From: Lu Guanqun <guanqun.lu@intel.com>
To: ALSA <alsa-devel@alsa-project.org>, Lu Guanqun <guanqun.lu@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>, Koul Vinod <vinod.koul@intel.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
Wang Xingchao <xingchao.wang@intel.com>
Subject: [PATCH v2 00/10] ASoC Support For Moorestown
Date: Fri, 06 May 2011 13:45:57 +0800 [thread overview]
Message-ID: <20110506053852.26312.79083.stgit@localhost> (raw)
This series of patches provides the ASoC implementation of moorestown audio.
This series adds a new codec called upd9976 and a new machine driver called
mrst_machine. The platform driver is mostly re-used.
With this patchset, it can do:
- playback via headphone
- playback via internal speaker
- capture via DMIC
- capture via headset microphone
- jack detection
v2:
- change pr_err to dev_err
- change DAPM widgets' name (adding correct suffix)
- change to data based init of controls, widgets and route in machine driver
- add Master Volume
- change original "HP & Spker Mixer Volume" to "PCM Volume"
- squash some patches into one, resulting in less number of patches
- move jack handling from machine driver to codec driver
- in codec probe, set the bias level to standby instead of off
Thanks for all the reviewers:
- Mark Brown
- Dimitris Papastamos
- Takashi Iwai
- Koul Vinod
Any more comments are welcome. :)
---
Lu Guanqun (8):
ASoC: upd9976: Add Renesas uPD9976 codec driver
ASoC: mrst_machine: add moorestown machine driver
ASoC: upd9976: add DMIC support
ASoC: upd9976: add Analog MIC support
ASoC: upd9976: add jack detection function
ASoC: mrst_machine: add capture functionality
ASoC: mrst_machine: add jack detection support
ASoC: mrst_machine: add initial config to machine driver
Wang Xingchao (2):
ASoC: sst_platform: modify current cpu dai driver to suit the needs for moorestown platform
ASoC: upd9976: add capture ability for dai driver
sound/soc/codecs/Kconfig | 4
sound/soc/codecs/Makefile | 2
sound/soc/codecs/upd9976.c | 697 ++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/upd9976.h | 87 +++++
sound/soc/mid-x86/Kconfig | 12 +
sound/soc/mid-x86/Makefile | 2
sound/soc/mid-x86/mrst_machine.c | 228 ++++++++++++
sound/soc/mid-x86/sst_platform.c | 13 -
8 files changed, 1041 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/codecs/upd9976.c
create mode 100644 sound/soc/codecs/upd9976.h
create mode 100644 sound/soc/mid-x86/mrst_machine.c
--
guanqun
next reply other threads:[~2011-05-06 5:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-06 5:45 Lu Guanqun [this message]
2011-05-06 5:46 ` [PATCH v2 01/10] ASoC: upd9976: Add Renesas uPD9976 codec driver Lu Guanqun
2011-05-06 10:17 ` Mark Brown
2011-05-07 14:21 ` Lu Guanqun
2011-05-07 14:27 ` Mark Brown
2011-05-07 14:43 ` Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 02/10] ASoC: sst_platform: modify current cpu dai driver to suit the needs for moorestown platform Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 03/10] ASoC: mrst_machine: add moorestown machine driver Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 04/10] ASoC: upd9976: add capture ability for dai driver Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 05/10] ASoC: upd9976: add DMIC support Lu Guanqun
2011-05-06 11:07 ` Mark Brown
2011-05-06 5:46 ` [PATCH v2 06/10] ASoC: upd9976: add Analog MIC support Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 07/10] ASoC: upd9976: add jack detection function Lu Guanqun
2011-05-06 12:53 ` Mark Brown
2011-05-06 5:46 ` [PATCH v2 08/10] ASoC: mrst_machine: add capture functionality Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 09/10] ASoC: mrst_machine: add jack detection support Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 10/10] ASoC: mrst_machine: add initial config to machine driver Lu Guanqun
2011-05-06 12:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110506053852.26312.79083.stgit@localhost \
--to=guanqun.lu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
--cc=xingchao.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.