From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 16 Mar 2011 15:20:22 +0000 Subject: Re: [lm-sensors] [PATCH v5 00/11] hwmon: (w83627ehf) Add support Message-Id: <20110316152022.GC28824@ericsson.com> List-Id: References: <1299261486-15190-1-git-send-email-guenter.roeck@ericsson.com> In-Reply-To: <1299261486-15190-1-git-send-email-guenter.roeck@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Wed, Mar 16, 2011 at 05:49:20AM -0400, Michiel wrote: > Hi, >=20 > I installed the stand alone module you created for the nct6775f and > basic functionality seems OK. Although the voltage sensor readings seem > a bit nonsensical. This is on an ASRock 870iCafe motherboard. > ( http://www.asrock.com/mb/overview.asp?Model=870iCafe ) >=20 Thanks for testing. The voltage values are not surprising; you'll have to figure out actual vol= tages and add scaling factors to sensors3.conf. > It has 2 4pin fan connectors and 1 3pin connector. I'm still trying to > configure those for use with fancontrol. But I'm not there yet.. >=20 > Thanks for all time and hard work you punt in to lm-sensors ! :-) > =20 > > k10temp-pci-00c3 > > Adapter: PCI adapter > > temp1: +17.5=EF=BF=BD=EF=BF=BDC (high =3D +70.0=EF=BF=BD=EF=BF= =BDC) =20 > >=20 > > nct6775-isa-0290 > > Adapter: ISA adapter > > in0: +0.99 V (min =3D +0.00 V, max =3D +1.74 V) =20 > > in1: +1.85 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in2: +3.41 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in3: +3.41 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in4: +0.06 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in5: +1.67 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in6: +1.70 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in7: +3.44 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > in8: +3.39 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > > fan1: 1095 RPM (min =3D 0 RPM, div =3D 8) ALARM > > fan2: 1095 RPM (min =3D 0 RPM, div =3D 8) ALARM > > fan3: 1180 RPM (min =3D 0 RPM, div =3D 8) ALARM > > SYSTIN: +30.0=EF=BF=BD=EF=BF=BDC (high =3D +0.0=EF=BF=BD=EF=BF= =BDC, hyst =3D +0.0=EF=BF=BD=EF=BF=BDC) ALARM sensor =3D thermistor > > CPUTIN: +26.5=EF=BF=BD=EF=BF=BDC (high =3D +80.0=EF=BF=BD=EF=BF= =BDC, hyst =3D +75.0=EF=BF=BD=EF=BF=BDC) sensor =3D thermistor > > AUXTIN: -12.5=EF=BF=BD=EF=BF=BDC (high =3D +80.0=EF=BF=BD=EF=BF= =BDC, hyst =3D +75.0=EF=BF=BD=EF=BF=BDC) sensor =3D thermistor Must be pretty cold where you live ;). Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors