From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: axboe@kernel.dk
Cc: mikem@beardog.cce.hp.com, akpm@linux-foundation.org,
thenzl@redhat.com, linux-kernel@vger.kernel.org,
smcameron@yahoo.com
Subject: [PATCH 03/16] cciss: factor out command pool allocation functions
Date: Tue, 03 May 2011 14:53:05 -0500 [thread overview]
Message-ID: <20110503195305.5154.73383.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20110503194919.5154.78352.stgit@beardog.cce.hp.com>
From: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/block/cciss.c | 67 ++++++++++++++++++++++++++-----------------------
1 files changed, 36 insertions(+), 31 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index ed6aa83..152cb40 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4653,6 +4653,39 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
return 0;
}
+static __devinit int cciss_allocate_cmd_pool(ctlr_info_t *h)
+{
+ h->cmd_pool_bits = kmalloc(
+ DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG) *
+ sizeof(unsigned long), GFP_KERNEL);
+ h->cmd_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ &(h->cmd_pool_dhandle));
+ h->errinfo_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ &(h->errinfo_pool_dhandle));
+ if ((h->cmd_pool_bits == NULL)
+ || (h->cmd_pool == NULL)
+ || (h->errinfo_pool == NULL)) {
+ dev_err(&h->pdev->dev, "out of memory");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void cciss_free_cmd_pool(ctlr_info_t *h)
+{
+ kfree(h->cmd_pool_bits);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ h->errinfo_pool, h->errinfo_pool_dhandle);
+}
+
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
@@ -4745,23 +4778,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
h->devname, pdev->device, pci_name(pdev),
h->intr[PERF_MODE_INT], dac ? "" : " not");
- h->cmd_pool_bits =
- kmalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
- * sizeof(unsigned long), GFP_KERNEL);
- h->cmd_pool = (CommandList_struct *)
- pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(CommandList_struct),
- &(h->cmd_pool_dhandle));
- h->errinfo_pool = (ErrorInfo_struct *)
- pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(ErrorInfo_struct),
- &(h->errinfo_pool_dhandle));
- if ((h->cmd_pool_bits == NULL)
- || (h->cmd_pool == NULL)
- || (h->errinfo_pool == NULL)) {
- dev_err(&h->pdev->dev, "out of memory");
+ if (cciss_allocate_cmd_pool(h))
goto clean4;
- }
/* Need space for temp scatter list */
h->scatter_list = kmalloc(h->max_commands *
@@ -4837,21 +4855,12 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
return 1;
clean4:
- kfree(h->cmd_pool_bits);
+ cciss_free_cmd_pool(h);
/* Free up sg elements */
for (k-- ; k >= 0; k--)
kfree(h->scatter_list[k]);
kfree(h->scatter_list);
cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
- if (h->cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(CommandList_struct),
- h->cmd_pool, h->cmd_pool_dhandle);
- if (h->errinfo_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(ErrorInfo_struct),
- h->errinfo_pool,
- h->errinfo_pool_dhandle);
free_irq(h->intr[PERF_MODE_INT], h);
clean2:
unregister_blkdev(h->major, h->devname);
@@ -4949,11 +4958,7 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
iounmap(h->cfgtable);
iounmap(h->vaddr);
- pci_free_consistent(h->pdev, h->nr_cmds * sizeof(CommandList_struct),
- h->cmd_pool, h->cmd_pool_dhandle);
- pci_free_consistent(h->pdev, h->nr_cmds * sizeof(ErrorInfo_struct),
- h->errinfo_pool, h->errinfo_pool_dhandle);
- kfree(h->cmd_pool_bits);
+ cciss_free_cmd_pool(h);
/* Free up sg elements */
for (j = 0; j < h->nr_cmds; j++)
kfree(h->scatter_list[j]);
next prev parent reply other threads:[~2011-05-03 19:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 19:52 [PATCH 00/16] cciss: May 3, 2011 updates Stephen M. Cameron
2011-05-03 19:52 ` [PATCH 01/16] cciss: add readl after writel in interrupt mask setting code Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 02/16] cciss: do a better job of detecting controller reset failure Stephen M. Cameron
2011-05-03 19:53 ` Stephen M. Cameron [this message]
2011-05-03 19:53 ` [PATCH 04/16] cciss: factor out scatterlist allocation functions Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 05/16] cciss: factor out irq request code Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 06/16] cciss: fix reply pool and block fetch table memory leaks Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 07/16] cciss: get rid of message related magic numbers Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 08/16] cciss: increase time to wait for board reset to start Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 09/16] cciss: clarify messages around reset behavior Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 10/16] cciss: increase timeouts for post-reset no-ops Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 11/16] cciss: use new doorbell-bit-5 reset method Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 12/16] cciss: do soft reset if hard reset is broken Stephen M. Cameron
2011-05-03 19:53 ` [PATCH 13/16] cciss: remove superfluous sleeps around reset code Stephen M. Cameron
2011-05-03 19:54 ` [PATCH 14/16] cciss: do not attempt PCI power management reset method if we know it won't work Stephen M. Cameron
2011-05-03 19:54 ` [PATCH 15/16] cciss: do not use bit 2 doorbell reset Stephen M. Cameron
2011-05-03 19:54 ` [PATCH 16/16] cciss: add cciss_tape_cmds module paramter Stephen M. Cameron
2011-05-06 14:29 ` [PATCH 00/16] cciss: May 3, 2011 updates Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110503195305.5154.73383.stgit@beardog.cce.hp.com \
--to=scameron@beardog.cce.hp.com \
--cc=akpm@linux-foundation.org \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=mikem@beardog.cce.hp.com \
--cc=smcameron@yahoo.com \
--cc=thenzl@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.