CPUv6K (ARM1176) and wfi()

[jamie@jamieiles.com (Jamie Iles)]

On Tue, Mar 29, 2011 at 10:07:47AM +0100, Will Deacon wrote:
> > On Mon, Mar 28, 2011 at 1:25 PM, Jamie Iles <jamie@jamieiles.com> wrote:
> > > Hi Catalin, Will,
> > >
> > > I'm respinning some PM patches for my platform (ARM1176JZ-S) and looking
> > > at arch/arm/include/asm/system.h, for CPU_32v6K wfi() uses the "wfi"
> > > instruction, but when I use this on my system the instruction returns
> > > immediately. ?Replacing this with:
> > >
> > > ? ? ? ?asm volatile("mcr ? p15, 0, %0, c7, c0, 4\n" :: "r"(0));
> > >
> > > makes everything work properly. ?The ARM1176 TRM doesn't mention the wfi
> > > instruction afaict but does say to use the cp15 instruction in section
> > > 10.2.2 (Standby mode). ?It doesn't look to me that the SEV or WFE
> > > instructions are implemented on ARM1176 so I'm guessing that these are
> > > only in mpcore?
> > 
> > I think WFI/SEV/WFE are encoded as NOP-synonyms, so they may do
> > nothing on non-multicore platforms; so I think the MCR is the correct
> > mechanism to use for 1176... unless Will or Catalin have better ideas.
> 
> Would using the mcr get in the way of a combined v6/v7 kernel image?
> I notice that the behaviour on A9 is the exact opposite (wfi works, mcr
> is a NOP).

Wouldnet it also be a problem for smp-on-up for a v6K only kernel?  It 
doesn't look like arm11 mpcore supports the cp15 access...

Jamie