From: Guenter Roeck <guenter.roeck@ericsson.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH v2] sensors: Add support for additional
Date: Wed, 16 Mar 2011 04:20:06 +0000 [thread overview]
Message-ID: <20110316042006.GA25075@ericsson.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 21672 bytes --]
This patch adds support for additional sensor attributes to the sensors command.
v2: Incorporated feedback from code review as follows.
- Changed several variable and function names to better match functionality.
- Removed unnecessary conditionals.
- Modified output to better match original alignment.
- Always print alarms if set, even if there are no limit registers
- Added range check to get_sensor_limit_data() to avoid buffer overruns.
If an overrun occurs, display an error message and try to write a core dump.
- Added comment explaining when alarms are queued, and why alarm values are
not queued.
- Avoid use of strcpy() and strcat(). Instead, use patch from Jean's
review to attach temperature units to limit values.
- Print highest/lowest as well as max/crit power attributes if provided.
- Replace MIN/MAX temperature alarms with LOW/HIGH.
- If an attribute value is 0, display the value with its base unit,
not with the minumum supported unit.
- Replace "emergency" with "emerg" for emergency high temperature attributes.
An example sensors output from a system with lots of sensors is attached
for reference.
--
Index: prog/sensors/chips.c
===================================================================
--- prog/sensors/chips.c (revision 5939)
+++ prog/sensors/chips.c (working copy)
@@ -24,6 +24,8 @@
#include <stdlib.h>
#include <string.h>
#include <math.h>
+#include <sys/types.h>
+#include <signal.h>
#include "main.h"
#include "chips.h"
@@ -126,38 +128,159 @@
return max_size + 2;
}
-static void print_temp_limits(double limit1, double limit2,
- const char *name1, const char *name2, int alarm)
+static void print_alarms(struct sensor_subfeature_data *alarms, int alarm_count,
+ int leading_spaces)
{
- if (fahrenheit) {
- limit1 = deg_ctof(limit1);
- limit2 = deg_ctof(limit2);
- }
+ int i;
- if (name2) {
- printf("(%-4s = %+5.1f%s, %-4s = %+5.1f%s) ",
- name1, limit1, degstr,
- name2, limit2, degstr);
- } else if (name1) {
- printf("(%-4s = %+5.1f%s) ",
- name1, limit1, degstr);
- } else {
- printf(" ");
+ printf("%*s", leading_spaces + 7, "ALARM");
+ if (alarms[0].name) {
+ printf(" (");
+ for (i = 0; i < alarm_count; i++) {
+ printf("%s", alarms[i].name);
+ if (i < alarm_count - 1)
+ printf(", ");
+ }
+ printf(")");
}
+}
- if (alarm)
- printf("ALARM ");
+static void print_limits(struct sensor_subfeature_data *limits,
+ int limit_count,
+ struct sensor_subfeature_data *alarms,
+ int alarm_count, int label_size,
+ const char *fmt)
+{
+ int i;
+ int alarms_printed = 0;
+
+ for (i = 0; i < limit_count; i++) {
+ if (!(i & 1)) {
+ if (i)
+ printf("\n%*s", label_size + 10, "");
+ printf("(");
+ } else {
+ printf(", ");
+ }
+ printf(fmt, limits[i].name, limits[i].value,
+ limits[i].unit);
+ if ((i & 1) || i == limit_count - 1) {
+ printf(")");
+ if (i < 2 && alarm_count) {
+ print_alarms(alarms, alarm_count,
+ (i & 1) ? 0 : 16);
+ alarms_printed = 1;
+ }
+ }
+ }
+ if (alarm_count && !alarms_printed)
+ print_alarms(alarms, alarm_count, 32);
}
+static void get_sensor_limit_data(const sensors_chip_name *name,
+ const sensors_feature *feature,
+ const struct sensor_subfeature_list *sfl,
+ struct sensor_subfeature_data *limits,
+ int max_limits,
+ int *num_limits,
+ struct sensor_subfeature_data *alarms,
+ int max_alarms,
+ int *num_alarms)
+{
+ const sensors_subfeature *sf;
+
+ for (; sfl->subfeature >= 0; sfl++) {
+ sf = sensors_get_subfeature(name, feature, sfl->subfeature);
+ if (sf) {
+ if (sfl->alarm) {
+ /*
+ * Only queue alarm subfeatures if the alarm
+ * is active, and don't store the alarm value
+ * (it is implied to be active if queued).
+ */
+ if (get_value(name, sf)) {
+ if (*num_alarms >= max_alarms) {
+ fprintf(stderr,
+ "Not enough alarm buffers (%d)\n",
+ max_alarms);
+ kill(0, SIGABRT);
+ }
+ alarms[*num_alarms].name = sfl->name;
+ (*num_alarms)++;
+ }
+ } else {
+ /*
+ * Always queue limit subfeatures with their value.
+ */
+ if (*num_limits >= max_limits) {
+ fprintf(stderr,
+ "Not enough limit buffers (%d)\n",
+ max_limits);
+ kill(0, SIGABRT);
+ }
+ limits[*num_limits].value = get_value(name, sf);
+ limits[*num_limits].name = sfl->name;
+ (*num_limits)++;
+ }
+ if (sfl->exists) {
+ get_sensor_limit_data(name, feature, sfl->exists,
+ limits, max_limits, num_limits,
+ alarms, max_alarms, num_alarms);
+ }
+ } else if (sfl->nexists)
+ get_sensor_limit_data(name, feature, sfl->nexists,
+ limits, max_limits, num_limits,
+ alarms, max_alarms, num_alarms);
+ }
+}
+
+static const struct sensor_subfeature_list temp_alarms[] = {
+ { SENSORS_SUBFEATURE_TEMP_LCRIT_ALARM, NULL, NULL, 1, "LCRIT" },
+ { SENSORS_SUBFEATURE_TEMP_MIN_ALARM, NULL, NULL, 1, "LOW" },
+ { SENSORS_SUBFEATURE_TEMP_MAX_ALARM, NULL, NULL, 1, "HIGH" },
+ { SENSORS_SUBFEATURE_TEMP_CRIT_ALARM, NULL, NULL, 1, "CRIT" },
+ { SENSORS_SUBFEATURE_TEMP_EMERGENCY_ALARM, NULL, NULL, 1, "EMERGENCY" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list temp_max_sensors[] = {
+ { SENSORS_SUBFEATURE_TEMP_MAX_HYST, NULL, NULL, 0, "hyst" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list temp_crit_sensors[] = {
+ { SENSORS_SUBFEATURE_TEMP_CRIT_HYST, NULL, NULL, 0, "crit hyst" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list temp_emergency_sensors[] = {
+ { SENSORS_SUBFEATURE_TEMP_EMERGENCY_HYST, NULL, NULL, 0,
+ "emerg hyst" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list temp_sensors[] = {
+ { SENSORS_SUBFEATURE_TEMP_ALARM, NULL, temp_alarms, 1, NULL },
+ { SENSORS_SUBFEATURE_TEMP_MIN, NULL, NULL, 0, "low" },
+ { SENSORS_SUBFEATURE_TEMP_MAX, temp_max_sensors, NULL, 0, "high" },
+ { SENSORS_SUBFEATURE_TEMP_LCRIT, NULL, NULL, 0, "crit low" },
+ { SENSORS_SUBFEATURE_TEMP_CRIT, temp_crit_sensors, NULL, 0, "crit" },
+ { SENSORS_SUBFEATURE_TEMP_EMERGENCY, temp_emergency_sensors, NULL, 0,
+ "emerg" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
static void print_chip_temp(const sensors_chip_name *name,
const sensors_feature *feature,
int label_size)
{
- const sensors_subfeature *sf, *sfmin, *sfmax, *sfcrit, *sfhyst;
- double val, limit1, limit2;
- const char *s1, *s2;
- int alarm, crit_displayed = 0;
+ struct sensor_subfeature_data sensors[8];
+ struct sensor_subfeature_data alarms[5];
+ int sensor_count, alarm_count;
+ const sensors_subfeature *sf;
+ double val;
char *label;
+ int i;
if (!(label = sensors_get_label(name, feature))) {
fprintf(stderr, "ERROR: Can't get label of feature %s!\n",
@@ -168,80 +291,6 @@
free(label);
sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_ALARM);
- alarm = sf && get_value(name, sf);
-
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_MIN);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_MAX);
- sfcrit = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT);
- if (sfmax) {
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_MAX_ALARM);
- if (sf && get_value(name, sf))
- alarm |= 1;
-
- if (sfmin) {
- limit1 = get_value(name, sfmin);
- s1 = "low";
- limit2 = get_value(name, sfmax);
- s2 = "high";
-
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_MIN_ALARM);
- if (sf && get_value(name, sf))
- alarm |= 1;
- } else {
- limit1 = get_value(name, sfmax);
- s1 = "high";
-
- sfhyst = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_MAX_HYST);
- if (sfhyst) {
- limit2 = get_value(name, sfhyst);
- s2 = "hyst";
- } else if (sfcrit) {
- limit2 = get_value(name, sfcrit);
- s2 = "crit";
-
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT_ALARM);
- if (sf && get_value(name, sf))
- alarm |= 1;
- crit_displayed = 1;
- } else {
- limit2 = 0;
- s2 = NULL;
- }
- }
- } else if (sfcrit) {
- limit1 = get_value(name, sfcrit);
- s1 = "crit";
-
- sfhyst = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT_HYST);
- if (sfhyst) {
- limit2 = get_value(name, sfhyst);
- s2 = "hyst";
- } else {
- limit2 = 0;
- s2 = NULL;
- }
-
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT_ALARM);
- if (sf && get_value(name, sf))
- alarm |= 1;
- crit_displayed = 1;
- } else {
- limit1 = limit2 = 0;
- s1 = s2 = NULL;
- }
-
-
- sf = sensors_get_subfeature(name, feature,
SENSORS_SUBFEATURE_TEMP_FAULT);
if (sf && get_value(name, sf)) {
printf(" FAULT ");
@@ -256,30 +305,21 @@
} else
printf(" N/A ");
}
- print_temp_limits(limit1, limit2, s1, s2, alarm);
- if (!crit_displayed && sfcrit) {
- limit1 = get_value(name, sfcrit);
- s1 = "crit";
+ sensor_count = alarm_count = 0;
+ get_sensor_limit_data(name, feature, temp_sensors,
+ sensors, 8, &sensor_count,
+ alarms, 5, &alarm_count);
- sfhyst = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT_HYST);
- if (sfhyst) {
- limit2 = get_value(name, sfhyst);
- s2 = "hyst";
- } else {
- limit2 = 0;
- s2 = NULL;
- }
+ for (i = 0; i < sensor_count; i++) {
+ if (fahrenheit)
+ sensors[i].value = deg_ctof(sensors[i].value);
+ sensors[i].unit = degstr;
+ }
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_TEMP_CRIT_ALARM);
- alarm = sf && get_value(name, sf);
+ print_limits(sensors, sensor_count, alarms, alarm_count, label_size,
+ "%-4s = %+5.1f%s");
- printf("\n%*s", label_size + 10, "");
- print_temp_limits(limit1, limit2, s1, s2, alarm);
- }
-
/* print out temperature sensor info */
sf = sensors_get_subfeature(name, feature,
SENSORS_SUBFEATURE_TEMP_TYPE);
@@ -302,13 +342,33 @@
printf("\n");
}
+static const struct sensor_subfeature_list voltage_alarms[] = {
+ { SENSORS_SUBFEATURE_IN_LCRIT_ALARM, NULL, NULL, 1, "LCRIT" },
+ { SENSORS_SUBFEATURE_IN_MIN_ALARM, NULL, NULL, 1, "MIN" },
+ { SENSORS_SUBFEATURE_IN_MAX_ALARM, NULL, NULL, 1, "MAX" },
+ { SENSORS_SUBFEATURE_IN_CRIT_ALARM, NULL, NULL, 1, "CRIT" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list voltage_sensors[] = {
+ { SENSORS_SUBFEATURE_IN_ALARM, NULL, voltage_alarms, 1, NULL },
+ { SENSORS_SUBFEATURE_IN_LCRIT, NULL, NULL, 0, "crit min" },
+ { SENSORS_SUBFEATURE_IN_MIN, NULL, NULL, 0, "min" },
+ { SENSORS_SUBFEATURE_IN_MAX, NULL, NULL, 0, "max" },
+ { SENSORS_SUBFEATURE_IN_CRIT, NULL, NULL, 0, "crit max" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
static void print_chip_in(const sensors_chip_name *name,
const sensors_feature *feature,
int label_size)
{
- const sensors_subfeature *sf, *sfmin, *sfmax;
- double val, alarm_max, alarm_min;
+ const sensors_subfeature *sf;
char *label;
+ struct sensor_subfeature_data sensors[4];
+ struct sensor_subfeature_data alarms[4];
+ int sensor_count, alarm_count;
+ double val;
if (!(label = sensors_get_label(name, feature))) {
fprintf(stderr, "ERROR: Can't get label of feature %s!\n",
@@ -321,50 +381,18 @@
sf = sensors_get_subfeature(name, feature,
SENSORS_SUBFEATURE_IN_INPUT);
if (sf && get_input_value(name, sf, &val) == 0)
- printf("%+6.2f V", val);
+ printf("%+6.2f V ", val);
else
- printf(" N/A");
+ printf(" N/A ");
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_IN_MIN);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_IN_MAX);
- if (sfmin && sfmax)
- printf(" (min = %+6.2f V, max = %+6.2f V)",
- get_value(name, sfmin),
- get_value(name, sfmax));
- else if (sfmin)
- printf(" (min = %+6.2f V)",
- get_value(name, sfmin));
- else if (sfmax)
- printf(" (max = %+6.2f V)",
- get_value(name, sfmax));
+ sensor_count = alarm_count = 0;
+ get_sensor_limit_data(name, feature, voltage_sensors,
+ sensors, 4, &sensor_count,
+ alarms, 4, &alarm_count);
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_IN_ALARM);
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_IN_MIN_ALARM);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_IN_MAX_ALARM);
- if (sfmin || sfmax) {
- alarm_max = sfmax ? get_value(name, sfmax) : 0;
- alarm_min = sfmin ? get_value(name, sfmin) : 0;
+ print_limits(sensors, sensor_count, alarms, alarm_count, label_size,
+ "%s = %+6.2f V");
- if (alarm_min || alarm_max) {
- printf(" ALARM (");
-
- if (alarm_min)
- printf("MIN");
- if (alarm_max)
- printf("%sMAX", (alarm_min) ? ", " : "");
-
- printf(")");
- }
- } else if (sf) {
- printf(" %s",
- get_value(name, sf) ? "ALARM" : "");
- }
-
printf("\n");
}
@@ -441,6 +469,11 @@
};
struct scale_table *scale = prefix_scales;
+ if (abs_value == 0) {
+ *prefixstr = "";
+ return;
+ }
+
while (scale->upper_bound && abs_value > scale->upper_bound) {
divisor = scale->upper_bound;
scale++;
@@ -450,15 +483,49 @@
*prefixstr = scale->unit;
}
+static const struct sensor_subfeature_list power_alarms[] = {
+ { SENSORS_SUBFEATURE_POWER_CAP_ALARM, NULL, NULL, 1, "CAP" },
+ { SENSORS_SUBFEATURE_POWER_MAX_ALARM, NULL, NULL, 1, "MAX" },
+ { SENSORS_SUBFEATURE_POWER_CRIT_ALARM, NULL, NULL, 1, "CRIT" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list power_max[] = {
+ { SENSORS_SUBFEATURE_POWER_MAX, NULL, NULL, 0, "max" },
+ { SENSORS_SUBFEATURE_POWER_CRIT, NULL, NULL, 0, "crit" },
+ { SENSORS_SUBFEATURE_POWER_CAP, NULL, NULL, 0, "cap" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list power_inst_sensors[] = {
+ { SENSORS_SUBFEATURE_POWER_ALARM, NULL, power_alarms, 1, NULL },
+ { SENSORS_SUBFEATURE_POWER_INPUT_LOWEST, NULL, NULL, 0, "lowest" },
+ { SENSORS_SUBFEATURE_POWER_INPUT_HIGHEST, power_max, power_max, 0,
+ "highest" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list power_avg_sensors[] = {
+ { SENSORS_SUBFEATURE_POWER_ALARM, NULL, NULL, 1, NULL },
+ { SENSORS_SUBFEATURE_POWER_AVERAGE_LOWEST, NULL, NULL, 0, "lowest" },
+ { SENSORS_SUBFEATURE_POWER_AVERAGE_HIGHEST, NULL, NULL, 0, "highest" },
+ { SENSORS_SUBFEATURE_POWER_AVERAGE_INTERVAL, power_max, power_max, 0,
+ "interval" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
static void print_chip_power(const sensors_chip_name *name,
const sensors_feature *feature,
int label_size)
{
double val;
- int need_space = 0;
- const sensors_subfeature *sf, *sfmin, *sfmax, *sfint;
+ const sensors_subfeature *sf;
+ struct sensor_subfeature_data sensors[6];
+ struct sensor_subfeature_data alarms[3];
+ int sensor_count, alarm_count;
char *label;
const char *unit;
+ int i;
if (!(label = sensors_get_label(name, feature))) {
fprintf(stderr, "ERROR: Can't get label of feature %s!\n",
@@ -468,60 +535,30 @@
print_label(label, label_size);
free(label);
+ sensor_count = alarm_count = 0;
+
/* Power sensors come in 2 flavors: instantaneous and averaged.
To keep things simple, we assume that each sensor only implements
one flavor. */
sf = sensors_get_subfeature(name, feature,
SENSORS_SUBFEATURE_POWER_INPUT);
- if (sf) {
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_INPUT_HIGHEST);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_INPUT_LOWEST);
- sfint = NULL;
- } else {
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_AVERAGE);
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_AVERAGE_HIGHEST);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_AVERAGE_LOWEST);
- sfint = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_POWER_AVERAGE_INTERVAL);
- }
+ get_sensor_limit_data(name, feature,
+ sf ? power_inst_sensors : power_avg_sensors,
+ sensors, 6, &sensor_count,
+ alarms, 3, &alarm_count);
if (sf && get_input_value(name, sf, &val) == 0) {
scale_value(&val, &unit);
- printf("%6.2f %sW", val, unit);
+ printf("%6.2f %sW ", val, unit);
} else
- printf(" N/A");
+ printf(" N/A ");
- if (sfmin || sfmax || sfint) {
- printf(" (");
+ for (i = 0; i < sensor_count; i++)
+ scale_value(&sensors[i].value, &sensors[i].unit);
- if (sfmin) {
- val = get_value(name, sfmin);
- scale_value(&val, &unit);
- printf("min = %6.2f %sW", val, unit);
- need_space = 1;
- }
+ print_limits(sensors, sensor_count, alarms, alarm_count,
+ label_size, "%s = %6.2f %sW");
- if (sfmax) {
- val = get_value(name, sfmax);
- scale_value(&val, &unit);
- printf("%smax = %6.2f %sW", (need_space ? ", " : ""),
- val, unit);
- need_space = 1;
- }
-
- if (sfint) {
- printf("%sinterval = %6.2f s", (need_space ? ", " : ""),
- get_value(name, sfint));
- need_space = 1;
- }
- printf(")");
- }
-
printf("\n");
}
@@ -595,13 +632,33 @@
free(label);
}
+static const struct sensor_subfeature_list current_alarms[] = {
+ { SENSORS_SUBFEATURE_CURR_LCRIT_ALARM, NULL, NULL, 1, "LCRIT" },
+ { SENSORS_SUBFEATURE_CURR_MIN_ALARM, NULL, NULL, 1, "MIN" },
+ { SENSORS_SUBFEATURE_CURR_MAX_ALARM, NULL, NULL, 1, "MAX" },
+ { SENSORS_SUBFEATURE_CURR_CRIT_ALARM, NULL, NULL, 1, "CRIT" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
+static const struct sensor_subfeature_list current_sensors[] = {
+ { SENSORS_SUBFEATURE_CURR_ALARM, NULL, current_alarms, 1, NULL },
+ { SENSORS_SUBFEATURE_CURR_LCRIT, NULL, NULL, 0, "crit min" },
+ { SENSORS_SUBFEATURE_CURR_MIN, NULL, NULL, 0, "min" },
+ { SENSORS_SUBFEATURE_CURR_MAX, NULL, NULL, 0, "max" },
+ { SENSORS_SUBFEATURE_CURR_CRIT, NULL, NULL, 0, "crit max" },
+ { -1, NULL, NULL, 0, NULL }
+};
+
static void print_chip_curr(const sensors_chip_name *name,
const sensors_feature *feature,
int label_size)
{
- const sensors_subfeature *sf, *sfmin, *sfmax;
- double alarm_max, alarm_min, val;
+ const sensors_subfeature *sf;
+ double val;
char *label;
+ struct sensor_subfeature_data sensors[4];
+ struct sensor_subfeature_data alarms[4];
+ int sensor_count, alarm_count;
if (!(label = sensors_get_label(name, feature))) {
fprintf(stderr, "ERROR: Can't get label of feature %s!\n",
@@ -614,50 +671,18 @@
sf = sensors_get_subfeature(name, feature,
SENSORS_SUBFEATURE_CURR_INPUT);
if (sf && get_input_value(name, sf, &val) == 0)
- printf("%+6.2f A", val);
+ printf("%+6.2f A ", val);
else
- printf(" N/A");
+ printf(" N/A ");
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_CURR_MIN);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_CURR_MAX);
- if (sfmin && sfmax)
- printf(" (min = %+6.2f A, max = %+6.2f A)",
- get_value(name, sfmin),
- get_value(name, sfmax));
- else if (sfmin)
- printf(" (min = %+6.2f A)",
- get_value(name, sfmin));
- else if (sfmax)
- printf(" (max = %+6.2f A)",
- get_value(name, sfmax));
+ sensor_count = alarm_count = 0;
+ get_sensor_limit_data(name, feature, current_sensors,
+ sensors, 4, &sensor_count,
+ alarms, 4, &alarm_count);
- sf = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_CURR_ALARM);
- sfmin = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_CURR_MIN_ALARM);
- sfmax = sensors_get_subfeature(name, feature,
- SENSORS_SUBFEATURE_CURR_MAX_ALARM);
- if (sfmin || sfmax) {
- alarm_max = sfmax ? get_value(name, sfmax) : 0;
- alarm_min = sfmin ? get_value(name, sfmin) : 0;
+ print_limits(sensors, sensor_count, alarms, alarm_count, label_size,
+ "%s = %+6.2f A");
- if (alarm_min || alarm_max) {
- printf(" ALARM (");
-
- if (alarm_min)
- printf("MIN");
- if (alarm_max)
- printf("%sMAX", (alarm_min) ? ", " : "");
-
- printf(")");
- }
- } else if (sf) {
- printf(" %s",
- get_value(name, sf) ? "ALARM" : "");
- }
-
printf("\n");
}
Index: prog/sensors/chips.h
===================================================================
--- prog/sensors/chips.h (revision 5939)
+++ prog/sensors/chips.h (working copy)
@@ -24,6 +24,32 @@
#include "lib/sensors.h"
+/*
+ * Retrieved limits
+ */
+struct sensor_subfeature_data {
+ double value; /* Subfeature value. Not used for alarms. */
+ const char *name; /* Subfeature name */
+ const char *unit; /* Unit to be displayed for this subfeature.
+ This field is optional. */
+};
+
+/*
+ * Subfeature data structure. Used to create a table of supported subfeatures
+ * for a given feature.
+ */
+struct sensor_subfeature_list {
+ int subfeature; /* Limit we are looking for */
+ const struct sensor_subfeature_list *exists;
+ /* Complementary subfeatures to be displayed
+ if subfeature exists */
+ const struct sensor_subfeature_list *nexists;
+ /* Alternative subfeatures to be displayed
+ if subfeature does not exist */
+ int alarm; /* true if this is an alarm */
+ const char *name; /* subfeature name to be printed */
+};
+
void print_chip_raw(const sensors_chip_name *name);
void print_chip(const sensors_chip_name *name);
[-- Attachment #2: sensors.log --]
[-- Type: text/plain, Size: 24579 bytes --]
max6696-i2c-1-19
Adapter: Phalanx i2c channel 1
temp1: +22.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
max6696-i2c-100-18
Adapter: SMBus I801 adapter at 5080
temp1: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +81.9 C (low = -55.0 C, high = +70.0 C) ALARM (HIGH)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: +23.5 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
bmr453-i2c-0-12
Adapter: Phalanx i2c channel 0
vin: +53.75 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +12.00 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +28.0 C (low = -40.0 C, high = +125.0 C)
(crit low = -50.0 C, crit = +135.0 C)
iout1: +5.25 A (max = +39.00 A, crit max = +39.00 A)
max6696-i2c-100-19
Adapter: SMBus I801 adapter at 5080
temp1: +21.5 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: +21.1 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-0-5c
Adapter: Phalanx i2c channel 0
vin: +12.06 V (crit min = +8.00 V, min = +10.50 V)
(max = +13.20 V, crit max = +14.00 V)
vout1: +1.09 V (crit min = +0.97 V, min = +1.00 V)
(max = +1.10 V, crit max = +1.13 V)
vout2: +1.50 V (crit min = +1.39 V, min = +1.41 V)
(max = +1.59 V, crit max = +1.61 V)
vout3: +1.01 V (crit min = +0.93 V, min = +0.95 V)
(max = +1.05 V, crit max = +1.07 V)
vout4: +1.84 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.94 V, crit max = +1.98 V)
vout5: +1.23 V (crit min = +1.11 V, min = +1.14 V)
(max = +1.26 V, crit max = +1.29 V)
vout6: +1.02 V (crit min = +0.93 V, min = +0.95 V)
(max = +1.05 V, crit max = +1.07 V)
vout7: +1.02 V (crit min = +0.93 V, min = +0.95 V)
(max = +1.05 V, crit max = +1.07 V)
vout8: +0.90 V (crit min = +0.83 V, min = +0.85 V)
(max = +0.94 V, crit max = +0.97 V)
temp1: +28.8 C (low = -5.0 C, high = +95.0 C)
(crit low = -5.0 C, crit = +100.0 C)
ltc4261-i2c-0-10
Adapter: Phalanx i2c channel 0
in1: +0.00 V
Vin: +49.16 V
Cin: +4.44 A
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +25.0 C (high = +74.0 C, crit = +94.0 C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +25.0 C (high = +74.0 C, crit = +94.0 C)
coretemp-isa-0002
Adapter: ISA adapter
Core 2: +26.0 C (high = +74.0 C, crit = +94.0 C)
coretemp-isa-0003
Adapter: ISA adapter
Core 3: +25.0 C (high = +74.0 C, crit = +94.0 C)
lm75-i2c-70-48
Adapter: i2c-2-mux (chan_id 0)
temp1: +19.5 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-71-49
Adapter: i2c-2-mux (chan_id 0)
temp1: +19.5 C (high = +80.0 C, hyst = +75.0 C)
jc42-i2c-100-1a
Adapter: SMBus I801 adapter at 5080
temp1: +27.2 C (low = +0.0 C, high = +0.0 C) ALARM (HIGH, CRIT)
(hyst = +0.0 C, crit = +0.0 C)
(crit hyst = +0.0 C)
jc42-i2c-100-1b
Adapter: SMBus I801 adapter at 5080
temp1: +26.5 C (low = +0.0 C, high = +0.0 C) ALARM (HIGH, CRIT)
(hyst = +0.0 C, crit = +0.0 C)
(crit hyst = +0.0 C)
lineage_pem-i2c-60-44
Adapter: i2c-55-mux (chan_id 0)
in1: +54.16 V
in2: +51.00 V
fan1: N/A
temp1: +64.0 C (high = +97.0 C, crit = +107.0 C)
power1: 887.00 W
curr1: +15.00 A
ssrft-i2c-68-74
Adapter: i2c-57-mux (chan_id 0)
in0: +54.00 V
fan1: 4026 RPM (min = 700 RPM)
fan2: 4092 RPM (min = 700 RPM)
fan3: 4092 RPM (min = 700 RPM)
fan4: 4092 RPM (min = 700 RPM)
fan5: 4092 RPM (min = 700 RPM)
fan6: 4092 RPM (min = 700 RPM)
temp1: +24.0 C (high = +35.0 C, crit = +40.0 C)
curr1: +5.50 A
lineage_pem-i2c-61-45
Adapter: i2c-55-mux (chan_id 0)
in1: +0.00 V ALARM
in2: +0.00 V ALARM
fan1: N/A
temp1: +35.0 C (high = +97.0 C, crit = +107.0 C)
power1: 0.00 W
curr1: +0.00 A
ssrft-i2c-69-74
Adapter: i2c-58-mux (chan_id 0)
in0: +54.25 V
fan1: 4290 RPM (min = 700 RPM)
fan2: 4290 RPM (min = 700 RPM)
fan3: 4356 RPM (min = 700 RPM)
fan4: 4224 RPM (min = 700 RPM)
fan5: 4224 RPM (min = 700 RPM)
fan6: 4290 RPM (min = 700 RPM)
temp1: +24.0 C (high = +35.0 C, crit = +40.0 C)
curr1: +4.00 A
ltc4261-i2c-12-10
Adapter: Spanky i2c channel 12
in1: +0.00 V
Vin: +54.11 V
Cin: +1.19 A
max6696-i2c-12-18
Adapter: Spanky i2c channel 12
temp1: +22.6 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-12-5c
Adapter: Spanky i2c channel 12
vin: +12.05 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.02 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +2.52 V (crit min = +2.25 V, min = +2.32 V)
(max = +2.67 V, crit max = +2.75 V)
vout4: +1.80 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +1.50 V (crit min = +1.35 V, min = +1.40 V)
(max = +1.60 V, crit max = +1.65 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +22.9 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-13-12
Adapter: Spanky i2c channel 13
vin: +53.75 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +12.01 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +17.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +1.12 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-13-18
Adapter: Spanky i2c channel 13
temp1: +25.5 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +24.1 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc4261-i2c-18-10
Adapter: Spanky i2c channel 18
in1: +0.00 V
Vin: +53.94 V
Cin: +1.25 A
max6696-i2c-18-18
Adapter: Spanky i2c channel 18
temp1: +23.2 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-18-5c
Adapter: Spanky i2c channel 18
vin: +12.03 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.00 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +2.52 V (crit min = +2.25 V, min = +2.32 V)
(max = +2.67 V, crit max = +2.75 V)
vout4: +1.80 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +1.50 V (crit min = +1.35 V, min = +1.40 V)
(max = +1.60 V, crit max = +1.65 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +23.5 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-19-12
Adapter: Spanky i2c channel 19
vin: +54.25 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +11.99 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +27.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +1.12 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-19-18
Adapter: Spanky i2c channel 19
temp1: +25.0 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +22.6 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc4261-i2c-24-10
Adapter: Spanky i2c channel 24
in1: +0.00 V
Vin: +54.17 V
Cin: +0.31 A
max6696-i2c-24-18
Adapter: Spanky i2c channel 24
temp1: +22.9 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-24-5c
Adapter: Spanky i2c channel 24
vin: +12.03 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.01 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout4: +1.80 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +27.8 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-25-12
Adapter: Spanky i2c channel 25
vin: +53.75 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +11.94 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +29.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +0.75 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-25-18
Adapter: Spanky i2c channel 25
temp1: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +23.8 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc4261-i2c-30-10
Adapter: Spanky i2c channel 30
in1: +0.00 V
Vin: +54.11 V
Cin: +1.25 A
max6696-i2c-30-18
Adapter: Spanky i2c channel 30
temp1: +22.0 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-30-5c
Adapter: Spanky i2c channel 30
vin: +12.05 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.02 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout4: +1.79 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +27.5 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-31-12
Adapter: Spanky i2c channel 31
vin: +53.50 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +11.96 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +27.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +0.94 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-31-18
Adapter: Spanky i2c channel 31
temp1: +23.4 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +25.4 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc4261-i2c-36-10
Adapter: Spanky i2c channel 36
in1: +0.00 V
Vin: +54.00 V
Cin: +0.00 A
max6696-i2c-36-18
Adapter: Spanky i2c channel 36
temp1: +22.6 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-36-5c
Adapter: Spanky i2c channel 36
vin: +12.05 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.01 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout4: +1.80 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +27.7 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-37-12
Adapter: Spanky i2c channel 37
vin: +53.62 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +11.96 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +25.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +0.38 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-37-18
Adapter: Spanky i2c channel 37
temp1: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc4261-i2c-42-10
Adapter: Spanky i2c channel 42
in1: +0.00 V
Vin: +54.11 V
Cin: +0.00 A
max6696-i2c-42-18
Adapter: Spanky i2c channel 42
temp1: +21.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
ltc2978-i2c-42-5c
Adapter: Spanky i2c channel 42
vin: +12.05 V (crit min = +0.00 V, min = +0.00 V)
(max = +14.00 V, crit max = +15.00 V)
vout1: +3.30 V (crit min = +2.97 V, min = +3.07 V)
(max = +3.53 V, crit max = +3.63 V)
vout2: +3.01 V (crit min = +2.70 V, min = +2.79 V)
(max = +3.21 V, crit max = +3.30 V)
vout3: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout4: +1.80 V (crit min = +1.62 V, min = +1.67 V)
(max = +1.93 V, crit max = +1.98 V)
vout5: +0.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout6: +1.20 V (crit min = +1.08 V, min = +1.11 V)
(max = +1.28 V, crit max = +1.32 V)
vout7: +1.00 V (crit min = +0.90 V, min = +0.93 V)
(max = +1.07 V, crit max = +1.10 V)
vout8: +0.90 V (crit min = +0.81 V, min = +0.84 V)
(max = +0.96 V, crit max = +0.99 V)
temp1: +27.6 C (low = +0.0 C, high = +75.0 C)
(crit low = -10.0 C, crit = +100.0 C)
bmr454-i2c-43-12
Adapter: Spanky i2c channel 43
vin: +53.75 V (crit min = +0.00 V, min = +0.00 V)
(max = +80.00 V, crit max = +85.00 V)
vout1: +12.00 V (crit min = +0.00 V, min = +0.00 V)
(max = +15.00 V, crit max = +15.60 V)
temp1: +26.0 C (low = -40.0 C, high = +115.0 C)
(crit low = -50.0 C, crit = +125.0 C)
iout1: +0.38 A (max = +25.00 A, crit max = +25.00 A)
max6696-i2c-43-18
Adapter: Spanky i2c channel 43
temp1: +23.1 C (low = -55.0 C, high = +70.0 C)
(crit = +70.0 C, crit hyst = +60.0 C)
(emerg = +90.0 C, emerg hyst = +80.0 C)
temp2: +23.2 C (low = -55.0 C, high = +70.0 C)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
temp3: FAULT (low = -55.0 C, high = +70.0 C) ALARM (LOW)
(crit = +90.0 C, crit hyst = +80.0 C)
(emerg = +120.0 C, emerg hyst = +110.0 C)
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2011-03-16 4:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-16 4:20 Guenter Roeck [this message]
2011-03-16 10:50 ` [lm-sensors] [PATCH v2] sensors: Add support for additional Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110316042006.GA25075@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.