diff for duplicates of <20110122134513.1e1d512a@stein> diff --git a/a/1.txt b/N1/1.txt index f9afa1e..ba889f1 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,7 +5,7 @@ below the signature. This is a Macmini1,1 i.e. a first-generation Intel-based mini. I haven't experienced any actual problem during usage but haven't used it a lot under 2.6.38-rc yet. -applesmc: key\x137 fan=1 temp=7 acc=0 lux=0 kbd=0 +applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0 applesmc: init_smcreg() took 50 ms BUG: key f4891a1c not in .data! ------------[ cut here ]------------ @@ -59,7 +59,7 @@ BUG: key f4100f7c not in .data! Any ideas where this may come from? -- Stefan Richter --===-=-= ---= =-=- +-=====-==-== ---= =-==- http://arcgraph.de/sr/ @@ -83,7 +83,7 @@ BIOS-provided physical RAM map: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.4 present. DMI: Mac-F4208EC8/Macmini1,1, BIOS MM11.88Z.0055.B08.0610121326 10/12/06 -e820 update range: 0000000000000000 - 0000000000010000 (usable) => (reserved) +e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7e0d5 max_arch_pfn = 0x100000 MTRR default type: uncachable @@ -189,7 +189,7 @@ Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 -CPU 0 irqstacks, hardõc0a000 softõc0c000 +CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled @@ -207,7 +207,7 @@ ODEBUG: 5 of 5 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 2333.309 MHz processor. -Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.61 BogoMIPS (lpj#33309) +Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.61 BogoMIPS (lpj=2333309) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 @@ -229,7 +229,7 @@ PEBS disabled due to CPU errata. ... fixed-purpose events: 3 ... event mask: 0000000700000003 lockdep: fixing up alternatives. -CPU 1 irqstacks, hardõd42000 softõd44000 +CPU 1 irqstacks, hard=f5d42000 soft=f5d44000 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs @@ -653,8 +653,8 @@ generic-usb 0003:046D:C042.0002: claimed by neither input, hiddev nor hidraw applesmc: F0Mn\x1a: read arg fail HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 -hda_codec: STAC922x, Apple subsys_id\x106b0800 -applesmc: key\x137 fan=1 temp=7 acc=0 lux=0 kbd=0 +hda_codec: STAC922x, Apple subsys_id=106b0800 +applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0 applesmc: init_smcreg() took 50 ms BUG: key f4891a1c not in .data! ------------[ cut here ]------------ @@ -742,9 +742,3 @@ sky2 0000:01:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. - - -_______________________________________________ -lm-sensors mailing list -lm-sensors@lm-sensors.org -http://lists.lm-sensors.org/mailman/listinfo/lm-sensors diff --git a/a/content_digest b/N1/content_digest index 81a75a5..9356317 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,6 +1,6 @@ "From\0Stefan Richter <stefanr@s5r6.in-berlin.de>\0" - "Subject\0[lm-sensors] 2.6.38-rc1/-2: applesmc lockdep warning\0" - "Date\0Sat, 22 Jan 2011 12:45:13 +0000\0" + "Subject\02.6.38-rc1/-2: applesmc lockdep warning\0" + "Date\0Sat, 22 Jan 2011 13:45:13 +0100\0" "To\0Henrik Rydberg <rydberg@euromail.se>" " lm-sensors@lm-sensors.org\0" "Cc\0linux-kernel@vger.kernel.org\0" @@ -13,7 +13,7 @@ "Intel-based mini. I haven't experienced any actual problem during usage\n" "but haven't used it a lot under 2.6.38-rc yet.\n" "\n" - "applesmc: key\0237 fan=1 temp=7 acc=0 lux=0 kbd=0\n" + "applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0\n" "applesmc: init_smcreg() took 50 ms\n" "BUG: key f4891a1c not in .data!\n" "------------[ cut here ]------------\n" @@ -67,7 +67,7 @@ "Any ideas where this may come from?\n" "-- \n" "Stefan Richter\n" - "-===-=-= ---= =-=-\n" + "-=====-==-== ---= =-==-\n" "http://arcgraph.de/sr/\n" "\n" "\n" @@ -91,7 +91,7 @@ "Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!\n" "DMI 2.4 present.\n" "DMI: Mac-F4208EC8/Macmini1,1, BIOS MM11.88Z.0055.B08.0610121326 10/12/06\n" - "e820 update range: 0000000000000000 - 0000000000010000 (usable) => (reserved)\n" + "e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)\n" "e820 remove range: 00000000000a0000 - 0000000000100000 (usable)\n" "last_pfn = 0x7e0d5 max_arch_pfn = 0x100000\n" "MTRR default type: uncachable\n" @@ -197,7 +197,7 @@ "\tRCU-based detection of stalled CPUs is disabled.\n" "\tVerbose stalled-CPUs detection is disabled.\n" "NR_IRQS:320\n" - "CPU 0 irqstacks, hard\303\265c0a000 soft\303\265c0c000\n" + "CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000\n" "Extended CMOS year: 2000\n" "Console: colour VGA+ 80x25\n" "console [tty0] enabled\n" @@ -215,7 +215,7 @@ "hpet clockevent registered\n" "Fast TSC calibration using PIT\n" "Detected 2333.309 MHz processor.\n" - "Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.61 BogoMIPS (lpj#33309)\n" + "Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.61 BogoMIPS (lpj=2333309)\n" "pid_max: default: 32768 minimum: 301\n" "Mount-cache hash table entries: 512\n" "CPU: Physical Processor ID: 0\n" @@ -237,7 +237,7 @@ "... fixed-purpose events: 3\n" "... event mask: 0000000700000003\n" "lockdep: fixing up alternatives.\n" - "CPU 1 irqstacks, hard\303\265d42000 soft\303\265d44000\n" + "CPU 1 irqstacks, hard=f5d42000 soft=f5d44000\n" "Booting Node 0, Processors #1 Ok.\n" "Initializing CPU#1\n" "Brought up 2 CPUs\n" @@ -661,8 +661,8 @@ "applesmc: F0Mn\032: read arg fail\n" "HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22\n" "HDA Intel 0000:00:1b.0: setting latency timer to 64\n" - "hda_codec: STAC922x, Apple subsys_id\0206b0800\n" - "applesmc: key\0237 fan=1 temp=7 acc=0 lux=0 kbd=0\n" + "hda_codec: STAC922x, Apple subsys_id=106b0800\n" + "applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0\n" "applesmc: init_smcreg() took 50 ms\n" "BUG: key f4891a1c not in .data!\n" "------------[ cut here ]------------\n" @@ -749,12 +749,6 @@ "sky2 0000:01:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both\n" "RPC: Registered udp transport module.\n" "RPC: Registered tcp transport module.\n" - "RPC: Registered tcp NFSv4.1 backchannel transport module.\n" - "\n" - "\n" - "_______________________________________________\n" - "lm-sensors mailing list\n" - "lm-sensors@lm-sensors.org\n" - http://lists.lm-sensors.org/mailman/listinfo/lm-sensors + RPC: Registered tcp NFSv4.1 backchannel transport module. -8336864b1df905a812286e2dcea7ce52a46bc04da45320c96447a5b4ab74fb2c +0bb0a48edeb81abc7694b16fbc303a3cfe663c2b8b1562e67e1b85a0744ceda9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.