From: Ingo Molnar <mingo@elte.hu>
To: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>,
Yinghai Lu <yhlu.kernel@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
lkml <linux-kernel@vger.kernel.org>
Subject: Re: [RFC 1/2 -tip/master] x86, x2apic: minimize IPI register writes using cluster groups
Date: Tue, 15 Feb 2011 04:22:59 +0100 [thread overview]
Message-ID: <20110215032259.GA8489@elte.hu> (raw)
In-Reply-To: <4D5945C8.4080108@gmail.com>
* Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> On 02/14/2011 02:45 PM, Ingo Molnar wrote:
> >
> >* Cyrill Gorcunov<gorcunov@gmail.com> wrote:
> >
> >>In the case of x2apic cluster mode we can group IPI register writes based on the
> >>cluster group instead of individual per-cpu destiantion messages. This reduces the
> >>apic register writes and reduces the amount of IPI messages (in the best case we
> >>can reduce it by a factor of 16).
> >>
> >>With this change, microbenchmark measuring the cost of flush_tlb_others(), with
> >>the flush tlb IPI being sent from a cpu in the socket-1 to all the logical cpus in
> >>socket-2 (on a Westmere-EX system that has 20 logical cpus in a socket) is 3x
> >>times better now (compared to the former 'send one-by-one' algorithm).
> >
> >Pretty nice!
> >
> >I have a few structural and nitpicking comments:
>
> Thanks a lot for review, Ingo! I'll address all the nits during this week.
>
> ...
> >
> >>+void x2apic_init_cpu_notifier(void)
> >>+{
> >>+ int cpu = smp_processor_id();
> >>
> >>+ zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
> >>+ zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
> >>+ BUG_ON(!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu));
> >
> >Such a BUG_ON() is not particularly user friendly - and this could trigger during
> >CPU hotplug events, i.e. while the system is fully booted up, right?
> >
> >Thanks,
> >
> > Ingo
>
> Yup is not that much friendly but it's called during system bootup,
> hotplug events are handled by
>
> +static int __cpuinit
> +cluster_setup(struct notifier_block *nfb, unsigned long action, void *hcpu)
> +{
> + unsigned int cpu = (unsigned long)hcpu;
> + int err = 0;
> +
> + switch (action) {
> + case CPU_UP_PREPARE:
> + zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
> + zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
> + if (!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu)) {
> + free_cpumask_var(per_cpu(cpus_in_cluster, cpu));
> + free_cpumask_var(per_cpu(ipi_mask, cpu));
> + err = -ENOMEM;
> + }
> + break;
>
> so it returns -ENOMEM if failed. And btw just noted that we forgot to make
> x2apic_init_cpu_notifier being in __init section.
>
> Or I miss something?
Is there no GFP_NOFAIL or GFP_FAIL_ON_PANIC variant that could be used the 'must not
fail' property of the boot-time allocation?
Thanks,
Ingo
next prev parent reply other threads:[~2011-02-15 3:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-03 21:03 [RFC 1/2 -tip/master] x86, x2apic: minimize IPI register writes using cluster groups Cyrill Gorcunov
2011-02-14 11:45 ` Ingo Molnar
2011-02-14 15:10 ` Cyrill Gorcunov
2011-02-15 3:22 ` Ingo Molnar [this message]
2011-02-15 8:39 ` Cyrill Gorcunov
2011-02-16 9:23 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110215032259.GA8489@elte.hu \
--to=mingo@elte.hu \
--cc=gorcunov@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.