDEState *s);
void ide_sector_read(IDEState *s);
void ide_flush_cache(IDEState *s);
Index: qemu/hw/ide/pci.c
===================================================================
--- qemu.orig/hw/ide/pci.c 2010-12-17 11:42:03.440254508 +0100
+++ qemu/hw/ide/pci.c 2010-12-17 11:42:23.998252692 +0100
@@ -178,14 +178,9 @@ static void bmdma_restart_dma(BMDMAState
s->io_buffer_index = 0;
s->io_buffer_size = 0;
s->nsector = bm->nsector;
+ s->is_read = is_read;
bm->cur_addr = bm->addr;
-
- if (is_read) {
- bm->dma_cb = ide_read_dma_cb;
- } else {
- bm->dma_cb = ide_write_dma_cb;
- }
-
+ bm->dma_cb = ide_dma_cb;
bmdma_start_dma(&bm->dma, s, bm->dma_cb);
}
next reply other threads:[~2010-12-20 12:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 12:45 Christoph Hellwig [this message]
2010-12-20 12:45 ` [Qemu-devel] [PATCH 2/3] ide: also reset io_buffer_index for writes Christoph Hellwig
2010-12-20 12:46 ` [Qemu-devel] [PATCH 3/3] ide: kill ide_dma_submit_check Christoph Hellwig
2011-01-13 15:40 ` [Qemu-devel] [PATCH 1/3] ide: factor dma handling helpers Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101220124548.GA6395@lst.de \
--to=hch@lst.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.