[ath9k-devel] Wrt TP-Link TL-WN821N V3 (confusing/missing info on wiki)

[Maciej Mrozowski <reavertm@gmail.com>]

On Sunday 24 of April 2011 10:41:16 Sujith wrote:

Hello

> > (it stopped working completely recently in wireless-testing though:
> > ieee80211 phy0: device no longer idle - working
> > wlan0: direct probe to 68:7f:74:77:36:bc (try 1/3)
> > wlan0: direct probe to 68:7f:74:77:36:bc (try 2/3)
> > wlan0: direct probe to 68:7f:74:77:36:bc (try 3/3)
> > wlan0: direct probe to 68:7f:74:77:36:bc timed out
> > ieee80211 phy0: device now idle
> > but that's different a story)
> 
> How recent is your wireless-testing tree ?
> 
> Can you post the debug log ?
> See: http://wireless.kernel.org/en/users/Drivers/ath9k/debug

It was some wireless-testing master from around a week ago.
Now I've re-cloned it again (since git pull resulted in conflicts for some 
reason), I'm at 903e9c0102cb9b4b3b1560df31f9b46650cdea88 and using htc_7010.fw 
from http://wireless.kernel.org/download/htc_fw/1.1/ - and so far so good :)

I'll testfield it for a while and see whether it drops connection after some 
time or after "some bandwidth is exceeded" like it appeared to in a past (but 
if was at times when the most recent firmware was still sitting in linux-
firmware repo, I think I experienced the same results with stock kernel 2.6.37 
ath9k_htc driver and corresponding wireless-testing, many things has changes 
since then and I'm optimistic)

regards
MM

(that's not exactly full debug, just I quick look, if there are to be any 
issues, I'll provide full debug respectively)
(btw, sorry for mistaken crosspost to linux-wireless@ - it's second time I 
fail today in this regard...)

usb 1-2: new high speed USB device number 5 using ehci_hcd
usb 1-2: ath9k_htc: Transferred FW: htc_7010.fw, size: 72996
ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.1
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 
MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 
MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 
MHz wide channel
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width 
channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Pending regulatory request, waiting for it to be processed...
ieee80211 phy2: Atheros AR9287 Rev:2
Registered led device: ath9k-phy2::radio
Registered led device: ath9k-phy2::assoc
Registered led device: ath9k-phy2::tx
Registered led device: ath9k-phy2::rx
usb 1-2: ath9k_htc: USB layer initialized
ieee80211 phy2: device now idle
cfg80211: Pending regulatory request, waiting for it to be processed...
ieee80211 phy2: device no longer idle - scanning
ieee80211 phy2: device now idle
ieee80211 phy2: device no longer idle - working
wlan0: authenticate with 68:7f:74:77:36:bc (try 1)
wlan0: authenticated
wlan0: associate with 68:7f:74:77:36:bc (try 1)
wlan0: RX AssocResp from 68:7f:74:77:36:bc (capab=0x531 status=0 aid=1)
wlan0: associated
ieee80211 phy2: Allocated STA 68:7f:74:77:36:bc
ieee80211 phy2: Inserted STA 68:7f:74:77:36:bc
ieee80211 phy2: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 
uapsd=0
ieee80211 phy2: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 
uapsd=0
ieee80211 phy2: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 
uapsd=0
ieee80211 phy2: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
cfg80211: Pending regulatory request, waiting for it to be processed...
Rx A-MPDU request on tid 7 result 0
Open BA session requested for 68:7f:74:77:36:bc tid 0
activated addBA response timer on tid 0
switched off addBA timer for tid 0
Aggregation is on for tid 0
Rx A-MPDU request on tid 0 result 0

-- 
regards
MM
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110428/704b7a56/attachment-0001.pgp