From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: users@rt2x00.serialmonkey.com, linux-wireless@vger.kernel.org
Subject: [PATCH 2/8] rt2x00: Fix rt2800 txpower setting to correct value
Date: Sun, 20 Feb 2011 13:55:25 +0100 [thread overview]
Message-ID: <201102201355.26260.IvDoorn@gmail.com> (raw)
In-Reply-To: <201102201354.53379.IvDoorn@gmail.com>
From: RA-Jay Hung <Jay_Hung@ralinktech.com>
TX_PWR_CFG_* setting need to consider below cases
-compesate 20M/40M tx power delta for 2.4/5GHZ band
-limit maximum EIRP tx power to power_level of
regulatory requirement
Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 39 ++++--
drivers/net/wireless/rt2x00/rt2800lib.c | 236 ++++++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
3 files changed, 199 insertions(+), 77 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index ef8f605..457887c 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1703,11 +1703,14 @@ struct mac_iveiv_entry {
*/
/*
- * BBP 1: TX Antenna & Power
- * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm,
- * 3 - increase tx power by 6dBm
- */
-#define BBP1_TX_POWER FIELD8(0x07)
+ * BBP 1: TX Antenna & Power Control
+ * POWER_CTRL:
+ * 0 - normal,
+ * 1 - drop tx power by 6dBm,
+ * 2 - drop tx power by 12dBm,
+ * 3 - increase tx power by 6dBm
+ */
+#define BBP1_TX_POWER_CTRL FIELD8(0x07)
#define BBP1_TX_ANTENNA FIELD8(0x18)
/*
@@ -2001,23 +2004,26 @@ struct mac_iveiv_entry {
#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
/*
- * EEPROM Maximum TX power values
+ * EEPROM EIRP Maximum TX power values(unit: dbm)
*/
-#define EEPROM_MAX_TX_POWER 0x0027
-#define EEPROM_MAX_TX_POWER_24GHZ FIELD16(0x00ff)
-#define EEPROM_MAX_TX_POWER_5GHZ FIELD16(0xff00)
+#define EEPROM_EIRP_MAX_TX_POWER 0x0027
+#define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff)
+#define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00)
/*
* EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
* This is delta in 40MHZ.
- * VALUE: Tx Power dalta value (MAX=4)
+ * VALUE: Tx Power dalta value, MAX=4(unit: dbm)
* TYPE: 1: Plus the delta value, 0: minus the delta value
- * TXPOWER: Enable:
+ * ENABLE: enable tx power compensation for 40BW
*/
#define EEPROM_TXPOWER_DELTA 0x0028
-#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
-#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
-#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
+#define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080)
+#define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00)
+#define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000)
+#define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000)
/*
* EEPROM TXPOWER 802.11BG
@@ -2215,4 +2221,9 @@ struct mac_iveiv_entry {
#define TXPOWER_A_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+/*
+ * Board's maximun TX power limitation
+ */
+#define EIRP_MAX_TX_POWER_LIMIT 0x50
+
#endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7f44b97..d23a5d8 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1676,30 +1676,116 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®);
}
+static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
+ enum ieee80211_band band)
+{
+ u16 eeprom;
+ u8 comp_en;
+ u8 comp_type;
+ int comp_value;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
+
+ if (eeprom == 0xffff)
+ return 0;
+
+ if (band == IEEE80211_BAND_2GHZ) {
+ comp_en = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_ENABLE_2G);
+ if (comp_en) {
+ comp_type = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_TYPE_2G);
+ comp_value = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_VALUE_2G);
+ if (!comp_type)
+ comp_value = -comp_value;
+ }
+ } else {
+ comp_en = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_ENABLE_5G);
+ if (comp_en) {
+ comp_type = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_TYPE_5G);
+ comp_value = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_DELTA_VALUE_5G);
+ if (!comp_type)
+ comp_value = -comp_value;
+ }
+ }
+
+ return comp_value;
+}
+
+static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
+ int is_rate_b,
+ enum ieee80211_band band,
+ int power_level,
+ u8 txpower)
+{
+ u32 reg;
+ u16 eeprom;
+ u8 criterion;
+ u8 eirp_txpower;
+ u8 eirp_txpower_criterion;
+ u8 reg_limit;
+ int bw_comp = 0;
+
+ if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
+ return txpower;
+
+ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
+
+ if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
+ /*
+ * Check if eirp txpower exceed txpower_limit.
+ * We use OFDM 6M as criterion and its eirp txpower
+ * is stored at EEPROM_EIRP_MAX_TX_POWER.
+ * .11b data rate need add additional 4dbm
+ * when calculating eirp txpower.
+ */
+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
+ criterion = rt2x00_get_field32(reg, TX_PWR_CFG_0_6MBS);
+
+ rt2x00_eeprom_read(rt2x00dev,
+ EEPROM_EIRP_MAX_TX_POWER, &eeprom);
+
+ if (band == IEEE80211_BAND_2GHZ)
+ eirp_txpower_criterion = rt2x00_get_field16(eeprom,
+ EEPROM_EIRP_MAX_TX_POWER_2GHZ);
+ else
+ eirp_txpower_criterion = rt2x00_get_field16(eeprom,
+ EEPROM_EIRP_MAX_TX_POWER_5GHZ);
+
+ eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
+ (is_rate_b ? 4 : 0) + bw_comp;
+
+ reg_limit = (eirp_txpower > power_level) ?
+ (eirp_txpower - power_level) : 0;
+ } else
+ reg_limit = 0;
+
+ return txpower + bw_comp - reg_limit;
+}
+
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
- const int max_txpower)
+ struct ieee80211_conf *conf)
{
u8 txpower;
- u8 max_value = (u8)max_txpower;
u16 eeprom;
- int i;
+ int i, is_rate_b;
u32 reg;
u8 r1;
u32 offset;
+ enum ieee80211_band band = conf->channel->band;
+ int power_level = conf->power_level;
/*
- * set to normal tx power mode: +/- 0dBm
+ * set to normal bbp tx power control mode: +/- 0dBm
*/
rt2800_bbp_read(rt2x00dev, 1, &r1);
- rt2x00_set_field8(&r1, BBP1_TX_POWER, 0);
+ rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, 0);
rt2800_bbp_write(rt2x00dev, 1, r1);
-
- /*
- * The eeprom contains the tx power values for each rate. These
- * values map to 100% tx power. Each 16bit word contains four tx
- * power values and the order is the same as used in the TX_PWR_CFG
- * registers.
- */
offset = TX_PWR_CFG_0;
for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
@@ -1713,73 +1799,99 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i,
&eeprom);
- /* TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
+ is_rate_b = i ? 0 : 1;
+ /*
+ * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
* TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE0,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower);
- /* TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
+ /*
+ * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
* TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE1,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower);
- /* TX_PWR_CFG_0: 55MBS, TX_PWR_CFG_1: 48MBS,
+ /*
+ * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
* TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE2,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower);
- /* TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
+ /*
+ * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
* TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE3,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower);
/* read the next four txpower values */
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i + 1,
&eeprom);
- /* TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
+ is_rate_b = 0;
+ /*
+ * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
* TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE4,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower);
- /* TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
+ /*
+ * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
* TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE5,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower);
- /* TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
+ /*
+ * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
* TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE6,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower);
- /* TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
+ /*
+ * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
* TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
- * TX_PWR_CFG_4: unknown */
+ * TX_PWR_CFG_4: unknown
+ */
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- rt2x00_set_field32(®, TX_PWR_CFG_RATE7,
- min(txpower, max_value));
+ txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower);
rt2800_register_write(rt2x00dev, offset, reg);
@@ -1838,11 +1950,13 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev,
/* Always recalculate LNA gain before changing configuration */
rt2800_config_lna_gain(rt2x00dev, libconf);
- if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
rt2800_config_channel(rt2x00dev, libconf->conf,
&libconf->rf, &libconf->channel);
+ rt2800_config_txpower(rt2x00dev, libconf->conf);
+ }
if (flags & IEEE80211_CONF_CHANGE_POWER)
- rt2800_config_txpower(rt2x00dev, libconf->conf->power_level);
+ rt2800_config_txpower(rt2x00dev, libconf->conf);
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
rt2800_config_retry_limit(rt2x00dev, libconf);
if (flags & IEEE80211_CONF_CHANGE_PS)
@@ -3032,13 +3146,6 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
default_lna_gain);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &word);
- if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_24GHZ) == 0xff)
- rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_24GHZ, MAX_G_TXPOWER);
- if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_5GHZ) == 0xff)
- rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_5GHZ, MAX_A_TXPOWER);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_MAX_TX_POWER, word);
-
return 0;
}
EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
@@ -3154,6 +3261,15 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
#endif /* CONFIG_RT2X00_LIB_LEDS */
+ /*
+ * Check if support EIRP tx power limit feature.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, &eeprom);
+
+ if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
+ EIRP_MAX_TX_POWER_LIMIT)
+ __set_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
@@ -3306,7 +3422,6 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
char *default_power1;
char *default_power2;
unsigned int i;
- unsigned short max_power;
u16 eeprom;
/*
@@ -3431,26 +3546,21 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->channels_info = info;
- rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &eeprom);
- max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_24GHZ);
default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
for (i = 0; i < 14; i++) {
- info[i].max_power = max_power;
- info[i].default_power1 = TXPOWER_G_FROM_DEV(default_power1[i]);
- info[i].default_power2 = TXPOWER_G_FROM_DEV(default_power2[i]);
+ info[i].default_power1 = default_power1[i];
+ info[i].default_power2 = default_power2[i];
}
if (spec->num_channels > 14) {
- max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_5GHZ);
default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
for (i = 14; i < spec->num_channels; i++) {
- info[i].max_power = max_power;
- info[i].default_power1 = TXPOWER_A_FROM_DEV(default_power1[i]);
- info[i].default_power2 = TXPOWER_A_FROM_DEV(default_power2[i]);
+ info[i].default_power1 = default_power1[i];
+ info[i].default_power2 = default_power2[i];
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index fd28836..64c6ef5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -667,6 +667,7 @@ enum rt2x00_flags {
*/
CONFIG_SUPPORT_HW_BUTTON,
CONFIG_SUPPORT_HW_CRYPTO,
+ CONFIG_SUPPORT_POWER_LIMIT,
DRIVER_SUPPORT_CONTROL_FILTERS,
DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
--
1.7.2.3
next prev parent reply other threads:[~2011-02-20 12:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-20 12:54 [PATCH 1/8] rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna diversity support Ivo van Doorn
2011-02-20 12:55 ` Ivo van Doorn [this message]
2011-02-20 12:55 ` [PATCH 3/8] rt2x00: Minor optimization for devices with RTS/CTS offload Ivo van Doorn
2011-02-20 12:56 ` [PATCH 4/8] Revert "rt2x00 : avoid timestamp for monitor injected frame." Ivo van Doorn
2011-02-20 12:56 ` [PATCH 5/8] rt2x00: Remove superfluos empty line Ivo van Doorn
2011-02-20 12:56 ` [PATCH 6/8] rt2x00: Add/Modify protection related register definitions Ivo van Doorn
2011-02-20 12:57 ` [PATCH 7/8] rt2x00: Add/Modify the GPIO register definition Ivo van Doorn
2011-02-20 12:57 ` [PATCH 8/8] rt2x00: Add support for RT5390 chip Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201102201355.26260.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.