From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 06 Apr 2011 22:54:56 +0000 Subject: Re: [lm-sensors] testing "w83627ehf" and "k10temp" on ASRock E350M1 Message-Id: <20110406225456.GB27691@ericsson.com> List-Id: References: <4D9CA530.9030100@yandex.ru> In-Reply-To: <4D9CA530.9030100@yandex.ru> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Wed, Apr 06, 2011 at 01:38:56PM -0400, Aleksej Serdjukov wrote: > Hi. >=20 > I've got this computer with ASRock E350M1, and have no idea what the=20 > temperatures should actually be. >=20 > This is on Debian 6.0: > Linux 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux >=20 >=20 > IIRC, UEFI Setup was showing about 52=B0C on the motherboard or chipset, = > and 49-52 on the CPU. >=20 > About a week ago I've installed the "w83627ehf" from=20 > , and saw that those=20 > temperatures don't go over 53 or 54=B0C. So I changed the UEFI setting=20 > more and more for slower fan speed (today it was 6). So the speed was=20 > about 4000, while the full speed is about 4900 and 9 is a hundred or a=20 > couple of hundred less. Temperatures didn't go over 54 (or maybe 55) =B0C= .=20 > Idle CPU (at 800MHz thanks to Cool'n'Quiet) went down to 46=B0C more and = more. >=20 > Today, however, while the CPU was not loaded much, the fan appeared to=20 > be full speed again (at least according to the sensors applet). >=20 > But the new sensors-detect was also mentioning "k10temp" (and the old=20 > one in Debian didn't work), so today I installed a new k10temp, and it=20 > showed 60=B0C for something. >=20 > Now I have set the fan speed to full in UEFI, and here is what "sensors" = > shows: >=20 >=20 > nct6775-isa-0290 > Adapter: ISA adapter > Vcore: +1.08 V (min =3D +0.00 V, max =3D +1.74 V) > in1: +1.03 V (min =3D +0.00 V, max =3D +0.00 V) ALARM Possibly 12V (*12) > AVCC: +3.33 V (min =3D +2.98 V, max =3D +3.63 V) > +3.3V: +3.33 V (min =3D +2.98 V, max =3D +3.63 V) > in4: +1.39 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in5: +1.86 V (min =3D +0.00 V, max =3D +0.00 V) ALARM No idea what in4/in5 might be. > in6: +1.66 V (min =3D +0.00 V, max =3D +0.00 V) ALARM This one might be 5V (*3) Guenter > 3VSB: +3.44 V (min =3D +2.98 V, max =3D +3.63 V) > Vbat: +3.39 V (min =3D +2.70 V, max =3D +3.30 V) ALARM > fan1: 0 RPM (min =3D 0 RPM, div =3D 128) > fan2: 4963 RPM (min =3D 0 RPM, div =3D 8) ALARM > fan3: 0 RPM (min =3D 0 RPM, div =3D 128) > fan4: 0 RPM (div =3D 128) > SYSTIN: +51.0=B0C (high =3D +0.0=B0C, hyst =3D +0.0=B0C) ALARM = sensor =3D=20 > thermistor > CPUTIN: +45.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D thermistor > AUXTIN: -9.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D thermistor > cpu0_vid: +0.000 V >=20 > k10temp-pci-00c3 > Adapter: PCI adapter > temp1: +58.0=B0C (high =3D +70.0=B0C, crit =3D +75.0=B0C) >=20 > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors