From: Marc Koschewski <marc@osknowledge.org>
To: linux-kernel@vger.kernel.org, bskeggs@redhat.com
Subject: [REGRESSION? 2.6.38-rc4] nouveau NV50 screen freeze
Date: Fri, 11 Feb 2011 09:24:55 +0100 [thread overview]
Message-ID: <20110211082455.GA16802@marc.osknowledge.org> (raw)
Hi all,
I don't know if I suffer a regression of nouveau in 2.6.38-rc4.
It feels like the screens tends to freeze often in that version but I cannot be
sure if it is the 2.6.38-rc4 release or something else.
The current 2.6.37 kernel has this in Xorg.0.log:
[ 71.783] (II) AutoAddDevices is off - not adding device.
[ 78.808] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 78.808] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 79.422] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 79.422] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 80.115] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 80.115] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 80.729] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 80.729] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 507.789] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 507.789] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 567.978] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 567.978] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
The current 2.6.38-rc4 kernel has this in Xorg.0.log:
[ 75.466] (II) AutoAddDevices is off - not adding device.
[ 89.585] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 89.585] (II) NOUVEAU(0): NVLeaveVT is called.
[ 97.577] (II) Open ACPI successful (/var/run/acpid.socket)
[ 97.578] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 97.578] (II) NOUVEAU(0): NVEnterVT is called.
[ 97.691] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 97.691] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 98.322] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 957.921] (II) 3rd Button detected: disabling emulate3Button
[ 2852.323] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2852.323] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2855.850] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2855.850] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2855.850] (II) NOUVEAU(0): NVEnterVT is called.
[ 2855.966] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2855.966] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2856.597] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2863.361] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2863.361] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2879.447] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2879.447] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2879.447] (II) NOUVEAU(0): NVEnterVT is called.
[ 2879.561] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2879.561] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2880.192] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2884.543] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2884.543] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2890.337] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2890.337] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2890.337] (II) NOUVEAU(0): NVEnterVT is called.
[ 2890.451] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2890.451] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2891.081] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2895.780] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2895.780] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2917.475] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2917.475] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2917.475] (II) NOUVEAU(0): NVEnterVT is called.
[ 2917.588] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2917.588] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2918.219] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2921.735] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2921.735] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2988.993] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2988.993] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2988.993] (II) NOUVEAU(0): NVEnterVT is called.
[ 2989.107] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2989.107] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2989.738] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2997.111] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2997.111] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2997.952] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2997.952] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2997.952] (II) NOUVEAU(0): NVEnterVT is called.
[ 2998.065] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2998.065] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2998.700] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2999.201] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2999.201] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3045.403] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3045.404] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3045.404] (II) NOUVEAU(0): NVEnterVT is called.
[ 3045.519] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 3045.519] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 3046.151] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 3118.308] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3118.308] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3119.091] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3119.091] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3119.091] (II) NOUVEAU(0): NVEnterVT is called.
[ 3119.204] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 3119.204] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 3119.838] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 3120.522] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3120.522] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3125.951] (II) UnloadModule: "mouse"
[ 3125.951] (II) UnloadModule: "kbd"
[ 3125.961] (II) NOUVEAU(0): Closed GPU channel 2
[ 3125.976] (WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call
but I don't know if it's related to the screen freeze. Does anyone experience
the similar behavior?
Regards,
Marc
--
Marc Koschewski
reply other threads:[~2011-02-11 8:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110211082455.GA16802@marc.osknowledge.org \
--to=marc@osknowledge.org \
--cc=bskeggs@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.