From: "John W. Linville" <linville@tuxdriver.com>
To: Takashi Kawamoto <tkawamoto@silex.jp>
Cc: linux-wireless@vger.kernel.org, Yoshitaka Imura <imura@silex.jp>,
Yasuo Bato <bato@silex.jp>, Yuji Sasaki <sasaki@silex.jp>,
Ryou Matsuura <matsuura@silex.jp>,
ath9k-devel@atheros.com
Subject: Re: BUG: AR9271 cause a Kernel Panic on ARM11 SMP environment
Date: Wed, 16 Feb 2011 09:52:01 -0500 [thread overview]
Message-ID: <20110216145201.GB10287@tuxdriver.com> (raw)
In-Reply-To: <20110216141657.9270.9AD4E5EB@silex.jp>
On Wed, Feb 16, 2011 at 02:17:07PM +0900, Takashi Kawamoto wrote:
> Dear all,
>
>
> When I make an AR9271 to perform as an iperf client with
> compat-wireless-2011-01-30, a Kernel Panic occurs.
>
> [log]
> =======================================================================
> BUG: spinlock lockup on CPU#1, iperf/552, 9f9aade4
> [<80030ca4>] (unwind_backtrace+0x0/0xdc) from [<801835ac>] (do_raw_spin_lock+0x14c/0x168)
> [<801835ac>] (do_raw_spin_lock+0x14c/0x168) from [<802e47c0>] (_raw_spin_lock_irqsave+0x10/0x18)
> [<802e47c0>] (_raw_spin_lock_irqsave+0x10/0x18) from [<7f17218c>] (hif_usb_send+0x34/0x26c [ath9k_htc])
> [<7f17218c>] (hif_usb_send+0x34/0x26c [ath9k_htc]) from [<7f17153c>] (htc_issue_send+0x64/0x6c [ath9k_htc])
> [<7f17153c>] (htc_issue_send+0x64/0x6c [ath9k_htc]) from [<7f171564>] (htc_send+0x20/0x24 [ath9k_htc])
> [<7f171564>] (htc_send+0x20/0x24 [ath9k_htc]) from [<7f1746d4>] (ath9k_htc_tx_start+0x23c/0x244 [ath9k_htc])
> [<7f1746d4>] (ath9k_htc_tx_start+0x23c/0x244 [ath9k_htc]) from [<7f1751c8>] (ath9k_htc_tx+0x7c/0xcc [ath9k_htc])
> [<7f1751c8>] (ath9k_htc_tx+0x7c/0xcc [ath9k_htc]) from [<7f0c50d4>] (__ieee80211_tx+0x124/0x194 [mac80211])
> [<7f0c50d4>] (__ieee80211_tx+0x124/0x194 [mac80211]) from [<7f0c51e4>] (ieee80211_tx+0xa0/0x1e0 [mac80211])
> [<7f0c51e4>] (ieee80211_tx+0xa0/0x1e0 [mac80211]) from [<7f0c6590>] (ieee80211_subif_start_xmit+0x6c0/0x6f8 [mac80211])
> [<7f0c6590>] (ieee80211_subif_start_xmit+0x6c0/0x6f8 [mac80211]) from [<80269220>] (dev_hard_start_xmit+0x1f8/0x2e0)
> [<80269220>] (dev_hard_start_xmit+0x1f8/0x2e0) from [<8027878c>] (sch_direct_xmit+0x70/0x1c8)
> [<8027878c>] (sch_direct_xmit+0x70/0x1c8) from [<802696e0>] (dev_queue_xmit+0x290/0x428)
> [<802696e0>] (dev_queue_xmit+0x290/0x428) from [<80287320>] (ip_finish_output+0x250/0x2a8)
> [<80287320>] (ip_finish_output+0x250/0x2a8) from [<80285178>] (ip_local_out+0x24/0x28)
> [<80285178>] (ip_local_out+0x24/0x28) from [<80286cac>] (ip_queue_xmit+0x2f4/0x35c)
> [<80286cac>] (ip_queue_xmit+0x2f4/0x35c) from [<80299010>] (tcp_transmit_skb+0x74c/0x7b8)
> [<80299010>] (tcp_transmit_skb+0x74c/0x7b8) from [<8029b5dc>] (tcp_write_xmit+0x860/0x978)
> [<8029b5dc>] (tcp_write_xmit+0x860/0x978) from [<8029b730>] (tcp_push_one+0x3c/0x48)
> [<8029b730>] (tcp_push_one+0x3c/0x48) from [<8028f840>] (tcp_sendmsg+0x864/0xaa4)
> [<8028f840>] (tcp_sendmsg+0x864/0xaa4) from [<80258ecc>] (sock_aio_write+0xe0/0xe8)
> [<80258ecc>] (sock_aio_write+0xe0/0xe8) from [<800bba20>] (do_sync_write+0x94/0xe0)
> [<800bba20>] (do_sync_write+0x94/0xe0) from [<800bc460>] (vfs_write+0xc4/0x154)
> [<800bc460>] (vfs_write+0xc4/0x154) from [<800bc59c>] (sys_write+0x3c/0x68)
> [<800bc59c>] (sys_write+0x3c/0x68) from [<8002a220>] (ret_fast_syscall+0x0/0x2c)
> =======================================================================
My guess would be that somehow you are leaking hif_dev->tx.tx_lock,
and then hanging when trying to retake it in hif_usb_send_tx.
Unfortunately, it is not obvious to me how that might happen...
> An environment of AR9271's host is as follows.
>
> [Host Environment]
> =======================================================================
> CPU : ARM11MP
> Kernel : 2.6.33 (SMP enabled)
> Distribution: Zoran Quatro inferno
> =======================================================================
>
> As long as I see, this panic happens under the following conditions.
>
> (1) When sending a data frame
> When AR9271 performs as an iperf server, this panic appears less
> frequently than as a client.
>
> (1) When transmission throughput is relatively high
> For example, this panic never seems to appear when Ping
> communication is performed.
>
> (2) When multi processor mode is enabled
> When SMP option of the kernel is disabled (CONFIG_SMP=m), this
> panic doesn't occur.
>
> I've not duplicated the same on a x86 environment yet.
>
> I suspect that spinlock usage in Tx routines of ath9k/hif_usb.c must
> have something to do with this panic.
>
> Have anyone come across the similar crash as this?
>
>
>
> Best Regards,
> Takashi Kawamoto
>
> ==================================================
> Takashi Kawamoto (E-Mail : tkawamoto@silex.jp)
> silex technology,Inc.
> Software Engineering Division
> Phone:+81-774-98-3877 FAX:+81-774-98-3678
> ==================================================
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2011-02-16 15:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 5:17 BUG: AR9271 cause a Kernel Panic on ARM11 SMP environment Takashi Kawamoto
2011-02-16 14:52 ` John W. Linville [this message]
2011-02-16 15:28 ` [internal-ath9k-devel] " Sujith
2011-02-17 1:54 ` Takashi Kawamoto
2011-02-17 12:23 ` Stanislaw Gruszka
2011-02-17 12:53 ` Takashi Kawamoto
2011-02-17 13:52 ` Stanislaw Gruszka
2011-02-28 6:12 ` Takashi Kawamoto
-- strict thread matches above, loose matches on Subject: below --
2011-02-16 5:08 Takashi Kawamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110216145201.GB10287@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=ath9k-devel@atheros.com \
--cc=bato@silex.jp \
--cc=imura@silex.jp \
--cc=linux-wireless@vger.kernel.org \
--cc=matsuura@silex.jp \
--cc=sasaki@silex.jp \
--cc=tkawamoto@silex.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.