From: Dan Williams <dan.j.williams@intel.com>
To: james.bottomley@suse.de
Cc: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
Jack Wang <jack_wang@usish.com>
Subject: [PATCH 3/3] libsas: check dev->gone before submitting sata i/o
Date: Tue, 03 May 2011 11:36:32 -0700 [thread overview]
Message-ID: <20110503183632.21471.63803.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110503183526.21471.84735.stgit@localhost6.localdomain6>
Head off doomed-to-fail i/o in sas_queuecommand before sending it down
the ata path.
Before:
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
sd 7:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
sd 7:0:0:0: [sdd] Add. Sense: No additional sense information
sd 7:0:0:0: [sdd] Stopping disk
After:
sd 9:0:0:0: [sdd] Synchronizing SCSI cache
sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 9:0:0:0: [sdd] Stopping disk
sd 9:0:0:0: [sdd] START_STOP FAILED
sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
This is a cosmetic change as sata i/o can still leak to a gone device,
but this addresses the nominal hotplug case when releasing the target.
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/libsas/sas_scsi_host.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1787bd2..ce3efff 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -218,6 +218,13 @@ int sas_queuecommand(struct scsi_cmnd *cmd,
struct sas_ha_struct *sas_ha = dev->port->ha;
struct sas_task *task;
+ /* If the device fell off, no sense in issuing commands */
+ if (dev->gone) {
+ cmd->result = DID_BAD_TARGET << 16;
+ scsi_done(cmd);
+ goto out;
+ }
+
if (dev_is_sata(dev)) {
unsigned long flags;
@@ -228,13 +235,6 @@ int sas_queuecommand(struct scsi_cmnd *cmd,
goto out;
}
- /* If the device fell off, no sense in issuing commands */
- if (dev->gone) {
- cmd->result = DID_BAD_TARGET << 16;
- scsi_done(cmd);
- goto out;
- }
-
res = -ENOMEM;
task = sas_create_task(cmd, dev, GFP_ATOMIC);
if (!task)
prev parent reply other threads:[~2011-05-03 18:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 18:36 [PATCH 0/3] libsas fixlets for 2.6.40 Dan Williams
2011-05-03 18:36 ` [PATCH 1/3] libsas: flush initial device discovery before completing ->scan_finished() Dan Williams
2011-05-04 1:14 ` [PATCH 1/3] libsas: flush initial device discovery before completing->scan_finished() Jack Wang
2011-05-03 18:36 ` [PATCH 2/3] libsas: fix/amend device gone notification in sas_deform_port() Dan Williams
2011-05-06 0:13 ` Dan Williams
2011-05-06 23:43 ` Dan Williams
2011-05-03 18:36 ` Dan Williams [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110503183632.21471.63803.stgit@localhost6.localdomain6 \
--to=dan.j.williams@intel.com \
--cc=jack_wang@usish.com \
--cc=james.bottomley@suse.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.