From: Martin Steigerwald <Martin@lichtvoll.de>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Linux PM mailing list <linux-pm@lists.linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: does hibernate to disk try hard enough to free memory?
Date: Wed, 23 Feb 2011 15:10:46 +0100 [thread overview]
Message-ID: <201102231511.15683.Martin@lichtvoll.de> (raw)
In-Reply-To: <201102222332.43864.rjw@sisk.pl>
[-- Attachment #1: Type: Text/Plain, Size: 2179 bytes --]
Am Tuesday 22 February 2011 schrieb Rafael J. Wysocki:
> On Tuesday, February 22, 2011, Martin Steigerwald wrote:
> > Am Tuesday 22 February 2011 schrieb Rafael J. Wysocki:
> > > On Tuesday, February 22, 2011, Martin Steigerwald wrote:
> > > > Hi!
> > > >
> > > > Since Radeon KMS I often have it that my ThinkPad T42 with 2 MiB
> > > > of RAM is not able to allocate memory for the hibernation image.
> > > > Before KMS hibernation only very rarely failed for that reason.
> > > >
> > > > Often I run without compositing at all as I believe this might
> > > > spare some pages as well. But this doesn't always help.
> > > >
> > > > It complains that to less pages could be freed. For example with
> > > > kernel 2.6.37:
> > > >
> > > > Feb 16 00:15:00 shambhala kernel: PM: Creating hibernation image:
> > > > Feb 16 00:15:00 shambhala kernel: PM: Need to copy 186577 pages
> > > > Feb 16 00:15:00 shambhala kernel: PM: Normal pages needed: 114411
> > > > + 1024, available pages: 112767
> > > > Feb 16 00:15:00 shambhala kernel: PM: Not enough free memory
> > > > Feb 16 00:15:00 shambhala kernel: PM: Error -12 creating
> > > > hibernation image Feb 16 00:15:00 shambhala kernel: Extended
> > > > CMOS year: 2000 Feb 16 00:15:00 shambhala kernel: ACPI: Waking
> > > > up from system sleep state S4
> > > > Feb 16 00:15:00 shambhala kernel: PM: early recover of devices
> > > > complete after 0.376 msecs
> > >
> > > What's the value in /sys/power/image_size?
> >
> > shambhala:~> cat /sys/power/image_size
> > 844206080
> >
> > Should I try with less?
>
> Yes, please. Try with 700000000 for example.
I replaced dropping by settings image_size to this valua and the ThinkPad
hibernated with KMail open. Thus seems to work, but I will test a bit
further.
Where does the higher value previously set come from? Autotuning? Is there
anything that can be improved with autotuning? If yes, I can file a bug
report. Otherwise I just try to find a good value for image size and be
done with it.
Thanks,
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-02-23 14:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-22 20:59 does hibernate to disk try hard enough to free memory? Martin Steigerwald
2011-02-22 20:59 ` Martin Steigerwald
2011-02-22 21:09 ` Rafael J. Wysocki
2011-02-22 22:07 ` Martin Steigerwald
2011-02-22 22:32 ` Rafael J. Wysocki
2011-02-22 22:32 ` Rafael J. Wysocki
2011-02-23 14:10 ` Martin Steigerwald
2011-02-23 14:10 ` Martin Steigerwald [this message]
2011-02-23 20:06 ` Rafael J. Wysocki
2011-03-05 14:41 ` Martin Steigerwald
2011-03-05 23:28 ` Rafael J. Wysocki
2011-03-05 23:28 ` Rafael J. Wysocki
2011-03-05 14:41 ` Martin Steigerwald
2011-02-23 20:06 ` Rafael J. Wysocki
2011-02-22 22:07 ` Martin Steigerwald
2011-02-22 21:09 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201102231511.15683.Martin@lichtvoll.de \
--to=martin@lichtvoll.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.