From: cavokz@gmail.com (Domenico Andreoli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] ARM: add QQ2440 machine architecture
Date: Wed, 30 Mar 2011 17:58:08 +0200 [thread overview]
Message-ID: <20110330155808.GA1907@dandreoli.com> (raw)
From: Domenico Andreoli <cavokz@gmail.com>
QQ2440 is an ARM based development board. It is commonly found together
with LCD displays but mine was not so I am not able to support them yet.
Networking bits are already mainlined.
This patch applies cleanly to 2.6.39-rc1
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
---
This is v3 updated for 2.6.39-rc1. It now uses S3C common UDC pullup
pin support and the generic gpio-leds driver.
---
MAINTAINERS | 7
arch/arm/mach-s3c2440/Kconfig | 12
arch/arm/mach-s3c2440/Makefile | 1
arch/arm/mach-s3c2440/mach-qq2440.c | 358 ++++++++++++++++++++++++++
4 files changed, 378 insertions(+)
Index: arm-2.6.git/arch/arm/mach-s3c2440/Kconfig
===================================================================
--- arm-2.6.git.orig/arch/arm/mach-s3c2440/Kconfig 2011-03-30 17:22:10.000000000 +0200
+++ arm-2.6.git/arch/arm/mach-s3c2440/Kconfig 2011-03-30 17:22:48.000000000 +0200
@@ -190,6 +190,19 @@
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
+config MACH_QQ2440
+ bool "QQ2440 development board"
+ select CPU_S3C2440
+ select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select S3C2440_XTAL_12000000
+ help
+ Say Y here to select support for the QQ2440
+
config MACH_RX1950
bool "HP iPAQ rx1950"
select CPU_S3C2442
Index: arm-2.6.git/arch/arm/mach-s3c2440/Makefile
===================================================================
--- arm-2.6.git.orig/arch/arm/mach-s3c2440/Makefile 2011-03-30 17:22:10.000000000 +0200
+++ arm-2.6.git/arch/arm/mach-s3c2440/Makefile 2011-03-30 17:22:48.000000000 +0200
@@ -33,6 +33,7 @@
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_QQ2440) += mach-qq2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
Index: arm-2.6.git/arch/arm/mach-s3c2440/mach-qq2440.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/mach-qq2440.c 2011-03-30 17:45:17.000000000 +0200
@@ -0,0 +1,325 @@
+/* linux/arch/arm/mach-s3c2440/mach-qq2440.c
+ *
+ * Copyright (c) 2011 Domenico Andreoli <cavokz@gmail.com>
+ *
+ * Based on mach-mini2440.c by Michel Pollet <buserror@gmail.com>,
+ * Ramax Lo <ramaxlo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/i2c/at24.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/irqs.h>
+#include <mach/qq2440.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+static struct map_desc qq2440_iodesc[] __initdata = {
+ {
+ .virtual = QQ2440_CS8900_VIRT_BASE,
+ .pfn = __phys_to_pfn(QQ2440_CS8900_PA),
+ .length = QQ2440_CS8900_SZ,
+ .type = MT_DEVICE
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg qq2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qq2440_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPG(12),
+};
+
+/* MMC/SD */
+
+static struct s3c24xx_mci_pdata qq2440_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+/* NAND */
+
+static struct mtd_partition qq2440_default_nand_part[] __initdata = {
+ [0] = {
+ .name = "vivi",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "eboot",
+ .size = SZ_128K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [2] = {
+ .name = "param",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [4] = {
+ .name = "root",
+ .size = 0x03dac000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct s3c2410_nand_set qq2440_nand_sets[] __initdata = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qq2440_default_nand_part),
+ .partitions = qq2440_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand qq2440_nand_info __initdata = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(qq2440_nand_sets),
+ .sets = qq2440_nand_sets,
+ .ignore_unset_ecc = 1,
+};
+
+/* KEYS */
+
+static struct gpio_keys_button qq2440_buttons[] = {
+ {
+ .gpio = S3C2410_GPG(11), /* K1 */
+ .code = KEY_F1,
+ .desc = "Button 1",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPG(3), /* K2 */
+ .code = KEY_F2,
+ .desc = "Button 2",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPF(2), /* K3 */
+ .code = KEY_F3,
+ .desc = "Button 3",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPF(0), /* K4 */
+ .code = KEY_F4,
+ .desc = "Button 4",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qq2440_button_data = {
+ .buttons = qq2440_buttons,
+ .nbuttons = ARRAY_SIZE(qq2440_buttons),
+};
+
+static struct platform_device qq2440_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &qq2440_button_data,
+ }
+};
+
+/* LEDS */
+
+static struct gpio_led qq2440_gpio_leds[] = {
+ {
+ .name = "led1",
+ .gpio = S3C2410_GPB(5),
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }, {
+ .name = "led2",
+ .gpio = S3C2410_GPB(6),
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }, {
+ .name = "led3",
+ .gpio = S3C2410_GPB(7),
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }, {
+ .name = "led4",
+ .gpio = S3C2410_GPB(8),
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data qq2440_gpio_led_info = {
+ .leds = qq2440_gpio_leds,
+ .num_leds = ARRAY_SIZE(qq2440_gpio_leds),
+};
+
+static struct platform_device qq2440_leds = {
+ .name = "gpio-leds",
+ .id = -1,
+ .dev = {
+ .platform_data = &qq2440_gpio_led_info,
+ }
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data qq2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device qq2440_audio = {
+ .name = "s3c24xx-uda134x",
+ .id = -1,
+ .dev = {
+ .platform_data = &qq2440_audio_pins,
+ },
+};
+
+/* I2C */
+
+static struct at24_platform_data at24c08 = {
+ .byte_len = SZ_8K / 8,
+ .page_size = 16,
+};
+
+static struct i2c_board_info qq2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .platform_data = &at24c08,
+ },
+};
+
+static struct platform_device *qq2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &qq2440_leds,
+ &qq2440_button_device,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_iis,
+ &qq2440_audio,
+};
+
+static void __init qq2440_map_io(void)
+{
+ s3c24xx_init_io(qq2440_iodesc, ARRAY_SIZE(qq2440_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(qq2440_uartcfgs, ARRAY_SIZE(qq2440_uartcfgs));
+}
+
+#define QQ2440_CS8900_BANKCON (S3C2410_BANKCON_Tacp6 | S3C2410_BANKCON_Tcah4 | S3C2410_BANKCON_Tcoh1 | \
+ S3C2410_BANKCON_Tacc14 | S3C2410_BANKCON_Tcos4)
+
+static void __init qq2440_init(void)
+{
+ int i;
+
+ /* Ethernet */
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_WS3 | S3C2410_BWSCON_ST3, S3C2410_BWSCON);
+ __raw_writel(QQ2440_CS8900_BANKCON, S3C2410_BANKCON3);
+ irq_set_irq_type(QQ2440_CS8900_IRQ, IRQ_TYPE_EDGE_RISING);
+
+ /* mark the key as input, without pullups (there is one on the board) */
+ for (i = 0; i < ARRAY_SIZE(qq2440_buttons); i++) {
+ s3c_gpio_setpull(qq2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(qq2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+ }
+
+ s3c24xx_udc_set_platdata(&qq2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&qq2440_mmc_cfg);
+ s3c_nand_set_platdata(&qq2440_nand_info);
+
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, qq2440_i2c_devs, ARRAY_SIZE(qq2440_i2c_devs));
+
+ platform_add_devices(qq2440_devices, ARRAY_SIZE(qq2440_devices));
+}
+
+MACHINE_START(QQ2440, "QQ2440")
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = qq2440_map_io,
+ .init_machine = qq2440_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
Index: arm-2.6.git/MAINTAINERS
===================================================================
--- arm-2.6.git.orig/MAINTAINERS 2011-03-30 17:22:10.000000000 +0200
+++ arm-2.6.git/MAINTAINERS 2011-03-30 17:22:48.000000000 +0200
@@ -967,6 +967,13 @@
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QQ2440 MACHINE SUPPORT
+M: Domenico Andreoli <cavokz@gmail.com>
+L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s3c2440/include/mach/qq2440.h
+F: arch/arm/mach-s3c2440/mach-qq2440.c
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
Index: arm-2.6.git/arch/arm/mach-s3c2440/include/mach/qq2440.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/include/mach/qq2440.h 2011-03-30 17:22:48.000000000 +0200
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-s3c2440/include/mach/qq2440.h
+ *
+ * Copyright (c) 2011 Domenico Andreoli <cavokz@gmail.com>
+ *
+ * QQ2440 - platform definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_MACH_QQ2440_H
+#define __ASM_MACH_QQ2440_H
+
+#define QQ2440_CS8900_IRQ IRQ_EINT9
+
+#define QQ2440_CS8900_VIRT_BASE ((unsigned long) S3C_ADDR(0x00500000))
+#define QQ2440_CS8900_PA (S3C2410_CS3 + 0x1000000)
+#define QQ2440_CS8900_SZ SZ_1M
+
+#endif /* __ASM_MACH_QQ2440_H */
reply other threads:[~2011-03-30 15:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110330155808.GA1907@dandreoli.com \
--to=cavokz@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.