[Qemu-devel] [PATCH applied] virtio: move vmstate change tracking to core

["Michael S. Tsirkin" <mst@redhat.com>]

Move tracking vmstate change from virtio-net to virtio.c
as it is going to be used by virito-blk and virtio-pci
for the ioeventfd support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---

Just wanted to call attention to this patch
which is part of the ioeventfd series
(was part of a larger patch but I split it out).
It's applied on my tree, but if anyone objects
here's the last chance to.

 hw/virtio-net.c |   28 +++++++---------------------
 hw/virtio.c     |   22 ++++++++++++++++++++++
 hw/virtio.h     |    3 +++
 3 files changed, 32 insertions(+), 21 deletions(-)

diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index ec1bf8d..ccb3e63 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -54,8 +54,6 @@ typedef struct VirtIONet
     uint8_t nouni;
     uint8_t nobcast;
     uint8_t vhost_started;
-    bool vm_running;
-    VMChangeStateEntry *vmstate;
     struct {
         int in_use;
         int first_multi;
@@ -102,7 +100,7 @@ static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config)
 static bool virtio_net_started(VirtIONet *n, uint8_t status)
 {
     return (status & VIRTIO_CONFIG_S_DRIVER_OK) &&
-        (n->status & VIRTIO_NET_S_LINK_UP) && n->vm_running;
+        (n->status & VIRTIO_NET_S_LINK_UP) && n->vdev.vm_running;
 }
 
 static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
@@ -453,7 +451,7 @@ static void virtio_net_handle_rx(VirtIODevice *vdev, VirtQueue *vq)
 static int virtio_net_can_receive(VLANClientState *nc)
 {
     VirtIONet *n = DO_UPCAST(NICState, nc, nc)->opaque;
-    if (!n->vm_running) {
+    if (!n->vdev.vm_running) {
         return 0;
     }
 
@@ -708,7 +706,7 @@ static int32_t virtio_net_flush_tx(VirtIONet *n, VirtQueue *vq)
         return num_packets;
     }
 
-    assert(n->vm_running);
+    assert(n->vdev.vm_running);
 
     if (n->async_tx.elem.out_num) {
         virtio_queue_set_notification(n->tx_vq, 0);
@@ -769,7 +767,7 @@ static void virtio_net_handle_tx_timer(VirtIODevice *vdev, VirtQueue *vq)
     VirtIONet *n = to_virtio_net(vdev);
 
     /* This happens when device was stopped but VCPU wasn't. */
-    if (!n->vm_running) {
+    if (!n->vdev.vm_running) {
         n->tx_waiting = 1;
         return;
     }
@@ -796,7 +794,7 @@ static void virtio_net_handle_tx_bh(VirtIODevice *vdev, VirtQueue *vq)
     }
     n->tx_waiting = 1;
     /* This happens when device was stopped but VCPU wasn't. */
-    if (!n->vm_running) {
+    if (!n->vdev.vm_running) {
         return;
     }
     virtio_queue_set_notification(vq, 0);
@@ -806,7 +804,7 @@ static void virtio_net_handle_tx_bh(VirtIODevice *vdev, VirtQueue *vq)
 static void virtio_net_tx_timer(void *opaque)
 {
     VirtIONet *n = opaque;
-    assert(n->vm_running);
+    assert(n->vdev.vm_running);
 
     n->tx_waiting = 0;
 
@@ -823,7 +821,7 @@ static void virtio_net_tx_bh(void *opaque)
     VirtIONet *n = opaque;
     int32_t ret;
 
-    assert(n->vm_running);
+    assert(n->vdev.vm_running);
 
     n->tx_waiting = 0;
 
@@ -988,16 +986,6 @@ static NetClientInfo net_virtio_info = {
     .link_status_changed = virtio_net_set_link_status,
 };
 
-static void virtio_net_vmstate_change(void *opaque, int running, int reason)
-{
-    VirtIONet *n = opaque;
-    n->vm_running = running;
-    /* This is called when vm is started/stopped,
-     * it will start/stop vhost backend if appropriate
-     * e.g. after migration. */
-    virtio_net_set_status(&n->vdev, n->vdev.status);
-}
-
 VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
                               virtio_net_conf *net)
 {
@@ -1052,7 +1040,6 @@ VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
     n->qdev = dev;
     register_savevm(dev, "virtio-net", -1, VIRTIO_NET_VM_VERSION,
                     virtio_net_save, virtio_net_load, n);
-    n->vmstate = qemu_add_vm_change_state_handler(virtio_net_vmstate_change, n);
 
     add_boot_device_path(conf->bootindex, dev, "/ethernet-phy@0");
 
@@ -1062,7 +1049,6 @@ VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
 void virtio_net_exit(VirtIODevice *vdev)
 {
     VirtIONet *n = DO_UPCAST(VirtIONet, vdev, vdev);
-    qemu_del_vm_change_state_handler(n->vmstate);
 
     /* This will stop vhost backend if appropriate. */
     virtio_net_set_status(vdev, 0);
diff --git a/hw/virtio.c b/hw/virtio.c
index 07dbf86..1d20be2 100644
--- a/hw/virtio.c
+++ b/hw/virtio.c
@@ -743,11 +743,31 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f)
 
 void virtio_cleanup(VirtIODevice *vdev)
 {
+    qemu_del_vm_change_state_handler(vdev->vmstate);
     if (vdev->config)
         qemu_free(vdev->config);
     qemu_free(vdev->vq);
 }
 
+static void virtio_vmstate_change(void *opaque, int running, int reason)
+{
+    VirtIODevice *vdev = opaque;
+    bool backend_run = running && (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK);
+    vdev->vm_running = running;
+
+    if (backend_run) {
+        virtio_set_status(vdev, vdev->status);
+    }
+
+    if (vdev->binding->vmstate_change) {
+        vdev->binding->vmstate_change(vdev->binding_opaque, backend_run);
+    }
+
+    if (!backend_run) {
+        virtio_set_status(vdev, vdev->status);
+    }
+}
+
 VirtIODevice *virtio_common_init(const char *name, uint16_t device_id,
                                  size_t config_size, size_t struct_size)
 {
@@ -774,6 +794,8 @@ VirtIODevice *virtio_common_init(const char *name, uint16_t device_id,
     else
         vdev->config = NULL;
 
+    vdev->vmstate = qemu_add_vm_change_state_handler(virtio_vmstate_change, vdev);
+
     return vdev;
 }
 
diff --git a/hw/virtio.h b/hw/virtio.h
index 02fa312..bd52742 100644
--- a/hw/virtio.h
+++ b/hw/virtio.h
@@ -95,6 +95,7 @@ typedef struct {
     unsigned (*get_features)(void * opaque);
     int (*set_guest_notifiers)(void * opaque, bool assigned);
     int (*set_host_notifier)(void * opaque, int n, bool assigned);
+    void (*vmstate_change)(void * opaque, bool running);
 } VirtIOBindings;
 
 #define VIRTIO_PCI_QUEUE_MAX 64
@@ -123,6 +124,8 @@ struct VirtIODevice
     const VirtIOBindings *binding;
     void *binding_opaque;
     uint16_t device_id;
+    bool vm_running;
+    VMChangeStateEntry *vmstate;
 };
 
 static inline void virtio_set_status(VirtIODevice *vdev, uint8_t val)
-- 
1.7.3.2.91.g446ac