From: "Kashyap, Desai" <kashyap.desai@lsi.com>
To: linux-scsi@vger.kernel.org
Cc: James.Bottomley@HansenPartnership.com, Eric.Moore@lsi.com,
Sathya.Prakash@lsi.com
Subject: [PATCH 02/10] mpt2sas: Internal device reset complete event is not supported for older firmware prior to MPI Rev K
Date: Tue, 4 Jan 2011 11:34:17 +0530 [thread overview]
Message-ID: <20110104060407.GC5751@lsi.com> (raw)
The "internal device reset complete" event is not supported
for older firmware prior to MPI Rev K We added
a check in the driver so the "internal device reset" event is
ignored for older firmware. When ignored, the tm_busy flag doesn't
get set nor cleared. Without this fix, IO queues would be froozen
indefinetly after the "internal device reset" event, as the "complete" event
never sent to clear the flag.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 95d8274..a16f2a0 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -5002,6 +5002,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
event_data);
#endif
+ /* In MPI Revision K (0xC), the internal device reset complete was
+ * implemented, so avoid setting tm_busy flag for older firmware.
+ */
+ if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+ return;
+
if (event_data->ReasonCode !=
MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
event_data->ReasonCode !=
reply other threads:[~2011-01-04 6:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110104060407.GC5751@lsi.com \
--to=kashyap.desai@lsi.com \
--cc=Eric.Moore@lsi.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=Sathya.Prakash@lsi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.