From: Dmitri Belimov <d.belimov@gmail.com>
To: Jarod Wilson <jarod@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>,
Stefan Ringel <stefan.ringel@arcor.de>,
Felipe Sanches <juca@members.fsf.org>,
Bee Hock Goh <beehock@gmail.com>,
Luis Henrique Fagundes <lhfagundes@hacklab.com.br>,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: [PATCH] Rework and fix IR
Date: Wed, 22 Dec 2010 17:57:46 +0900 [thread overview]
Message-ID: <20101222175746.37ae077b@glory.local> (raw)
In-Reply-To: <20101221223645.GD29880@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 11366 bytes --]
Hi
This patch didn't kill Stefan's remotes and just for upload my good part of code.
1. Add some code for show IR activity
2. Add filter for IR remotes
3. Split remotes to different types.
4. Fix stop interrupt pipe when isoc pipe started.
When we decide general way of IR I'll add support our remotes.
For our customers I'll made custom temporary patch without this part.
diff --git a/drivers/staging/tm6000/TODO b/drivers/staging/tm6000/TODO
index 34780fc..135d0ea 100644
--- a/drivers/staging/tm6000/TODO
+++ b/drivers/staging/tm6000/TODO
@@ -1,4 +1,6 @@
There a few things to do before putting this driver in production:
+ - IR NEC with tm5600/6000 TV cards
+ - IR RC5 with tm5600/6000/6010 TV cards
- CodingStyle;
- Fix audio;
- Fix some panic/OOPS conditions.
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 1c9374a..2e525a6 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -328,6 +328,47 @@ struct usb_device_id tm6000_id_table[] = {
{ },
};
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+ /* Power LED unconfigured */
+ if (!dev->gpio.power_led)
+ return;
+
+ /* ON Power LED */
+ if (state) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ }
+ }
+ /* OFF Power LED */
+ else {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ }
+ }
+}
+
/* Tuner callback to provide the proper gpio changes needed for xc5000 */
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
{
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index e02ea67..21e7da4 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -37,6 +37,10 @@ static unsigned int enable_ir = 1;
module_param(enable_ir, int, 0644);
MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+/* number of 50ms for ON-OFF-ON power led */
+/* show IR activity */
+#define PWLED_OFF 2
+
#undef dprintk
#define dprintk(fmt, arg...) \
@@ -59,6 +63,9 @@ struct tm6000_IR {
struct delayed_work work;
u8 wait:1;
u8 key:1;
+ u8 pwled:1;
+ u8 pwledcnt;
+ u16 key_addr;
struct urb *int_urb;
u8 *urb_data;
@@ -89,26 +96,49 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
u8 buf[10];
int rc;
- /* hack */
- buf[0] = 0xff;
- buf[1] = 0xff;
- buf[2] = 0xf2;
- buf[3] = 0x2b;
- buf[4] = 0x20;
- buf[5] = 0x35;
- buf[6] = 0x60;
- buf[7] = 0x04;
- buf[8] = 0xc0;
- buf[9] = 0x08;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
- msleep(100);
-
- if (rc < 0) {
- printk(KERN_INFO "IR configuration failed");
- return rc;
+ switch (ir->rc_type) {
+ case RC_TYPE_NEC:
+ /* Setup IR decoder for NEC standard 12MHz system clock */
+ /* IR_LEADER_CNT = 0.9ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+ /* IR_PULSE_CNT = 0.7ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+ /* Remote WAKEUP = enable */
+ tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+ /* IR_WKUP_SEL = Low byte in decoded IR data */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+ /* IR_WKU_ADD code */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+ tm6000_flash_led(dev, 0);
+ msleep(100);
+ tm6000_flash_led(dev, 1);
+ break;
+ default:
+ /* hack */
+ buf[0] = 0xff;
+ buf[1] = 0xff;
+ buf[2] = 0xf2;
+ buf[3] = 0x2b;
+ buf[4] = 0x20;
+ buf[5] = 0x35;
+ buf[6] = 0x60;
+ buf[7] = 0x04;
+ buf[8] = 0xc0;
+ buf[9] = 0x08;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+ msleep(100);
+
+ if (rc < 0) {
+ printk(KERN_INFO "IR configuration failed");
+ return rc;
+ }
+ break;
}
+
return 0;
}
@@ -143,10 +173,21 @@ static int default_polling_getkey(struct tm6000_IR *ir,
return 0;
if (&dev->int_in) {
- if (ir->rc_type == RC_TYPE_RC5)
+ switch (ir->rc_type) {
+ case RC_TYPE_RC5:
poll_result->rc_data = ir->urb_data[0];
- else
- poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
+ break;
+ case RC_TYPE_NEC:
+ if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ }
+ break;
+ default:
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ break;
+ }
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
@@ -186,6 +227,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
static void tm6000_ir_handle_key(struct tm6000_IR *ir)
{
+ struct tm6000_core *dev = ir->dev;
int result;
struct tm6000_ir_poll_result poll_result;
@@ -198,9 +240,21 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
+ if (ir->pwled) {
+ if (ir->pwledcnt >= PWLED_OFF) {
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 1);
+ } else
+ ir->pwledcnt += 1;
+ }
+
if (ir->key) {
rc_keydown(ir->rc, poll_result.rc_data, 0);
ir->key = 0;
+ ir->pwled = 1;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 0);
}
return;
}
@@ -234,19 +288,80 @@ int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
{
struct tm6000_IR *ir = rc->priv;
+ if (!ir)
+ return 0;
+
+ if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+ ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
ir->get_key = default_polling_getkey;
+ ir->rc_type = rc_type;
tm6000_ir_config(ir);
/* TODO */
return 0;
}
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+ int pipe, size;
+ int err = -ENOMEM;
+
+
+ if (!ir)
+ return -ENODEV;
+
+ ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+ pipe = usb_rcvintpipe(dev->udev,
+ dev->int_in.endp->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+ dprintk("IR max size: %d\n", size);
+
+ ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+ if (ir->int_urb->transfer_buffer == NULL) {
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+ usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+ ir->int_urb->transfer_buffer, size,
+ tm6000_ir_urb_received, dev,
+ dev->int_in.endp->desc.bInterval);
+ err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+ if (err) {
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+ return 0;
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ if (!ir)
+ return;
+
+ usb_kill_urb(ir->int_urb);
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ ir->int_urb = NULL;
+ kfree(ir->urb_data);
+ ir->urb_data = NULL;
+}
+
int tm6000_ir_init(struct tm6000_core *dev)
{
struct tm6000_IR *ir;
struct rc_dev *rc;
int err = -ENOMEM;
- int pipe, size;
if (!enable_ir)
return -ENODEV;
@@ -276,6 +391,9 @@ int tm6000_ir_init(struct tm6000_core *dev)
rc->driver_type = RC_DRIVER_SCANCODE;
ir->polling = 50;
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+
snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
dev->name);
@@ -298,32 +416,10 @@ int tm6000_ir_init(struct tm6000_core *dev)
if (&dev->int_in) {
dprintk("IR over int\n");
- ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-
- pipe = usb_rcvintpipe(dev->udev,
- dev->int_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
+ err = tm6000_ir_int_start(dev);
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
- dprintk("IR max size: %d\n", size);
-
- ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (ir->int_urb->transfer_buffer == NULL) {
- usb_free_urb(ir->int_urb);
- goto out;
- }
- dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
- usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
- ir->int_urb->transfer_buffer, size,
- tm6000_ir_urb_received, dev,
- dev->int_in.endp->desc.bInterval);
- err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
- if (err) {
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
+ if (err)
goto out;
- }
- ir->urb_data = kzalloc(size, GFP_KERNEL);
}
/* ir register */
@@ -352,12 +448,7 @@ int tm6000_ir_fini(struct tm6000_core *dev)
rc_unregister_device(ir->rc);
if (ir->int_urb) {
- usb_kill_urb(ir->int_urb);
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- ir->int_urb = NULL;
- kfree(ir->urb_data);
- ir->urb_data = NULL;
+ tm6000_ir_int_stop(dev);
}
kfree(ir);
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index c5690b2..b06701b 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -545,11 +545,16 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
/* De-allocates all pending stuff */
tm6000_uninit_isoc(dev);
+ /* Stop interrupt USB pipe */
+ tm6000_ir_int_stop(dev);
usb_set_interface(dev->udev,
dev->isoc_in.bInterfaceNumber,
dev->isoc_in.bAlternateSetting);
+ /* Start interrupt USB pipe */
+ tm6000_ir_int_start(dev);
+
pipe = usb_rcvisocpipe(dev->udev,
dev->isoc_in.endp->desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK);
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 46017b6..bf11eee 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -266,6 +266,7 @@ struct tm6000_fh {
int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
/* In tm6000-core.c */
@@ -332,6 +333,8 @@ int tm6000_queue_init(struct tm6000_core *dev);
int tm6000_ir_init(struct tm6000_core *dev);
int tm6000_ir_fini(struct tm6000_core *dev);
void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
/* Debug stuff */
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
With my best regards, Dmitry.
[-- Attachment #2: tm6000_ir.patch --]
[-- Type: text/x-patch, Size: 10959 bytes --]
diff --git a/drivers/staging/tm6000/TODO b/drivers/staging/tm6000/TODO
index 34780fc..135d0ea 100644
--- a/drivers/staging/tm6000/TODO
+++ b/drivers/staging/tm6000/TODO
@@ -1,4 +1,6 @@
There a few things to do before putting this driver in production:
+ - IR NEC with tm5600/6000 TV cards
+ - IR RC5 with tm5600/6000/6010 TV cards
- CodingStyle;
- Fix audio;
- Fix some panic/OOPS conditions.
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 1c9374a..2e525a6 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -328,6 +328,47 @@ struct usb_device_id tm6000_id_table[] = {
{ },
};
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+ /* Power LED unconfigured */
+ if (!dev->gpio.power_led)
+ return;
+
+ /* ON Power LED */
+ if (state) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ }
+ }
+ /* OFF Power LED */
+ else {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ }
+ }
+}
+
/* Tuner callback to provide the proper gpio changes needed for xc5000 */
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
{
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index e02ea67..21e7da4 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -37,6 +37,10 @@ static unsigned int enable_ir = 1;
module_param(enable_ir, int, 0644);
MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+/* number of 50ms for ON-OFF-ON power led */
+/* show IR activity */
+#define PWLED_OFF 2
+
#undef dprintk
#define dprintk(fmt, arg...) \
@@ -59,6 +63,9 @@ struct tm6000_IR {
struct delayed_work work;
u8 wait:1;
u8 key:1;
+ u8 pwled:1;
+ u8 pwledcnt;
+ u16 key_addr;
struct urb *int_urb;
u8 *urb_data;
@@ -89,26 +96,49 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
u8 buf[10];
int rc;
- /* hack */
- buf[0] = 0xff;
- buf[1] = 0xff;
- buf[2] = 0xf2;
- buf[3] = 0x2b;
- buf[4] = 0x20;
- buf[5] = 0x35;
- buf[6] = 0x60;
- buf[7] = 0x04;
- buf[8] = 0xc0;
- buf[9] = 0x08;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
- msleep(100);
-
- if (rc < 0) {
- printk(KERN_INFO "IR configuration failed");
- return rc;
+ switch (ir->rc_type) {
+ case RC_TYPE_NEC:
+ /* Setup IR decoder for NEC standard 12MHz system clock */
+ /* IR_LEADER_CNT = 0.9ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+ /* IR_PULSE_CNT = 0.7ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+ /* Remote WAKEUP = enable */
+ tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+ /* IR_WKUP_SEL = Low byte in decoded IR data */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+ /* IR_WKU_ADD code */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+ tm6000_flash_led(dev, 0);
+ msleep(100);
+ tm6000_flash_led(dev, 1);
+ break;
+ default:
+ /* hack */
+ buf[0] = 0xff;
+ buf[1] = 0xff;
+ buf[2] = 0xf2;
+ buf[3] = 0x2b;
+ buf[4] = 0x20;
+ buf[5] = 0x35;
+ buf[6] = 0x60;
+ buf[7] = 0x04;
+ buf[8] = 0xc0;
+ buf[9] = 0x08;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+ msleep(100);
+
+ if (rc < 0) {
+ printk(KERN_INFO "IR configuration failed");
+ return rc;
+ }
+ break;
}
+
return 0;
}
@@ -143,10 +173,21 @@ static int default_polling_getkey(struct tm6000_IR *ir,
return 0;
if (&dev->int_in) {
- if (ir->rc_type == RC_TYPE_RC5)
+ switch (ir->rc_type) {
+ case RC_TYPE_RC5:
poll_result->rc_data = ir->urb_data[0];
- else
- poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
+ break;
+ case RC_TYPE_NEC:
+ if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ }
+ break;
+ default:
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ break;
+ }
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
@@ -186,6 +227,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
static void tm6000_ir_handle_key(struct tm6000_IR *ir)
{
+ struct tm6000_core *dev = ir->dev;
int result;
struct tm6000_ir_poll_result poll_result;
@@ -198,9 +240,21 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
+ if (ir->pwled) {
+ if (ir->pwledcnt >= PWLED_OFF) {
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 1);
+ } else
+ ir->pwledcnt += 1;
+ }
+
if (ir->key) {
rc_keydown(ir->rc, poll_result.rc_data, 0);
ir->key = 0;
+ ir->pwled = 1;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 0);
}
return;
}
@@ -234,19 +288,80 @@ int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
{
struct tm6000_IR *ir = rc->priv;
+ if (!ir)
+ return 0;
+
+ if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+ ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
ir->get_key = default_polling_getkey;
+ ir->rc_type = rc_type;
tm6000_ir_config(ir);
/* TODO */
return 0;
}
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+ int pipe, size;
+ int err = -ENOMEM;
+
+
+ if (!ir)
+ return -ENODEV;
+
+ ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+ pipe = usb_rcvintpipe(dev->udev,
+ dev->int_in.endp->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+ dprintk("IR max size: %d\n", size);
+
+ ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+ if (ir->int_urb->transfer_buffer == NULL) {
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+ usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+ ir->int_urb->transfer_buffer, size,
+ tm6000_ir_urb_received, dev,
+ dev->int_in.endp->desc.bInterval);
+ err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+ if (err) {
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+ return 0;
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ if (!ir)
+ return;
+
+ usb_kill_urb(ir->int_urb);
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ ir->int_urb = NULL;
+ kfree(ir->urb_data);
+ ir->urb_data = NULL;
+}
+
int tm6000_ir_init(struct tm6000_core *dev)
{
struct tm6000_IR *ir;
struct rc_dev *rc;
int err = -ENOMEM;
- int pipe, size;
if (!enable_ir)
return -ENODEV;
@@ -276,6 +391,9 @@ int tm6000_ir_init(struct tm6000_core *dev)
rc->driver_type = RC_DRIVER_SCANCODE;
ir->polling = 50;
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+
snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
dev->name);
@@ -298,32 +416,10 @@ int tm6000_ir_init(struct tm6000_core *dev)
if (&dev->int_in) {
dprintk("IR over int\n");
- ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-
- pipe = usb_rcvintpipe(dev->udev,
- dev->int_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
+ err = tm6000_ir_int_start(dev);
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
- dprintk("IR max size: %d\n", size);
-
- ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (ir->int_urb->transfer_buffer == NULL) {
- usb_free_urb(ir->int_urb);
- goto out;
- }
- dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
- usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
- ir->int_urb->transfer_buffer, size,
- tm6000_ir_urb_received, dev,
- dev->int_in.endp->desc.bInterval);
- err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
- if (err) {
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
+ if (err)
goto out;
- }
- ir->urb_data = kzalloc(size, GFP_KERNEL);
}
/* ir register */
@@ -352,12 +448,7 @@ int tm6000_ir_fini(struct tm6000_core *dev)
rc_unregister_device(ir->rc);
if (ir->int_urb) {
- usb_kill_urb(ir->int_urb);
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- ir->int_urb = NULL;
- kfree(ir->urb_data);
- ir->urb_data = NULL;
+ tm6000_ir_int_stop(dev);
}
kfree(ir);
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index c5690b2..b06701b 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -545,11 +545,16 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
/* De-allocates all pending stuff */
tm6000_uninit_isoc(dev);
+ /* Stop interrupt USB pipe */
+ tm6000_ir_int_stop(dev);
usb_set_interface(dev->udev,
dev->isoc_in.bInterfaceNumber,
dev->isoc_in.bAlternateSetting);
+ /* Start interrupt USB pipe */
+ tm6000_ir_int_start(dev);
+
pipe = usb_rcvisocpipe(dev->udev,
dev->isoc_in.endp->desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK);
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 46017b6..bf11eee 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -266,6 +266,7 @@ struct tm6000_fh {
int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
/* In tm6000-core.c */
@@ -332,6 +333,8 @@ int tm6000_queue_init(struct tm6000_core *dev);
int tm6000_ir_init(struct tm6000_core *dev);
int tm6000_ir_fini(struct tm6000_core *dev);
void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
/* Debug stuff */
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
next prev parent reply other threads:[~2010-12-22 8:57 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-07 5:28 [RFC PATCH] Audio standards on tm6000 Mauro Carvalho Chehab
2010-10-08 19:03 ` Dmitri Belimov
2010-10-08 11:52 ` Mauro Carvalho Chehab
2010-10-12 18:28 ` Dmitri Belimov
2010-10-12 16:54 ` Stefan Ringel
2010-10-13 14:13 ` Dmitri Belimov
[not found] ` <20101129174412.08f2001c@glory.local>
[not found] ` <4CF51C9E.6040600@arcor.de>
[not found] ` <20101201144704.43b58f2c@glory.local>
[not found] ` <4CF67AB9.6020006@arcor.de>
[not found] ` <20101202134128.615bbfa0@glory.local>
[not found] ` <4CF71CF6.7080603@redhat.com>
[not found] ` <20101206010934.55d07569@glory.local>
[not found] ` <4CFBF62D.7010301@arcor.de>
[not found] ` <20101206190230.2259d7ab@glory.local>
[not found] ` <4CFEA3D2.4050309@arcor.de>
[not found] ` <20101208125539.739e2ed2@glory.local>
[not found] ` <4CFFAD1E.7040004@arcor.de>
2010-12-14 3:23 ` tm6000 and IR Dmitri Belimov
2010-12-14 16:27 ` Stefan Ringel
2010-12-15 7:46 ` Dmitri Belimov
2010-12-15 15:52 ` Stefan Ringel
2010-12-16 3:26 ` Dmitri Belimov
2010-12-16 9:38 ` Dmitri Belimov
2010-12-16 17:12 ` Stefan Ringel
2010-12-17 1:46 ` Dmitri Belimov
2010-12-17 5:18 ` Stefan Ringel
2010-12-17 7:08 ` Dmitri Belimov
2010-12-18 0:24 ` Mauro Carvalho Chehab
2010-12-18 13:56 ` Andy Walls
2010-12-18 15:55 ` Stefan Ringel
2010-12-20 5:41 ` Dmitri Belimov
2010-12-21 22:36 ` Jarod Wilson
2010-12-22 8:57 ` Dmitri Belimov [this message]
2011-01-13 3:46 ` [PATCH] tm6000: rework init code Dmitri Belimov
2011-01-20 6:05 ` [PATCH] tm6000: add/rework reg.defines Dmitri Belimov
2011-01-20 19:25 ` Stefan Ringel
2011-01-20 23:20 ` Dmitri Belimov
2011-02-17 5:12 ` tm6000 and radio Dmitri Belimov
2011-02-17 20:58 ` Mauro Carvalho Chehab
2011-02-18 1:11 ` [PATCH] tm6000: add radio Dmitri Belimov
2011-03-01 4:55 ` [PATCH] tm6000: add audio conf for new cards Dmitri Belimov
2011-03-18 0:08 ` [PATCH] tm6000: fix s-video input Dmitri Belimov
2011-03-19 6:46 ` Stefan Ringel
2011-03-23 2:49 ` Dmitri Belimov
2011-04-19 5:29 ` [PATCH v1] tm6000: rework standards Dmitri Belimov
2011-04-19 6:42 ` Stefan Ringel
2011-05-04 16:18 ` Stefan Ringel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101222175746.37ae077b@glory.local \
--to=d.belimov@gmail.com \
--cc=beehock@gmail.com \
--cc=jarod@redhat.com \
--cc=juca@members.fsf.org \
--cc=lhfagundes@hacklab.com.br \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=stefan.ringel@arcor.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.