From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Webb Subject: Re: IO_PAGE_FAULT from SATA card during boot Date: Thu, 17 Feb 2011 09:40:06 +0000 Message-ID: <20110217094005.GS21289@arachsys.com> References: <20110202135644.GG11670@arachsys.com> <4D49FB9F.9040304@gmail.com> <20110203085601.GB2490@arachsys.com> <20110207174838.GA21124@arachsys.com> <4D50A4B8.2070608@gmail.com> <20110208104157.GU2106@amd.com> <20110208110036.GA18763@arachsys.com> <20110208144805.GF19483@arachsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from alpha.arachsys.com ([91.203.57.7]:56449 "EHLO alpha.arachsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752696Ab1BQJkN (ORCPT ); Thu, 17 Feb 2011 04:40:13 -0500 Content-Disposition: inline In-Reply-To: <20110208144805.GF19483@arachsys.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Robert Hancock Cc: "Roedel, Joerg" , "linux-ide@vger.kernel.org" Chris Webb writes: > Robert Hancock writes: > > > Did you try different chipsets? The two sets of output you posted are > > both from Marvell 88SE9123-based cards. > > Oh, I may have been a muppet here then. I assumed the HPT cards would be a > different chipset. I'll find something completely different! A SIL-based AHCI controller card turns out to work fine in the same setup, so it does look like a problem specific to Marvell 88SE9123-based cards. Cheers, Chris.