All of lore.kernel.org
 help / color / mirror / Atom feed
From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: Re: partitions
Date: Mon, 28 Feb 2011 09:57:57 +0100	[thread overview]
Message-ID: <201102280957.57164.jbe@pengutronix.de> (raw)
In-Reply-To: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B00D51@SRV-VS06.TELEVIC.COM>

Vanalme Filip wrote:
> I'm not that familiar with partitions in Barebox. On my i.MX27 board, I now
> have :
>
> barebox:/ devinfo
>
> devices:
> |----imx_serial0
> |----cs0
> |----ramfs0
> |----devfs0
> |----mem0 (defaultenv)
> |----mem1 (mem)
> |----imx_spi1
> |----mc137830 (pmic)
> |----mem2 (ram0)
> |----imx_nand0
> |----nand0 (nand0, nand_oob0, self_raw, env_raw, nand0.barebox,
> | nand0.bareboxenv, nand0.kernel, nand0.root) ----fec_imx0
> |----miidev0 (phy0)
> |----eth0
>
> drivers:
> imx_serial
>      ramfs
>      devfs
>    fec_imx
>     miidev
>   imx_nand
>  cfi_flash
>    imx_spi
>      imxfb
>    mc13783
>        mem
> barebox:/
>
> and :
>
> barebox:/ ls -l /dev
> cr-------- 4294967295 zero
> crw-------       6125 defaultenv
> crw------- 4294967295 mem
> crw-------        256 pmic
> crw-------  134217728 ram0
> crw-------  268435456 nand0
> cr--------    8388608 nand_oob0
> crw-------         32 phy0
> crw-------     262144 self_raw
> crw-------     262144 self0
> crw-------     131072 env_raw
> crw-------     131072 env0
> crw-------     262144 nand0.barebox
> crw-------     131072 nand0.bareboxenv
> crw-------    2097152 nand0.kernel
> crw-------  265945088 nand0.root
> barebox:/
>
> I think this looks OK.
> However, I expected this to work (I took this from descriptions on the
> Internet...) :
>
> barebox:/ erase /dev/nand0.kernel.bb
> stat /dev/nand0.kernel.bb: No such file or directory
> barebox:/
>
> and
>
> barebox:/ tftp zImage /dev/nand0.kernel.bb
> open: Read-only file system
> barebox:/
>
>
> Is there any documentation that handles/describes this ? (e.g. what's the
> extension .bb ?)

'bb' means "Bad Block", and defines a layer that is bad block aware, and can 
handle it in a correct manner.

Add "CONFIG_GLOB=y" to make a script work, that add the *.bb names to all 
existing nand partitions.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-02-28  9:00 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-28  8:36 partitions Vanalme Filip
2011-02-28  8:47 ` partitions Baruch Siach
2011-02-28  8:57   ` partitions Vanalme Filip
2011-02-28 15:05     ` partitions Vanalme Filip
2011-02-28  8:57 ` Juergen Beisert [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-01-28 21:24 partitions Roberto Spadim
     [not found] ` <AANLkTim_16xzRaQJLd1QGd5Dx2LScNX-VUjxrN5uXZng@mail.gmail.com>
2011-01-28 21:45   ` partitions Roberto Spadim
2011-01-28 22:39     ` partitions Doug Dumitru
2011-01-29  1:17       ` partitions Roberto Spadim
2011-01-29  1:22       ` partitions Hank Barta
2011-01-29  3:46         ` partitions Phillip Susi
2011-01-29  4:17           ` partitions Roberto Spadim
2011-01-29  3:40 ` partitions Phillip Susi
2004-08-12 21:57 partitions Paul Gimpelj
     [not found] ` <20040812221226.GA27392@boogeyman.armory.com>
2004-08-12 23:00   ` partitions Paul Gimpelj
2004-08-13  8:00     ` partitions Dr. Keith G. Bowden
2004-08-14  8:29 ` partitions Urs Thuermann
2002-07-24 16:11 partitions David Chow
2002-07-24 16:18 ` partitions Mr. James W. Laferriere
2002-07-24 16:32   ` partitions Randy.Dunlap
2002-07-24 18:47 ` partitions Andries Brouwer
2002-07-24 19:02   ` partitions Alexander Viro
2002-07-24 19:29     ` partitions Andries Brouwer
2002-07-25 12:09       ` partitions David Chow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201102280957.57164.jbe@pengutronix.de \
    --to=jbe@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.