From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Fri, 18 Mar 2011 04:20:48 +0000 Subject: [lm-sensors] Update on DS1721, DS1631, DS1631A, DS1731 Message-Id: <20110318042048.GA8315@ericsson.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi all, I confirmed that DS1721, DS1631, DS1631A, and DS1731 work with the existing ds1621 driver: DS1721 (2x): ds1621-i2c-5-48 Adapter: i2c-devantech-iss at bus 002 device 034 temp1: +23.5=B0C (low =3D +10.0=B0C, high =3D +70.0=B0C) ds1621-i2c-5-49 Adapter: i2c-devantech-iss at bus 002 device 034 temp1: +23.5=B0C (low =3D +10.0=B0C, high =3D +70.0=B0C) DS1631: ds1621-i2c-5-4a Adapter: i2c-devantech-iss at bus 002 device 034 temp1: +23.0=B0C (low =3D +10.0=B0C, high =3D +70.0=B0C) DS1631A: ds1621-i2c-5-4b Adapter: i2c-devantech-iss at bus 002 device 034 temp1: +23.0=B0C (low =3D +10.0=B0C, high =3D +70.0=B0C) DS1731: ds1621-i2c-5-4c Adapter: i2c-devantech-iss at bus 002 device 034 temp1: +23.5=B0C (low =3D +10.0=B0C, high =3D +70.0=B0C) Output from sensors-detect: Driver `ds1621': * Bus `i2c-devantech-iss at bus 002 device 034' Busdriver `i2c_devantech_iss', I2C address 0x48 Chip `Dallas Semiconductor DS1621/DS1631' (confidence: 3) * Bus `i2c-devantech-iss at bus 002 device 034' Busdriver `i2c_devantech_iss', I2C address 0x49 Chip `Dallas Semiconductor DS1621/DS1631' (confidence: 3) * Bus `i2c-devantech-iss at bus 002 device 034' Busdriver `i2c_devantech_iss', I2C address 0x4a Chip `Dallas Semiconductor DS1621/DS1631' (confidence: 3) * Bus `i2c-devantech-iss at bus 002 device 034' Busdriver `i2c_devantech_iss', I2C address 0x4b Chip `Dallas Semiconductor DS1621/DS1631' (confidence: 3) * Bus `i2c-devantech-iss at bus 002 device 034' Busdriver `i2c_devantech_iss', I2C address 0x4c Chip `Dallas Semiconductor DS1621/DS1631' (confidence: 3) The chips still support register 0xee, even though that is not documented in the datasheets. Auto-detection and sensors-detect may or may not work depending on chip configuration (it always works after power-up). Explicit device instantiation always works. I'll update the list of supported devices to reflect this information. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors