From: Ingo Molnar <mingo@elte.hu>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] x86/apic changes for v2.6.38
Date: Thu, 6 Jan 2011 10:44:23 +0100 [thread overview]
Message-ID: <20110106094423.GA17565@elte.hu> (raw)
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-apic-for-linus
out-of-topic modifications in x86-apic-for-linus:
-------------------------------------------------
drivers/acpi/numa.c # d3bd058: x86, acpi: Parse all SRAT cpu ent
Thanks,
Ingo
------------------>
Sebastian Andrzej Siewior (1):
x86: io_apic: Split setup_ioapic_ids_from_mpc()
Thomas Gleixner (3):
x86: Allow platforms to force enable apic
x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
Yinghai Lu (3):
x86, acpi: Add MAX_LOCAL_APIC for 32bit
x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
arch/x86/include/asm/apic.h | 1 +
arch/x86/include/asm/apicdef.h | 1 +
arch/x86/include/asm/io_apic.h | 8 +--
arch/x86/include/asm/mpspec.h | 31 ++++-------
arch/x86/include/asm/mpspec_def.h | 7 ---
arch/x86/kernel/acpi/boot.c | 11 +++-
arch/x86/kernel/apic/apic.c | 89 ++++++++++++++++++++------------
arch/x86/kernel/apic/io_apic.c | 37 ++++++++-----
arch/x86/kernel/setup.c | 5 +--
arch/x86/mm/srat_32.c | 1 +
arch/x86/mm/srat_64.c | 10 ++++
arch/x86/platform/sfi/sfi.c | 4 +-
arch/x86/platform/visws/visws_quirks.c | 2 +-
drivers/acpi/numa.c | 14 ++++-
14 files changed, 129 insertions(+), 92 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f6ce0bd..cf12007 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -238,6 +238,7 @@ extern void setup_boot_APIC_clock(void);
extern void setup_secondary_APIC_clock(void);
extern int APIC_init_uniprocessor(void);
extern void enable_NMI_through_LVT0(void);
+extern int apic_force_enable(void);
/*
* On 32bit this is mach-xxx local
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index a859ca4..47a30ff 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -145,6 +145,7 @@
#ifdef CONFIG_X86_32
# define MAX_IO_APICS 64
+# define MAX_LOCAL_APIC 256
#else
# define MAX_IO_APICS 128
# define MAX_LOCAL_APIC 32768
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index a6b28d0..0c5ca4e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -159,7 +159,7 @@ struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
void setup_IO_APIC_irq_extra(u32 gsi);
-extern void ioapic_init_mappings(void);
+extern void ioapic_and_gsi_init(void);
extern void ioapic_insert_resources(void);
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
@@ -168,10 +168,9 @@ extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
-extern void probe_nr_irqs_gsi(void);
extern int get_nr_irqs_gsi(void);
-
extern void setup_ioapic_ids_from_mpc(void);
+extern void setup_ioapic_ids_from_mpc_nocheck(void);
struct mp_ioapic_gsi{
u32 gsi_base;
@@ -189,9 +188,8 @@ extern void __init pre_init_apic_IRQ0(void);
#define io_apic_assign_pci_irqs 0
#define setup_ioapic_ids_from_mpc x86_init_noop
static const int timer_through_8259 = 0;
-static inline void ioapic_init_mappings(void) { }
+static inline void ioapic_and_gsi_init(void) { }
static inline void ioapic_insert_resources(void) { }
-static inline void probe_nr_irqs_gsi(void) { }
#define gsi_top (NR_IRQS_LEGACY)
static inline int mp_find_ioapic(u32 gsi) { return 0; }
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index c82868e..0c90dd9 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -5,8 +5,9 @@
#include <asm/mpspec_def.h>
#include <asm/x86_init.h>
+#include <asm/apicdef.h>
-extern int apic_version[MAX_APICS];
+extern int apic_version[];
extern int pic_mode;
#ifdef CONFIG_X86_32
@@ -107,7 +108,7 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
int active_high_low);
#endif /* CONFIG_ACPI */
-#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS)
+#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_LOCAL_APIC)
struct physid_mask {
unsigned long mask[PHYSID_ARRAY_SIZE];
@@ -122,31 +123,31 @@ typedef struct physid_mask physid_mask_t;
test_and_set_bit(physid, (map).mask)
#define physids_and(dst, src1, src2) \
- bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+ bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
#define physids_or(dst, src1, src2) \
- bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+ bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
#define physids_clear(map) \
- bitmap_zero((map).mask, MAX_APICS)
+ bitmap_zero((map).mask, MAX_LOCAL_APIC)
#define physids_complement(dst, src) \
- bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+ bitmap_complement((dst).mask, (src).mask, MAX_LOCAL_APIC)
#define physids_empty(map) \
- bitmap_empty((map).mask, MAX_APICS)
+ bitmap_empty((map).mask, MAX_LOCAL_APIC)
#define physids_equal(map1, map2) \
- bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+ bitmap_equal((map1).mask, (map2).mask, MAX_LOCAL_APIC)
#define physids_weight(map) \
- bitmap_weight((map).mask, MAX_APICS)
+ bitmap_weight((map).mask, MAX_LOCAL_APIC)
#define physids_shift_right(d, s, n) \
- bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+ bitmap_shift_right((d).mask, (s).mask, n, MAX_LOCAL_APIC)
#define physids_shift_left(d, s, n) \
- bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+ bitmap_shift_left((d).mask, (s).mask, n, MAX_LOCAL_APIC)
static inline unsigned long physids_coerce(physid_mask_t *map)
{
@@ -159,14 +160,6 @@ static inline void physids_promote(unsigned long physids, physid_mask_t *map)
map->mask[0] = physids;
}
-/* Note: will create very large stack frames if physid_mask_t is big */
-#define physid_mask_of_physid(physid) \
- ({ \
- physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
- physid_set(physid, __physid_mask); \
- __physid_mask; \
- })
-
static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
{
physids_clear(*map);
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index 4a7f96d..c0a955a 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -15,13 +15,6 @@
#ifdef CONFIG_X86_32
# define MAX_MPC_ENTRY 1024
-# define MAX_APICS 256
-#else
-# if NR_CPUS <= 255
-# define MAX_APICS 255
-# else
-# define MAX_APICS 32768
-# endif
#endif
/* Intel MP Floating Pointer Structure */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 71232b9..17c8090 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -198,6 +198,11 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
{
unsigned int ver = 0;
+ if (id >= (MAX_LOCAL_APIC-1)) {
+ printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
+ return;
+ }
+
if (!enabled) {
++disabled_cpus;
return;
@@ -910,13 +915,13 @@ static int __init acpi_parse_madt_lapic_entries(void)
acpi_register_lapic_address(acpi_lapic_addr);
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
- acpi_parse_sapic, MAX_APICS);
+ acpi_parse_sapic, MAX_LOCAL_APIC);
if (!count) {
x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
- acpi_parse_x2apic, MAX_APICS);
+ acpi_parse_x2apic, MAX_LOCAL_APIC);
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
- acpi_parse_lapic, MAX_APICS);
+ acpi_parse_lapic, MAX_LOCAL_APIC);
}
if (!count && !x2count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 7821813..30fdce8 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1538,13 +1538,60 @@ static int __init detect_init_APIC(void)
return 0;
}
#else
+
+static int apic_verify(void)
+{
+ u32 features, h, l;
+
+ /*
+ * The APIC feature bit should now be enabled
+ * in `cpuid'
+ */
+ features = cpuid_edx(1);
+ if (!(features & (1 << X86_FEATURE_APIC))) {
+ pr_warning("Could not enable APIC!\n");
+ return -1;
+ }
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /* The BIOS may have set up the APIC at some other address */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (l & MSR_IA32_APICBASE_ENABLE)
+ mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+ pr_info("Found and enabled local APIC!\n");
+ return 0;
+}
+
+int apic_force_enable(void)
+{
+ u32 h, l;
+
+ if (disable_apic)
+ return -1;
+
+ /*
+ * Some BIOSes disable the local APIC in the APIC_BASE
+ * MSR. This can only be done in software for Intel P6 or later
+ * and AMD K7 (Model > 1) or later.
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+ pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ enabled_via_apicbase = 1;
+ }
+ return apic_verify();
+}
+
/*
* Detect and initialize APIC
*/
static int __init detect_init_APIC(void)
{
- u32 h, l, features;
-
/* Disabled by kernel option? */
if (disable_apic)
return -1;
@@ -1574,38 +1621,12 @@ static int __init detect_init_APIC(void)
"you can enable it with \"lapic\"\n");
return -1;
}
- /*
- * Some BIOSes disable the local APIC in the APIC_BASE
- * MSR. This can only be done in software for Intel P6 or later
- * and AMD K7 (Model > 1) or later.
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (!(l & MSR_IA32_APICBASE_ENABLE)) {
- pr_info("Local APIC disabled by BIOS -- reenabling.\n");
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
- wrmsr(MSR_IA32_APICBASE, l, h);
- enabled_via_apicbase = 1;
- }
- }
- /*
- * The APIC feature bit should now be enabled
- * in `cpuid'
- */
- features = cpuid_edx(1);
- if (!(features & (1 << X86_FEATURE_APIC))) {
- pr_warning("Could not enable APIC!\n");
- return -1;
+ if (apic_force_enable())
+ return -1;
+ } else {
+ if (apic_verify())
+ return -1;
}
- set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /* The BIOS may have set up the APIC at some other address */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (l & MSR_IA32_APICBASE_ENABLE)
- mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
- pr_info("Found and enabled local APIC!\n");
apic_pm_activate();
@@ -1693,7 +1714,7 @@ void __init init_apic_mappings(void)
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
-int apic_version[MAX_APICS];
+int apic_version[MAX_LOCAL_APIC];
int __init APIC_init_uniprocessor(void)
{
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index fadcd74..2fc696e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1934,8 +1934,7 @@ void disable_IO_APIC(void)
*
* by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
*/
-
-void __init setup_ioapic_ids_from_mpc(void)
+void __init setup_ioapic_ids_from_mpc_nocheck(void)
{
union IO_APIC_reg_00 reg_00;
physid_mask_t phys_id_present_map;
@@ -1944,15 +1943,6 @@ void __init setup_ioapic_ids_from_mpc(void)
unsigned char old_id;
unsigned long flags;
- if (acpi_ioapic)
- return;
- /*
- * Don't check I/O APIC IDs for xAPIC systems. They have
- * no meaning without the serial APIC bus.
- */
- if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return;
/*
* This is broken; anything with a real cpu count has to
* circumvent this idiocy regardless.
@@ -2006,7 +1996,6 @@ void __init setup_ioapic_ids_from_mpc(void)
physids_or(phys_id_present_map, phys_id_present_map, tmp);
}
-
/*
* We need to adjust the IRQ routing table
* if the ID changed.
@@ -2042,6 +2031,21 @@ void __init setup_ioapic_ids_from_mpc(void)
apic_printk(APIC_VERBOSE, " ok.\n");
}
}
+
+void __init setup_ioapic_ids_from_mpc(void)
+{
+
+ if (acpi_ioapic)
+ return;
+ /*
+ * Don't check I/O APIC IDs for xAPIC systems. They have
+ * no meaning without the serial APIC bus.
+ */
+ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return;
+ setup_ioapic_ids_from_mpc_nocheck();
+}
#endif
int no_timer_check __initdata;
@@ -3639,7 +3643,7 @@ int __init io_apic_get_redir_entries (int ioapic)
return reg_01.bits.entries + 1;
}
-void __init probe_nr_irqs_gsi(void)
+static void __init probe_nr_irqs_gsi(void)
{
int nr;
@@ -3956,7 +3960,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics)
return res;
}
-void __init ioapic_init_mappings(void)
+void __init ioapic_and_gsi_init(void)
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
struct resource *ioapic_res;
@@ -3994,6 +3998,8 @@ fake_ioapic_page:
ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
ioapic_res++;
}
+
+ probe_nr_irqs_gsi();
}
void __init ioapic_insert_resources(void)
@@ -4103,7 +4109,8 @@ void __init pre_init_apic_IRQ0(void)
printk(KERN_INFO "Early APIC setup for system timer0\n");
#ifndef CONFIG_SMP
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+ physid_set_mask_of_physid(boot_cpu_physical_apicid,
+ &phys_cpu_present_map);
#endif
/* Make sure the irq descriptor is set up */
cfg = alloc_irq_and_cfg_at(0, 0);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a0f52af..a25ce88 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1045,10 +1045,7 @@ void __init setup_arch(char **cmdline_p)
#endif
init_apic_mappings();
- ioapic_init_mappings();
-
- /* need to wait for io_apic is mapped */
- probe_nr_irqs_gsi();
+ ioapic_and_gsi_init();
kvm_guest_init();
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index a17dffd..f164345 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -92,6 +92,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
/* mark this node as "seen" in node bitmap */
BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
+ /* don't need to check apic_id here, because it is always 8 bits */
apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index a35cb9d..171a0aa 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -134,6 +134,10 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
}
apic_id = pa->apic_id;
+ if (apic_id >= MAX_LOCAL_APIC) {
+ printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+ return;
+ }
apicid_to_node[apic_id] = node;
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
@@ -168,6 +172,12 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
else
apic_id = pa->apic_id;
+
+ if (apic_id >= MAX_LOCAL_APIC) {
+ printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+ return;
+ }
+
apicid_to_node[apic_id] = node;
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index dd4c281..ca54875 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -48,9 +48,9 @@ static void __init mp_sfi_register_lapic_address(unsigned long address)
/* All CPUs enumerated by SFI must be present and enabled */
static void __cpuinit mp_sfi_register_lapic(u8 id)
{
- if (MAX_APICS - id <= 0) {
+ if (MAX_LOCAL_APIC - id <= 0) {
pr_warning("Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
+ id, MAX_LOCAL_APIC);
return;
}
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
index 3371bd0..6320376 100644
--- a/arch/x86/platform/visws/visws_quirks.c
+++ b/arch/x86/platform/visws/visws_quirks.c
@@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
ver = m->apicver;
if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->apicid, MAX_APICS);
+ m->apicid, MAX_LOCAL_APIC);
return;
}
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 5718566..d9926af 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -275,13 +275,23 @@ acpi_table_parse_srat(enum acpi_srat_type id,
int __init acpi_numa_init(void)
{
int ret = 0;
+ int nr_cpu_entries = nr_cpu_ids;
+
+#ifdef CONFIG_X86
+ /*
+ * Should not limit number with cpu num that is from NR_CPUS or nr_cpus=
+ * SRAT cpu entries could have different order with that in MADT.
+ * So go over all cpu entries in SRAT to get apicid to node mapping.
+ */
+ nr_cpu_entries = MAX_LOCAL_APIC;
+#endif
/* SRAT: Static Resource Affinity Table */
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
- acpi_parse_x2apic_affinity, nr_cpu_ids);
+ acpi_parse_x2apic_affinity, nr_cpu_entries);
acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
- acpi_parse_processor_affinity, nr_cpu_ids);
+ acpi_parse_processor_affinity, nr_cpu_entries);
ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
acpi_parse_memory_affinity,
NR_NODE_MEMBLKS);
next reply other threads:[~2011-01-06 9:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 9:44 Ingo Molnar [this message]
2011-01-06 18:55 ` [GIT PULL] x86/apic changes for v2.6.38 Linus Torvalds
2011-01-06 19:22 ` H. Peter Anvin
2011-01-06 19:57 ` Tony Luck
2011-01-06 22:27 ` Tony Luck
2011-01-06 23:48 ` Luck, Tony
2011-01-06 23:53 ` Linus Torvalds
2011-01-07 0:17 ` Yinghai Lu
2011-01-07 0:32 ` Tony Luck
2011-01-07 1:21 ` Randy Dunlap
2011-01-07 1:48 ` Yinghai Lu
2011-01-11 18:36 ` Tony Luck
2011-01-12 8:28 ` Ingo Molnar
2011-01-12 8:50 ` Yinghai Lu
2011-01-12 11:36 ` [tip:x86/urgent] x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c tip-bot for Tony Luck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110106094423.GA17565@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.