From mboxrd@z Thu Jan 1 00:00:00 1970 From: Magnus Damm Date: Thu, 06 Jan 2011 11:12:27 +0000 Subject: [PATCH] sh: sh7366 Enable SDIO IRQs Message-Id: <20110106111227.9476.81497.sendpatchset@t400s> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org From: Magnus Damm This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7366 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: Magnus Damm --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) --- 0011/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ work/arch/sh/kernel/cpu/sh4a/setup-sh7366.c 2011-01-06 20:07:10.000000000 +0900 @@ -324,6 +324,8 @@ void __init sh7366_mem_init(void) enum { UNUSED=0, + ENABLED, + DISABLED, /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, @@ -337,14 +339,13 @@ enum { DENC, MSIOF, FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI, - SDHI0, SDHI1, SDHI2, SDHI3, - CMT, TSIF, SIU, + SDHI, CMT, TSIF, SIU, TMU0, TMU1, TMU2, VEU2, LCDC, /* interrupt groups */ - DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI, + DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, }; static struct intc_vect vectors[] __initdata = { @@ -369,8 +370,8 @@ static struct intc_vect vectors[] __init INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0), INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20), INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60), - INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0), - INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0), + INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0), + INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0), INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20), INTC_VECT(SIU, 0xf80), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), @@ -386,7 +387,6 @@ static struct intc_group groups[] __init INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI), - INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), }; static struct intc_mask_reg mask_registers[] __initdata = { @@ -408,7 +408,7 @@ static struct intc_mask_reg mask_registe { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI, FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } }, { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ - { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } }, + { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } }, { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ { 0, 0, 0, CMT, 0, USB, } }, { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ @@ -446,9 +446,13 @@ static struct intc_mask_reg ack_register { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups, - mask_registers, prio_registers, sense_registers, - ack_registers); +static struct intc_desc intc_desc __initdata = { + .name = "sh7366", + .force_enable = ENABLED, + .force_disable = DISABLED, + .hw = INTC_HW_DESC(vectors, groups, mask_registers, + prio_registers, sense_registers, ack_registers), +}; void __init plat_irq_setup(void) {