[PATCH 09/10] ARM: mx28: read fec mac address from ocotp

[shawn.guo@freescale.com (Shawn Guo)]

Hi Uwe,

On Wed, Dec 29, 2010 at 11:53:28AM +0100, Uwe Kleine-K?nig wrote:
> Hello Shawn,
> 
> On Tue, Dec 28, 2010 at 10:55:54PM +0800, Shawn Guo wrote:
> > Read fec mac address from ocotp and save it into fec_platform_data
> > mac field for fec driver to use.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
> > ---
> >  arch/arm/mach-mxs/devices/platform-fec.c        |    2 +-
> >  arch/arm/mach-mxs/include/mach/devices-common.h |    2 +-
> >  arch/arm/mach-mxs/mach-mx28evk.c                |   31 +++++++++++++++++++++++
> >  3 files changed, 33 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
> > index c08168c..dc978ee 100644
> > --- a/arch/arm/mach-mxs/devices/platform-fec.c
> > +++ b/arch/arm/mach-mxs/devices/platform-fec.c
> > @@ -31,7 +31,7 @@ const struct mxs_fec_data mx28_fec_data[] __initconst = {
> >  
> >  struct platform_device *__init mxs_add_fec(
> >  		const struct mxs_fec_data *data,
> > -		const struct fec_platform_data *pdata)
> > +		struct fec_platform_data *pdata)
> >  {
> >  	struct resource res[] = {
> >  		{
> > diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
> > index fca0551..d206e0a 100644
> > --- a/arch/arm/mach-mxs/include/mach/devices-common.h
> > +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
> > @@ -38,4 +38,4 @@ struct mxs_fec_data {
> >  };
> >  struct platform_device *__init mxs_add_fec(
> >  		const struct mxs_fec_data *data,
> > -		const struct fec_platform_data *pdata);
> > +		struct fec_platform_data *pdata);
> Why that?
> 
pdata->mac needs to get assigned by ocotp read function.

> > diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
> > index def6519..d133733 100644
> > --- a/arch/arm/mach-mxs/mach-mx28evk.c
> > +++ b/arch/arm/mach-mxs/mach-mx28evk.c
> > @@ -129,6 +129,36 @@ static struct fec_platform_data mx28_fec_pdata[] = {
> >  	},
> >  };
> >  
> > +static int __init mx28evk_fec_get_mac(void)
> > +{
> > +	int i, ret;
> > +	u32 val;
> > +
> > +	/*
> > +	 * OCOTP only stores the last 4 octets for each mac address,
> > +	 * so hard-coding the first two octets as Freescale OUI (00:04:9f)
> > +	 * is needed.
> > +	 */
> > +	for (i = 0; i < 2; i++) {
> > +		ret = mxs_read_ocotp(0x20 + i * 0x10, 1, &val);
> > +		if (ret)
> > +			goto error;
> > +
> > +		mx28_fec_pdata[i].mac[0] = 0x00;
> > +		mx28_fec_pdata[i].mac[1] = 0x04;
> > +		mx28_fec_pdata[i].mac[2] = (val >> 24) & 0xff;
> > +		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
> > +		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
> > +		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
> > +	}
> > +
> > +	return 0;
> > +
> > +error:
> > +	pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
> > +	return -ETIMEDOUT;
> return ret please.
> 
OK.

> > +}
> I think this should be defined in a more generic place.
> 
Necessary?

> > +
> >  static void __init mx28evk_init(void)
> >  {
> >  	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
> > @@ -136,6 +166,7 @@ static void __init mx28evk_init(void)
> >  	mx28_add_duart();
> >  
> >  	mx28evk_fec_reset();
> > +	mx28evk_fec_get_mac();
> You ignore the return value here.  Intended?
> 
Not intended.  Will check and give a warning.

> >  	mx28_add_fec(0, &mx28_fec_pdata[0]);
> >  #ifdef CONFIG_FEC2
> >  	mx28_add_fec(1, &mx28_fec_pdata[1]);
> > -- 
> > 1.7.1
> > 
> > 
> > 
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-K?nig            |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> 

-- 
Regards,
Shawn