From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-usb@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Ozan Caglayan <ozan@pardus.org.tr>
Subject: Re: 2.6.38 regression caused by commit 415e12b
Date: Sun, 27 Feb 2011 21:34:06 -0800 [thread overview]
Message-ID: <20110228053346.GA2223@xanatos> (raw)
In-Reply-To: <20110228014218.GA11083@xanatos>
On Sun, Feb 27, 2011 at 05:42:18PM -0800, Sarah Sharp wrote:
> I'm having an issue with an xHCI (USB 3.0 host controller) Express Card.
> This card works fine on 2.6.37, but on 2.6.38-rc5, when I plug in the
> card, I get this output in dmesg:
>
> Feb 22 16:32:28 xanatos kernel: [ 119.345996] irq 23: nobody cared (try booting with the "irqpoll" option)
> Feb 22 16:32:28 xanatos kernel: [ 119.346002] Pid: 0, comm: kworker/0:0 Not tainted 2.6.38-rc5+ #745
> Feb 22 16:32:28 xanatos kernel: [ 119.346005] Call Trace:
> Feb 22 16:32:28 xanatos kernel: [ 119.346007] <IRQ> [<ffffffff8109a1f6>] ? __report_bad_irq+0x26/0xa0
> Feb 22 16:32:28 xanatos kernel: [ 119.346019] [<ffffffff8109a3fc>] ? note_interrupt+0x18c/0x1d0
> Feb 22 16:32:28 xanatos kernel: [ 119.346024] [<ffffffff8109ad7d>] ? handle_fasteoi_irq+0xcd/0x100
> Feb 22 16:32:28 xanatos kernel: [ 119.346029] [<ffffffff8100543d>] ? handle_irq+0x1d/0x30
> Feb 22 16:32:28 xanatos kernel: [ 119.346032] [<ffffffff81004bb8>] ? do_IRQ+0x58/0xd0
> Feb 22 16:32:28 xanatos kernel: [ 119.346037] [<ffffffff8149f5d3>] ? ret_from_intr+0x0/0xe
> Feb 22 16:32:28 xanatos kernel: [ 119.346040] <EOI> [<ffffffff8126f2d0>] ? acpi_idle_enter_c1+0x7e/0x99
> Feb 22 16:32:28 xanatos kernel: [ 119.346048] [<ffffffff8126f2b2>] ? acpi_idle_enter_c1+0x60/0x99
> Feb 22 16:32:28 xanatos kernel: [ 119.346054] [<ffffffff8138ac92>] ? cpuidle_idle_call+0x82/0xf0
> Feb 22 16:32:28 xanatos kernel: [ 119.346059] [<ffffffff81001906>] ? cpu_idle+0x56/0xb0
> Feb 22 16:32:28 xanatos kernel: [ 119.346064] [<ffffffff8149861b>] ? start_secondary+0x1c1/0x1c8
> Feb 22 16:32:28 xanatos kernel: [ 119.346068] [<ffffffff81263386>] ? acpi_ns_parse_table+0x2e/0x34
> Feb 22 16:32:28 xanatos kernel: [ 119.346073] [<ffffffff81267a8c>] ? acpi_load_tables+0x9c/0x15d
> Feb 22 16:32:28 xanatos kernel: [ 119.346076] handlers:
> Feb 22 16:32:28 xanatos kernel: [ 119.346078] [<ffffffffa0123500>] (usb_hcd_irq+0x0/0x70 [usbcore])
> Feb 22 16:32:28 xanatos kernel: [ 119.346100] Disabling IRQ #23
>
> This happens before the xHCI driver has a chance to start PCI
> initialization.
>
> I've been trying to bisect this on a slow laptop, so I haven't had a
> chance to test with the latest tree from Linus to see if this is already
> fixed. I'll do that later this evening.
Still broken on the latest from Linus' tree.
Sarah Sharp
next prev parent reply other threads:[~2011-02-28 5:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-28 1:42 2.6.38 regression caused by commit 415e12b Sarah Sharp
2011-02-28 5:34 ` Sarah Sharp [this message]
2011-02-28 20:29 ` Rafael J. Wysocki
2011-03-01 18:31 ` Sarah Sharp
2011-03-01 20:55 ` Rafael J. Wysocki
2011-03-01 22:51 ` Sarah Sharp
2011-03-01 23:30 ` Rafael J. Wysocki
2011-03-02 0:04 ` Sarah Sharp
2011-03-02 0:17 ` Rafael J. Wysocki
2011-03-02 3:42 ` Sarah Sharp
2011-03-02 11:21 ` Rafael J. Wysocki
2011-03-02 22:30 ` [PATCH 0/2] " Rafael J. Wysocki
2011-03-02 22:32 ` [PATCH 1/2] PCI/ACPI: Report ASPM support to BIOS if not disabled from command line Rafael J. Wysocki
2011-03-02 22:33 ` [PATCH 2/2] PCI/ACPI: Report MSI " Rafael J. Wysocki
2011-03-04 17:52 ` [PATCH 0/2] Re: 2.6.38 regression caused by commit 415e12b Sarah Sharp
2011-03-04 20:32 ` Rafael J. Wysocki
2011-03-14 23:56 ` Sarah Sharp
2011-03-15 0:02 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110228053346.GA2223@xanatos \
--to=sarah.a.sharp@linux.intel.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=ozan@pardus.org.tr \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.