From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 09 Feb 2011 14:28:56 +0000 Subject: Re: [lm-sensors] Supported I2C addresses for EMC temperature sensors Message-Id: <20110209142856.GA18659@ericsson.com> List-Id: References: <20110124202454.GA640@ericsson.com> In-Reply-To: <20110124202454.GA640@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Wed, Feb 09, 2011 at 07:36:40AM -0500, Jean Delvare wrote: > Hi Guenter, > > On Mon, 24 Jan 2011 12:24:54 -0800, Guenter Roeck wrote: > > while looking into EMC temperature sensor detection, I noticed a discrepancy > > in some of the I2C chip addresses listed in sensors-detect vs. the addresses > > supported per datasheets. > > > > Per sensors-detect, addresses supported for emc1403, emc1404, and emc1423 are > > i2c_addrs => [0x18, 0x2a, 0x4c, 0x4d], > > > > However, adccording to the datasheets, supported addresses should be > > 0x18, 0x29, 0x4c, 0x4d > > for emc1403 and emc1404, and > > 0x4c > > for emc1423. > > > > Any idea what is correct ? > > I would trust the datasheets. Which means that sensors-detect must be > fixed, and the emc1403 driver as well. > Ok, I'll fix it. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors