From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@kernel.org
Cc: lwn@lwn.net
Subject: Linux 2.6.33.13
Date: Mon, 9 May 2011 16:14:03 -0700 [thread overview]
Message-ID: <20110509231403.GA2992@kroah.com> (raw)
I'm announcing the release of the 2.6.33.13 kernel.
This is primarily for the use of those people who are stuck using the
.33-rt kernel. Anyone else who really wants to use the .33 kernel tree
is welcome to use this one as well.
I'll be maintaining it for a while longer as it looks like the -rt tree
isn't moving forward to any newer kernel any time soon.
The updated 2.6.33.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/longterm/linux-2.6.33.y.git
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.33.y.git;a=summary
thanks,
greg k-h
------------
Makefile | 2 +-
arch/arm/kernel/sys_oabi-compat.c | 2 +-
arch/m68k/mm/motorola.c | 2 ++
arch/parisc/mm/init.c | 4 +++-
arch/x86/kernel/cpu/amd.c | 2 +-
arch/x86/kernel/pci-gart_64.c | 9 ++++++++-
block/blk-sysfs.c | 4 +++-
drivers/ata/libata-scsi.c | 24 ++++++++++++++++++------
drivers/char/agp/generic.c | 19 +++++++++++++++----
drivers/char/i8k.c | 7 ++++---
drivers/gpu/drm/radeon/atom.c | 6 +++---
drivers/input/xen-kbdfront.c | 12 +++++++++++-
drivers/media/dvb/b2c2/flexcop-pci.c | 2 +-
drivers/mmc/host/sdhci-pci.c | 1 +
drivers/mmc/host/sdhci.c | 9 ++++++++-
drivers/net/igbvf/igbvf.h | 1 -
drivers/net/wireless/ath/regd_common.h | 1 +
drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-tx.c | 8 ++++++--
drivers/net/wireless/p54/txrx.c | 2 +-
drivers/pci/intel-iommu.c | 15 +++++++++++++--
drivers/s390/block/dasd_eckd.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 23 +++++++++++++++++++++--
drivers/scsi/pmcraid.c | 3 +++
drivers/scsi/scsi_lib.c | 7 ++++++-
drivers/scsi/scsi_sysfs.c | 16 ++++++++--------
drivers/serial/imx.c | 3 ++-
drivers/staging/usbip/vhci_hcd.c | 2 +-
drivers/usb/musb/musb_core.c | 1 +
fs/nfs/inode.c | 26 +++++++++++++++++---------
fs/nfs/nfs4state.c | 4 ++--
fs/nfs/super.c | 9 +++++++++
fs/nfsd/vfs.c | 9 ++++++++-
fs/partitions/ldm.c | 16 ++++++++++++----
fs/ubifs/recovery.c | 26 ++++++++++++++++++++++++++
init/Kconfig | 1 +
net/can/bcm.c | 7 ++++++-
net/can/raw.c | 7 ++++++-
net/ipv4/ip_output.c | 9 ++++++---
net/unix/af_unix.c | 16 +++++++++++++++-
scripts/kconfig/conf.c | 2 +-
sound/soc/codecs/wm_hubs.c | 8 ++++----
42 files changed, 258 insertions(+), 73 deletions(-)
Alan Stern (1):
USB: fix regression in usbip by setting has_tt flag
Alex Deucher (1):
drm/radeon/kms: fix bad shift in atom iio table parser
Alex Williamson (2):
intel-iommu: Unlink domain from iommu
intel-iommu: Fix get_domain_for_dev() error path
Artem Bityutskiy (1):
UBIFS: fix master node recovery
Ben Dooks (1):
mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finish
Ben Hutchings (1):
kconfig: Avoid buffer underrun in choice input
Boris Ostrovsky (1):
x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors
Chris Ball (2):
mmc: sdhci-pci: Fix error case in sdhci_pci_probe_slot()
mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finish
Christian Lamparter (1):
ath: add missing regdomain pair 0x5c mapping
Dan Rosenberg (3):
pmcraid: reject negative request size
mpt2sas: prevent heap overflows and unchecked reads
ARM: 6891/1: prevent heap corruption in OABI semtimedop
Dave Jones (1):
can: Add missing socket check in can/bcm release.
David Rientjes (1):
set memory ranges in N_NORMAL_MEMORY when onlined
Eric W. Biederman (1):
af_unix: Only allow recv on connected seqpacket sockets.
Felipe Balbi (1):
usb: musb: core: set has_tt flag
Fry, Donald H (1):
iwlagn: Support new 5000 microcode.
Greg Kroah-Hartman (1):
Linux 2.6.33.13
Greg Rose (1):
Remove extra struct page member from the buffer info structure
Herbert Xu (1):
udp: Fix bogus UFO packet generation
Igor Mammedov (1):
Input: xen-kbdfront - fix mouse getting stuck after save/restore
James Bottomley (3):
slub: fix panic with DISCONTIGMEM
put stricter guards on queue dead checks
fix oops in scsi_run_queue()
Jason Conti (1):
p54: Initialize extra_len in p54_tx_80211
Jeff Layton (1):
nfs: don't lose MS_SYNCHRONOUS on remount of noac mount
Jim Bos (2):
i8k: Tell gcc that *regs gets clobbered
Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
Joerg Roedel (1):
x86, gart: Make sure GART does not map physmem above 1TB
Liu Yuan (1):
block, blk-sysfs: Fix an err return path in blk_register_queue()
Mark Brown (1):
ASoC: Fix output PGA enabling in wm_hubs CODECs
Michael Schmitz (1):
m68k/mm: Set all online nodes in N_NORMAL_MEMORY
Oliver Hartkopp (1):
can: add missing socket check in can/raw release
Patrick Boettcher (1):
FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pci
Sachin Prabhu (1):
Open with O_CREAT flag set fails to open existing files on non writable directories
Stanislaw Gruszka (1):
iwlwifi: fix skb usage after free
Stefan Haberland (1):
dasd: correct device table
Tejun Heo (1):
libata: set queue DMA alignment to sector size for ATAPI too
Timo Warns (1):
fs/partitions/ldm.c: fix oops caused by corrupted partition table
Trond Myklebust (2):
NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
NFSv4.1: Ensure state manager thread dies on last umount
Uwe Kleine-König (1):
serial/imx: read cts state only after acking cts change irq
Vasiliy Kulikov (2):
agp: fix arbitrary kernel memory writes
agp: fix OOM and buffer overflow
next reply other threads:[~2011-05-09 23:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-09 23:14 Greg KH [this message]
2011-05-09 23:14 ` Linux 2.6.33.13 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110509231403.GA2992@kroah.com \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.