From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Fri, 11 Mar 2011 17:47:29 +0000 Subject: Re: [lm-sensors] RFC: nct6776f support in the w83627ehf and fan Message-Id: <20110311174729.GA1481@ericsson.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Fri, Mar 11, 2011 at 12:09:22PM -0500, Robert Kaiser wrote: > Ian Dobson schrieb: > > Any chance you can have a look in the BIOS and email the exact values > > you see there. >=20 > Right at initial boot of the day I had this there (thought I'd give you=20 > all values and not just voltages, in case other settings warrant a=20 > comparison as well): >=20 > CPU Fan 1028 RPM > Front Fan 0 RPM > Rear Fan 0 RPM >=20 > Processor Temperature 61=B0C > PCH Temperature 43=B0C > Memory Temperature 24=B0C > VR Temperature 31=B0C >=20 > +12.0V 12.23 V > +5.0V 5.03 V > +3.3V 3.32 V > Memory Vcc 1.57 V > Processor Vcc 1.20 V > PCH Vcc 1.08 V > +3.3 Standby 3.42 V >=20 > Now, a few hours later (sorry, didn't get to it right away), sensors=20 > gives me the following: >=20 My wild guess: > nct6775-isa-0290 > Adapter: ISA adapter > Vcore: +1.16 V (min =3D +0.00 V, max =3D +1.74 V) > in1: +1.11 V (min =3D +0.00 V, max =3D +0.00 V) ALARM =3D 12V (*11) > AVCC: +3.31 V (min =3D +2.98 V, max =3D +3.63 V) > +3.3V: +3.31 V (min =3D +2.98 V, max =3D +3.63 V) > in4: +1.02 V (min =3D +0.00 V, max =3D +0.00 V) ALARM =3D 5V (*5) > in5: +1.05 V (min =3D +0.00 V, max =3D +0.00 V) ALARM =3D Memory Vcc (*1.5) > in6: +1.08 V (min =3D +0.00 V, max =3D +0.00 V) ALARM =3D PCH Vcc > 3VSB: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) > Vbat: +3.38 V (min =3D +2.70 V, max =3D +3.30 V) ALARM Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors