From: Alan Cox <alan@linux.intel.com>
To: greg@kroah.com, linux-kernel@vger.kernel.org
Subject: [PATCH 15/18] gma500: pull mrst firmware stuff into its own header
Date: Wed, 30 Mar 2011 10:01:22 +0100 [thread overview]
Message-ID: <20110330090118.5897.137.stgit@localhost.localdomain> (raw)
In-Reply-To: <20110330085539.5897.67919.stgit@localhost.localdomain>
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/staging/gma500/mrst.h | 217 ++++++++++++++++++++++++++++++++++++++
drivers/staging/gma500/psb_drv.h | 197 ----------------------------------
2 files changed, 218 insertions(+), 196 deletions(-)
create mode 100644 drivers/staging/gma500/mrst.h
diff --git a/drivers/staging/gma500/mrst.h b/drivers/staging/gma500/mrst.h
new file mode 100644
index 0000000..5e4aaeb
--- /dev/null
+++ b/drivers/staging/gma500/mrst.h
@@ -0,0 +1,217 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+/* MID device specific descriptors */
+
+struct mrst_vbt {
+ s8 signature[4]; /*4 bytes,"$GCT" */
+ u8 revision;
+ u8 size;
+ u8 checksum;
+ void *mrst_gct;
+} __attribute__ ((packed));
+
+struct mrst_timing_info {
+ u16 pixel_clock;
+ u8 hactive_lo;
+ u8 hblank_lo;
+ u8 hblank_hi:4;
+ u8 hactive_hi:4;
+ u8 vactive_lo;
+ u8 vblank_lo;
+ u8 vblank_hi:4;
+ u8 vactive_hi:4;
+ u8 hsync_offset_lo;
+ u8 hsync_pulse_width_lo;
+ u8 vsync_pulse_width_lo:4;
+ u8 vsync_offset_lo:4;
+ u8 vsync_pulse_width_hi:2;
+ u8 vsync_offset_hi:2;
+ u8 hsync_pulse_width_hi:2;
+ u8 hsync_offset_hi:2;
+ u8 width_mm_lo;
+ u8 height_mm_lo;
+ u8 height_mm_hi:4;
+ u8 width_mm_hi:4;
+ u8 hborder;
+ u8 vborder;
+ u8 unknown0:1;
+ u8 hsync_positive:1;
+ u8 vsync_positive:1;
+ u8 separate_sync:2;
+ u8 stereo:1;
+ u8 unknown6:1;
+ u8 interlaced:1;
+} __attribute__((packed));
+
+struct gct_r10_timing_info {
+ u16 pixel_clock;
+ u32 hactive_lo:8;
+ u32 hactive_hi:4;
+ u32 hblank_lo:8;
+ u32 hblank_hi:4;
+ u32 hsync_offset_lo:8;
+ u16 hsync_offset_hi:2;
+ u16 hsync_pulse_width_lo:8;
+ u16 hsync_pulse_width_hi:2;
+ u16 hsync_positive:1;
+ u16 rsvd_1:3;
+ u8 vactive_lo:8;
+ u16 vactive_hi:4;
+ u16 vblank_lo:8;
+ u16 vblank_hi:4;
+ u16 vsync_offset_lo:4;
+ u16 vsync_offset_hi:2;
+ u16 vsync_pulse_width_lo:4;
+ u16 vsync_pulse_width_hi:2;
+ u16 vsync_positive:1;
+ u16 rsvd_2:3;
+} __attribute__((packed));
+
+struct mrst_panel_descriptor_v1 {
+ u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+ /* 0x61190 if MIPI */
+ u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
+ /* Register 0x61210 */
+ struct mrst_timing_info DTD;/*18 bytes, Standard definition */
+ u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
+ /* Bit 0, Frequency, 15 bits,0 - 32767Hz */
+ /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
+ u16 Panel_MIPI_Display_Descriptor;
+ /*16 bits, Defined as follows: */
+ /* if MIPI, 0x0000 if LVDS */
+ /* Bit 0, Type, 2 bits, */
+ /* 0: Type-1, */
+ /* 1: Type-2, */
+ /* 2: Type-3, */
+ /* 3: Type-4 */
+ /* Bit 2, Pixel Format, 4 bits */
+ /* Bit0: 16bpp (not supported in LNC), */
+ /* Bit1: 18bpp loosely packed, */
+ /* Bit2: 18bpp packed, */
+ /* Bit3: 24bpp */
+ /* Bit 6, Reserved, 2 bits, 00b */
+ /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+ /* Bit 14, Reserved, 2 bits, 00b */
+} __attribute__ ((packed));
+
+struct mrst_panel_descriptor_v2 {
+ u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+ /* 0x61190 if MIPI */
+ u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
+ /* Register 0x61210 */
+ struct mrst_timing_info DTD;/*18 bytes, Standard definition */
+ u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
+ /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
+ u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */
+ /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
+ u16 Panel_MIPI_Display_Descriptor;
+ /*16 bits, Defined as follows: */
+ /* if MIPI, 0x0000 if LVDS */
+ /* Bit 0, Type, 2 bits, */
+ /* 0: Type-1, */
+ /* 1: Type-2, */
+ /* 2: Type-3, */
+ /* 3: Type-4 */
+ /* Bit 2, Pixel Format, 4 bits */
+ /* Bit0: 16bpp (not supported in LNC), */
+ /* Bit1: 18bpp loosely packed, */
+ /* Bit2: 18bpp packed, */
+ /* Bit3: 24bpp */
+ /* Bit 6, Reserved, 2 bits, 00b */
+ /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+ /* Bit 14, Reserved, 2 bits, 00b */
+} __attribute__ ((packed));
+
+union mrst_panel_rx {
+ struct{
+ u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
+ /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
+ u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
+ /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
+ u16 SupportedVideoTransferMode:2; /*0: Non-burst only */
+ /* 1: Burst and non-burst */
+ /* 2/3: Reserved */
+ u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
+ u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
+ u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
+ u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
+ u16 Rsvd:5;/*5 bits,00000b */
+ } panelrx;
+ u16 panel_receiver;
+} __attribute__ ((packed));
+
+struct mrst_gct_v1 {
+ union{ /*8 bits,Defined as follows: */
+ struct {
+ u8 PanelType:4; /*4 bits, Bit field for panels*/
+ /* 0 - 3: 0 = LVDS, 1 = MIPI*/
+ /*2 bits,Specifies which of the*/
+ u8 BootPanelIndex:2;
+ /* 4 panels to use by default*/
+ u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+ /* the 4 MIPI DSI receivers to use*/
+ } PD;
+ u8 PanelDescriptor;
+ };
+ struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
+ union mrst_panel_rx panelrx[4]; /* panel receivers*/
+} __attribute__ ((packed));
+
+struct mrst_gct_v2 {
+ union{ /*8 bits,Defined as follows: */
+ struct {
+ u8 PanelType:4; /*4 bits, Bit field for panels*/
+ /* 0 - 3: 0 = LVDS, 1 = MIPI*/
+ /*2 bits,Specifies which of the*/
+ u8 BootPanelIndex:2;
+ /* 4 panels to use by default*/
+ u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+ /* the 4 MIPI DSI receivers to use*/
+ } PD;
+ u8 PanelDescriptor;
+ };
+ struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
+ union mrst_panel_rx panelrx[4]; /* panel receivers*/
+} __attribute__ ((packed));
+
+struct mrst_gct_data {
+ u8 bpi; /* boot panel index, number of panel used during boot */
+ u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
+ struct mrst_timing_info DTD; /* timing info for the selected panel */
+ u32 Panel_Port_Control;
+ u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/
+ u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+ u32 PP_Cycle_Delay;
+ u16 Panel_Backlight_Inverter_Descriptor;
+ u16 Panel_MIPI_Display_Descriptor;
+} __attribute__ ((packed));
+
+#define MODE_SETTING_IN_CRTC 0x1
+#define MODE_SETTING_IN_ENCODER 0x2
+#define MODE_SETTING_ON_GOING 0x3
+#define MODE_SETTING_IN_DSR 0x4
+#define MODE_SETTING_ENCODER_DONE 0x8
+#define GCT_R10_HEADER_SIZE 16
+#define GCT_R10_DISPLAY_DESC_SIZE 28
+
diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h
index 014035f..c2fd475 100644
--- a/drivers/staging/gma500/psb_drv.h
+++ b/drivers/staging/gma500/psb_drv.h
@@ -29,6 +29,7 @@
#include "psb_intel_drv.h"
#include "psb_gtt.h"
#include "psb_powermgmt.h"
+#include "mrst.h"
#include "ttm/ttm_object.h"
#include "psb_ttm_fence_driver.h"
#include "psb_ttm_userobj_api.h"
@@ -243,202 +244,6 @@ struct drm_psb_uopt {
int pad; /*keep it here in case we use it in future*/
};
-struct mrst_vbt {
- s8 signature[4]; /*4 bytes,"$GCT" */
- u8 revision;
- u8 size;
- u8 checksum;
- void *mrst_gct;
-} __attribute__ ((packed));
-
-struct mrst_timing_info {
- u16 pixel_clock;
- u8 hactive_lo;
- u8 hblank_lo;
- u8 hblank_hi:4;
- u8 hactive_hi:4;
- u8 vactive_lo;
- u8 vblank_lo;
- u8 vblank_hi:4;
- u8 vactive_hi:4;
- u8 hsync_offset_lo;
- u8 hsync_pulse_width_lo;
- u8 vsync_pulse_width_lo:4;
- u8 vsync_offset_lo:4;
- u8 vsync_pulse_width_hi:2;
- u8 vsync_offset_hi:2;
- u8 hsync_pulse_width_hi:2;
- u8 hsync_offset_hi:2;
- u8 width_mm_lo;
- u8 height_mm_lo;
- u8 height_mm_hi:4;
- u8 width_mm_hi:4;
- u8 hborder;
- u8 vborder;
- u8 unknown0:1;
- u8 hsync_positive:1;
- u8 vsync_positive:1;
- u8 separate_sync:2;
- u8 stereo:1;
- u8 unknown6:1;
- u8 interlaced:1;
-} __attribute__((packed));
-
-struct gct_r10_timing_info {
- u16 pixel_clock;
- u32 hactive_lo:8;
- u32 hactive_hi:4;
- u32 hblank_lo:8;
- u32 hblank_hi:4;
- u32 hsync_offset_lo:8;
- u16 hsync_offset_hi:2;
- u16 hsync_pulse_width_lo:8;
- u16 hsync_pulse_width_hi:2;
- u16 hsync_positive:1;
- u16 rsvd_1:3;
- u8 vactive_lo:8;
- u16 vactive_hi:4;
- u16 vblank_lo:8;
- u16 vblank_hi:4;
- u16 vsync_offset_lo:4;
- u16 vsync_offset_hi:2;
- u16 vsync_pulse_width_lo:4;
- u16 vsync_pulse_width_hi:2;
- u16 vsync_positive:1;
- u16 rsvd_2:3;
-} __attribute__((packed));
-
-struct mrst_panel_descriptor_v1 {
- u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
- /* Bit 0, Frequency, 15 bits,0 - 32767Hz */
- /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
- u16 Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __attribute__ ((packed));
-
-struct mrst_panel_descriptor_v2 {
- u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
- /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
- u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */
- /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
- u16 Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __attribute__ ((packed));
-
-union mrst_panel_rx {
- struct{
- u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
- /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
- u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
- /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
- u16 SupportedVideoTransferMode:2; /*0: Non-burst only */
- /* 1: Burst and non-burst */
- /* 2/3: Reserved */
- u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
- u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
- u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
- u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
- u16 Rsvd:5;/*5 bits,00000b */
- } panelrx;
- u16 panel_receiver;
-} __attribute__ ((packed));
-
-struct mrst_gct_v1 {
- union{ /*8 bits,Defined as follows: */
- struct {
- u8 PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- u8 BootPanelIndex:2;
- /* 4 panels to use by default*/
- u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- u8 PanelDescriptor;
- };
- struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __attribute__ ((packed));
-
-struct mrst_gct_v2 {
- union{ /*8 bits,Defined as follows: */
- struct {
- u8 PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- u8 BootPanelIndex:2;
- /* 4 panels to use by default*/
- u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- u8 PanelDescriptor;
- };
- struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __attribute__ ((packed));
-
-struct mrst_gct_data {
- u8 bpi; /* boot panel index, number of panel used during boot */
- u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
- struct mrst_timing_info DTD; /* timing info for the selected panel */
- u32 Panel_Port_Control;
- u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u32 PP_Cycle_Delay;
- u16 Panel_Backlight_Inverter_Descriptor;
- u16 Panel_MIPI_Display_Descriptor;
-} __attribute__ ((packed));
-
-#define MODE_SETTING_IN_CRTC 0x1
-#define MODE_SETTING_IN_ENCODER 0x2
-#define MODE_SETTING_ON_GOING 0x3
-#define MODE_SETTING_IN_DSR 0x4
-#define MODE_SETTING_ENCODER_DONE 0x8
-#define GCT_R10_HEADER_SIZE 16
-#define GCT_R10_DISPLAY_DESC_SIZE 28
-
struct drm_psb_private {
/*
* DSI info.
next prev parent reply other threads:[~2011-03-30 9:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-30 8:58 [PATCH 00/18] GMA500 updates Alan Cox
2011-03-30 8:59 ` [PATCH 01/18] gma500: begin adding Moorestown support Alan Cox
2011-03-30 8:59 ` [PATCH 02/18] gma500: Add moorestown lvds driver code Alan Cox
2011-03-30 8:59 ` [PATCH 03/18] gma500: Make some of the lvds operations non-static Alan Cox
2011-03-30 8:59 ` [PATCH 04/18] gma500: Add moorestown config structures Alan Cox
2011-03-30 8:59 ` [PATCH 05/18] gma500: Add moorestown specific data to the device structure Alan Cox
2011-03-30 8:59 ` [PATCH 06/18] gma500: Makefiles Alan Cox
2011-03-30 9:00 ` [PATCH 07/18] gma500: Add Moorestown backlight support Alan Cox
2011-03-30 10:33 ` Matthew Garrett
2011-03-30 9:00 ` [PATCH 08/18] gma500: add framebuffer setup Alan Cox
2011-03-30 9:00 ` [PATCH 09/18] gma500: enable Moorestown CRTC handling Alan Cox
2011-03-30 9:00 ` [PATCH 10/18] gma500: Moorestown does its setup differently Alan Cox
2011-03-30 9:00 ` [PATCH 11/18] gma500: Add Moorestown identifiers Alan Cox
2011-03-30 9:00 ` [PATCH 12/18] gma500: delete the RAR handling Alan Cox
2011-03-30 9:01 ` [PATCH 13/18] gma500: We don't support the CI either Alan Cox
2011-03-30 9:01 ` [PATCH 14/18] gma500: Clean up more unused structures and code Alan Cox
2011-03-30 9:01 ` Alan Cox [this message]
2011-03-30 9:01 ` [PATCH 16/18] gma500; kill off TTM Alan Cox
2011-03-30 9:01 ` [PATCH 17/18] drivers:staging:gma500 Remove extra semi-colon Alan Cox
2011-03-30 9:01 ` [PATCH 18/18] gma500: turn on psb SDVO Alan Cox
2011-03-30 10:35 ` [PATCH 00/18] GMA500 updates Matthew Garrett
2011-03-30 10:23 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110330090118.5897.137.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.