From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Mon, 31 Jan 2011 21:08:58 +0100
Subject: [U-Boot] [PATCH 5/6] powerpc/85xx: do not initialize QE if QE's
	firmware is in nand flash
In-Reply-To: <1296499317-26616-6-git-send-email-Haiying.Wang@freescale.com>
References: <1296499317-26616-1-git-send-email-Haiying.Wang@freescale.com>
	<1296499317-26616-6-git-send-email-Haiying.Wang@freescale.com>
Message-ID: <20110131200858.BA104D4D67C@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Haiying.Wang at freescale.com,

In message <1296499317-26616-6-git-send-email-Haiying.Wang@freescale.com> you wrote:
> From: Haiying Wang <Haiying.Wang@freescale.com>
> 
> For some board which doesn't have NOR flash and the QE's firmware(ucode) is
> saved in its NAND flash, we don't want call qe_init in cpu_init_r, but will
> call it later after nand is initialized.

Is there a pressing reason to do this so early for other boards?  Can
not all boards initialize this later?


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I didn't know it was impossible when I did it."